Enozo EnozoWASH User manual

EnozoWASH User Manual

2
Contents
1 SAFETY...................................................................................................................................................3
1.1 PROPER USE ..................................................................................................................................3
1.2 CAUTION .......................................................................................................................................3
1.3 IMPORTANT INSTRUCTIONS .........................................................................................................4
2 TECHNICAL DATA ..................................................................................................................................4
3 DESCRIPTION.........................................................................................................................................5
3.1 DESCRIPTION.................................................................................................................................5
3.2 KEY COMPONENTS........................................................................................................................5
3.3 OPERATING INSTRUCTIONS ..........................................................................................................7
4 PREVENTATIVE MAINTENANCE/CLEANING ..........................................................................................8
5 TROUBLESHOOTING..............................................................................................................................8
6 DECOMMISSIONING (STORAGE/DISPOSAL)..........................................................................................9
6.1 Storage..........................................................................................................................................9
6.2 Disposal.........................................................................................................................................9
7 SERVICE ...............................................................................................................................................10
7.1 Service and Warranty..................................................................................................................10
7.2 Service Network –U.S. & Canada ...............................................................................................10

3
1SAFETY
IMPORTANT!
Before initial use, the instructions on operating safety, use and maintenance must be read carefully
and understood. Download and save the user manual for later reference.
1.1 PROPER USE
The EnozoWASH is intended for commercial and industrial use only. It is designed for safe
operation when used as directed. The following general safety precautions provide guidance for
safe use. Failure to comply with the safety precautions or warnings indicated in this manual
violates the safety standards of this equipment. The manufacturer assumes no liability for the
user’s failure to comply with these requirements.
•Read manual before use.
•It may only be used for it intended purpose.
•Product is intended for commercial and industrial use.
•Do not remove warning labels from unit.
•Use only clean, potable water with this product.
•Do not immerse in water. Clean exterior of unit with soft cloth. Do not use harsh or
abrasive cleaners.
•Do not add any cleaning chemicals to the water supply that is used.
1.2 CAUTION
Do not spray towards eyes. In case of eye exposure rinse affected eye(s) thoroughly with clean
water for 5 to 10 minutes. If irritation persists, seek medical attention.
•Use only in properly ventilated area in conformance to all local and national regulations.
•If overly strong odor of ozone is detected discontinue use.
•If respiratory irritation is experienced discontinue use immediately.
•Do not expose unit to extreme heat or open flame.
•Keep out of reach of children.
•Do not drop device.

4
1.3 IMPORTANT INSTRUCTIONS
To avoid appliance damage:
Do not drop the device, dropping the device may cause breakage
Use only clean potable water. Using the device with fluids other than clean potable water may
damage the ozone cell and render the product useless.
Do not run water into the charger port, doing so may short the battery/electronics.
Do not try to operate device without a water connection. Doing so may damage the ozone cell
and render the product useless.
2TECHNICAL DATA
Specifications EnozoWASH
Materials
ABS Plastic
Weight
~ 4 lbs (1.8 kg)
Dimensions
36” L x 4” W x 5” H
Maximum Water Pressure
100 psi
Water Temperature
40°F to 86°F (4°C to 30°C)
Water Quality
Hardness ≤250 ppm CaCO3 (May Extend Life of Unit)
Conductivity >50µS/cm (Do not use distilled or deionized water)
Ambient Air
40°F to 104°F (4°C to 40°C)
Rechargeable Battery
Two 7.4 V 4000mAh Li-ion (Charger uses 100 VAC to 240 VAC,
50/60 Hz)
Useful Battery Life
500 Recharges
Model Number
SW-200

5
3DESCRIPTION
3.1 DESCRIPTION
The EnozoWASH offers a water-based alternative to traditional cleaners and sanitizers. It turns
potable water into aqueous ozone, a sanitizer that kills many common pathogens found on
hard, non-porous surfaces and destroys organic odors.
The electrolytic cell inside the EnozoWASH is created from a proprietary diamond process
technology and generates ozone on-demand from water itself.
3.2 KEY COMPONENTS
1. Adjustable Spray Nozzle
2. Water Outlet
3. Diamond Cell
4. Battery and Electronics
5. Indicator LEDs
6. Spray Trigger
7. Charging Port
8. Water Inlet
Note: Product may vary from illustrations
1
6
5
3
4
2
8
7

6
Included Additional Parts
•Battery Charger
•Hose fitting adapter
•Hose clamp
•Barbed fitting adapter
•Flat Spray Nozzle
Water based Sanitizer
•Proven sanitizer
•Reduces common pathogens
•Destroys odor-causing microorganisms
•Ensures efficacy and compliance to regulations
Dependable, On-Demand Solution
•Ozone (O3) is activated as-needed
•Runs on long lasting rechargeable batteries
•Requires only clean, potable water
•User friendly lights when sanitizer is active
Alternative
•Leaves behind no chemical residue
•Compatible with all surfaces where water may be used
•Eliminates potential errors with mixing or diluting
•Ingredients by weight:
o99.9998% Water
o0.0002% Ozone
oNo fragrance added

