Epcom EPB64EW User manual

EPB64EW
Note: It is recommended that this product be installed only by a professional. We do not accept
case of any doubt, please contact a professional to help you.
IMPORTANT.
•
Appropriate safety equipment and tool must be used. Failure to do so may result in•
property damage or serious injury.
Make sure electrical wires, water pipes or gas pipes are not located between the wall.•
•Screwdriver cross head.
•Electric or portable drill.
•
•2/5”(10mm)
embly. You can find the following:
(A) M6x50 Delay Bolt (B) Anchor
(D) M4x12 Bolt
(G) Allen Key
(E) M6x12 Bolt
(C) M6 Washer
(F) M8x12 Bolt
Plaster Wall Concrete Wall
Post center
Wall detector
Ruler Ruler
Use the help of alevel tool
Use a pencil to mark where the
mount will be installed
Use the help of a level tool
Use a pencil to mark where the
mount will be installed

Insert a concrete hole in each hole
Place the mounng rail on the wall, fixing
it with bolts (A) and washer (C). Place the mounng rail on the wall, fixing
it with bolts (A) and washer (C).
Compable with flat back screens.
Do not use the M6 washer, if using the M8 bolt
Adjust or loosen the lt knob to fix the
screen in place