Sanipex BAGNO DESIGN Bristol BDM-BIS-453L Series User manual

BDM-BIS-453L-XX
BRISTOL 5 HOLE BATH/SHOWER MIXER WITHOUT HAND SHOWER
www.sanipexgroup.com

IMPORTANT PLEASE READ
 B 
 

 






 L  C 



 x 
           
           
 



     








 









1 2
Assemble the article according to pictures:
-Drill the top according to the dimensions in figure
1
-Insert the uprights and the diverter in the holes
and fix them with the kits supplied (figure 2 - 27/19
thread) according to the dimension in figure 3
-Screw the caps making sure that the o-rings are
underneath the caps (figure 4)
-Insert the spout and the shower support in the
holes and fix them with the kits supplied (figure 5 -
G3/4 thread)
-Connect the hoses according to the drawing and
then connect the hot and cold water supplies
(figure 6).

3 4
56

Note:

Note:

INM-BIS-453L-XX-06-22
www.sanipexgroup.com