7
3.3 OPERATING INSTRUCTIONS
Important: Please read these instructions completely before use
Charge the unit
Before using the EnozoWASH for the first time, charge the battery. The first charge may take up
to 8-10 hours. When charging, the red LED on the EnozoWASH will flash. The charge is complete
when the red LED stops flashing. Note: The device will not operate while connected to the
battery charger.
Connect the battery charger to a 100-240 VAC 50/60 Hz power source. Connect the battery
charger power cord to the EnozoWASH. The system is powered by a 7.4V Li-Ion rechargeable
battery pack. A 100 to 240 VAC 50/60 Hz charger is included. Use only the charger that is
provided.
Connect the Nozzle
Connect the nozzle to the water outlet fitting. The water outlet fitting is the one closest to the
trigger and LED indicators. Screw the nozzle until it is finger tight. Further tighten with a wrench
if water leaks from the fitting.
Connect to a Water Source
The EnozoWASH comes equipped with ¾” NPT fittings installed into it. Also included are fittings
that be used to connect to a portable backpack tank or directly to a hose. The water supply that
is used must provide be pressurized for water to flow through the sprayer. The water supply
should only be connected to the water inlet fitting, which is the fitting that is furthest away from
the trigger and LED indicators.
Connect to a backpack tank - Some backpack tanks will have fittings that will connect
directly to the ¾” fitting. If the desired backpack does not have the fittings, then the
included barbed fitting can be used. Connect one end of the barbed fitting to the water
inlet fitting of the EnozoWASH. Connect the tubing from the backpack to the barbed
fitting, using the hose clamp to tighten.

8
Connect directly to a hose –In order to connect directly to a hose, the ¾” NPT fitting on the
water outlet must be removed and the included hose fitting adapter must be installed. Using a
wrench, remove the NPT fitting from the water outlet. Install the included hose fitting adapter
and tighten with an adjustable pipe wrench. Do not overtighten.
To flow water, press and hold the trigger. Release the trigger to stop water flow. Do not hold
trigger if there is no water flow.
Prime the Ozone Cell
When new, or after long storage, the electrolytic ozone cell in the device may become de-
primed and dry. In this condition the blue light will flash during operation and the red and blue
lights will flash twice once the trigger is released. Before attempting to prime the electrolytic
cells, the device must be fully charged. The first charge can take up to 10 hours.
To prime the cell, spray the unit for 2 minutes or unit the blue lights stops flashing and remains
solid. The cell is now good to use. This process may have to be repeated if the device sits unused
for an extended period.
4PREVENTATIVE MAINTENANCE/CLEANING
1. Charge the EnozoWASH nightly to ensure full battery capacity the next day.
2. Clean the unit with moistened cloth only. Do not use chemical cleaners
3. Do not spray device dry before placing the device into storage
5TROUBLESHOOTING
INDICATOR LIGHTS ON THE ENOZOWASH
Lighted Indicators
System Message
Solid Blue
System is operating properly
Flashing Blue
Reduced ozone is being produce. Check error lights on trigger
release
Three Red Flashes
Battery is low, recharge battery now
Two Red and Blue Flashes
System fault, recharge and try again. If error persists, contact
service department
Flashing Red
Device is charging properly
Solid Red
Device is fully charged, remove charger
All Other Problems
Contact service department

9
6DECOMMISSIONING (STORAGE/DISPOSAL)
6.1 Storage
Remove the device from the water source. Do not spray the device completely dry. Store in a
location where the unit can be positioned so that the trigger cannot be accidently pressed.
6.2 Disposal
Disassembly of the appliance must be performed by qualified specialists according to the
manufacturer’s instructions.
-Follow the local safety regulations.
-Dispose of the appliance in accordance with local regulations.
-It is essential that you observe the laws and regulations for the disposal of environmentally
harmful substances. Obtain detailed information about their disposal –such substances
include plastics and decommissioned battery packs and Li-ion batteries.
Special regulations apply when disposing of used electrical appliances: The customer assumes
responsibility for proper disposal of the delivered product after the end of its service life at the
customers own expense, in accordance with legal regulations.

10
7SERVICE
7.1 Service and Warranty
The manufacturer warrants new equipment to be free of defects due to poor materials or
workmanship for the period of time listed below (following date of the original purchase):
•One year replacement
Exclusions: Certain Enozo parts that are expendable by nature and that need to be replaced
frequently may not be covered. Enozo is not liable under these warranties for repairs or
damages due to improper operation, attempted repairs or installation by unauthorized persons,
alterations, abuse, fire, flood, or acts of nature.
Additionally, this warranty may be voided in the case of:
•Failure to follow instructions for use, care, or maintenance.
•Removal, alteration or defacing of the serial number and other labels
•Service by a non-authorized service company
•Mechanical damage
•Use with any other fluids other than clean, potable water
This warranty is conditional upon receiving notice of any defect subject to this warranty within
thirty (30) days of its original discovery by the Buyer.
7.2 Service Network –U.S. & Canada
Enozo Technologies, Inc
Customer Service: 1-978-233-4847
[email protected]om