Enko SIGE MULTI-HUB User manual

A
25
KG
300
Min.600
Min.495
E
GF
H
J
K
N
I
M
SIGE MULTI-HUB
INSTALLATION INSTRUCTIONS
A. 1 x Basket
B. 1 x Side Slides Set
C. 1 x Bottom Slides Set
D. 2 x Slides Carter
E. 1 x Cabinet Side Thickness Spacer Kit 18/20mm
F. 1 x Cabinet Side Thickness Spacer Kit 16/19mm
G. 1 x Door Fixing Bracket Kit
H. 2 x Door Fixing Covers
I. 1 x Top Door Fixing Bracket
J. 1 x Top Door Fixing Cover
K. 1 x Frame Back Cover
L. 1 x Spoon Holder Bucket Kit
M. 1 x Knife Holder Bucket Kit
N. 1 x Spice Holder Bucket Kit
O. 1 x Hanging Basket
14 x 4x16 Self-tapping Screws
4 x 6.3x12 Eurovite Screws
2 x M4x8 Screws
8x 3.9x13 Self-tapping Screws
2 x M6x10 Screws
2 x Washers
A
C
B
D
C
E
DF
G
H
I
J
L
M
L
K
P
O
N
O

Place slides B or C respecting showed data and screw them in the cabinet.
NB: Follow the the data on the left for side fixing slides B or the data on the right
for bottom fixing slides C.
37
SECONDO FORO / SECOND HOLE
9
27
288
9
27
A
A/2 A/2
MIDDLE LINE
55
37
18
18
320
18
18
B
148
64 48
B/2 B/2
MIDDLE LINE
8x 4x16
6x 3.9x13
1
2
If using side fixing slides B, choose the E or F parts depending on the cabinet
side thickness, as shown in the table*, Insert the parts in the carter D. If using
bottom fixing slides C, mount the parts E on the carter D as shown in the picture.
3
20mm
16mm
19mm
COMPONENTE
PART
E
F
*
CABINET SIDE THICKNESS
18mm
SIDE 18MM
CLICK!
Screw G brackets on the door respecting showed data.
A
300 163,5
B
300 243

Mount the door on basket A and pre-assemble
the M6x10 screws and washers as shown.
Screw the carter D onto the shelf using the 6.3x12 eurovites.
4
4x 6.3x12
2x M4x8
7
6
Fit basket A on slides B or C.
5CLICK!
Pre-assemble the top door fixing bracket I on basket A.

Adjust the door up and down by turning the eccentric screw, thentighten the two M6x10 screws. Fix the top door fixing bracket I to the door by using two 3.9x13screws.
Adjust the door inclination to the front or to the back, than tighten the two M4x8screws.
Mount the buckets.
8
10
13
9
11
A
2x 3.9x13