EQK 19S-EACH9R1W/C User manual

Thank you very much for purchasing our air conditioner. Please read this owen's manual carefully before
using your air conditioner.
Model No.: 19S-EACH9R1W/C 19S-EACH9R2W/C 19S-EACH12R1W/C
19S-EACH12R2W/C 19S-EACH18R2W/C 19S-EACH24R2W/C
17S-EACH36R2W/C
User Manual
19SEER Mini Split Air Conditioner

Safety Precautions
Name Of Parts
Remote Control
Operation Instructions
Installation Precautions
Indoor Unit Installation
Outdoor Unit Installation
Test Operation
1
4
6
13
14
15
20
23
Maintenance
Troubleshooting
25
26
THANK YOU
Congratulations on your purchase and welcome to the Family.
Your new Air Conditioner combines high-efficiency operation with portable convenience.
By following the operating and care instructions in this manual, your air conditioner will
provide you with many years of reliable service.
Please visit our website www.eqkhvac.com
For any questions or Technical Support,
please contact us by mail [e-mail] or by phone [phone].

1
SAFETY PRECAUTIONS
1. Read this guide before installing and using the appliance.
2. D
forbidden to children. Unforeseeable accidents could happen.
3. M
4. C
.
5. C
6. P
7. E
8. Cet changed.
9. T
10. Tsons.
11. Dances
12.
er
13. T
er for disposal.
14.
15. T
16. B.
17. T
18. T
stand
SAFETY RULES AND RECOMMENDATIONS FOR THE INSTALLER

2
SAFETY PRECAUTIONS
.
SAFETY RULES AND RECOMMENDATIONS FOR THE INSTALLER
19. D
20. C
21. E
22. D
23. Tt not be used
c.
24.
25. T
.
26. Tap
27. N
28.
.
29. T
30. Hacturer
31. U
32. T
33. E
34.

3
SAFETY PRECAUTIONS
.
1. D
2. D
3. D
4. D
5.
6. D
sources of heat.
7. T
8. D
9. D
10. D
11.
12. D
13. D
14. N.
15. C
SAFETY RULES AND PROHIBITIONS

4
NAME OF PARTS
Emergency button
Front panel
Indoor Unit
Outdoor Unit
Note: This figure shown may be different from the actual object. Please take the latter as the
standard.
Mounting plate
Air inlet
Drainage pipe
Wiring cover
Connection wiring
Valve protective cover
With the protective cover removed
Liquid valve
(High pressure valve)
Gas valve
(Low pressure valve)
Refrigerant
Air deflector and flap
Air outlet
Air outlet
Air filter

5
NAME OF PARTS
Indoor Display
The shape and position of s itches and indicators a be different according to the ode
but their function is the sa e.
1
2
3
1
5342
1
2
3
dicator for T er te perature and Error codes.
Lights up during T er operation.
LEEP ode
4
5

6
REMOTE CONTROL
Remote control DISPLAY
Symbols
Cooling Mode
Fan speed:
Mute function
ture indicator
Meaning
EC Mode
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

7
REMOTE CONTROL
No.
To select the ode of opera n ( RY
To a te ea te the TUR func n.
To decrease t peratur or Ti r set g hours.
To increase t peratur or Ti r set g hours.
To turn o off the air conditioner .
To select the fan speed of aut high.
8
11
6
7
9
1
2
3
4
5
To a te ea te the E func n.
EC
To set the t e for er on .
To s tch the func LEEP.
10
To s tch the LED disp .
Y
To stop or start ho ontal lo er nt or set the desired up n air f dire on.
12
13
To s tch the EEL fun on.
14
To s tch the MUTE fun on.
MUTE
Long press to a te ea te the GEN func n (depending on odels
To stop or start ho ontal lo er nt or set the desired le rightair direc n.
15
To s tch the LD func n.
16
To a te ea te the C LD un on.
17
To a te ea te th EL LE func n (depending on odels
18
To a te ea te the GENTL D fun on (depending o odels
MUTE
19
To a te ea te the H LTH func n (depending on odels
Y
Long press to a te ea te the 8 heating func n (depending on odels
oC

8
REMOTE CONTROL
e Control.
.
Cool
Heat
C
F
indoor unit.
appliances.

9
REMOTE CONTROL
COOLING MODE HEATING MODE
HEAT
MODE
MODE
COOL
(For North American market)
frost
DRY MODE
DRY
Press MODE
FAN MODE (Not F
FAN .
To set the F MODE
AUTO MODE
AUTO
MODE
ture.
FAN
Press FAN
1. Long press MODE and TIMER

10
REMOTE CONTROL
appliance.
appliance.
an set the
2. Press the TIMER
.
3. Press TIMER
TIMER
Note:
cancelled.
TIMER
TIMER
Flaps
.
aps
.
the current angle.
.
the current angle.
ether
SWING
SWING
SWING
SWING
TURBO
TURBO
te the highest fan
.
1. Press TIMER
hours.
3. Press TIMER
MODE
FAN
TIMER

11
REMOTE CONTROL
MUTE
1. Press MUTE
.
Press I FEEL
ou and ensure
er.
I FEEL
DISPLA (Indoor display)
DISPLAY
LED displa
panel.
Press DISPLAY
the panel. Press ag tch on the
LED displa
ECO
Press the ECO
Press again to cancel it.
Note:
SLEEP
Press SLEEP
.

12
REMOTE CONTROL
appliance.
.
.
ou can
the process.
cancelled.
SWING
SWING
8
oC
1. Long press ECO
(
o o
8 C 46 F
oC
o
(46
o o
C (48
oC
o
(64
it
unit
o o
Te F (30
o o o o
41 F (5 F (30
es.

13
OPERATION INSTRUCTIONS
tte pt to use the air conditioner under the te perature be ond the specified range a cause
the air conditioner protection de ice to start and the air conditioner a fail to operate. Therefore
tr to use the air conditioner in the follo ing te perature conditions.
t beeps brief once.
t eeps beeping for a hile
ith the po er supp connected restart the air conditioner after shutdo n or s itch it to other
ode during operation and the air conditioner protection de ice ill start. The co pressor ill
resu e operation after 3 inutes.
Characteristics of heating operation (applicable to Heating pump)
t beeps brief t ice.
.
Current status Enter mode
Respond
Operation
tandb
Running
tandb
( nl for heating pu p
Press the e ergenc button
tice in 3 seconds
Cooling ode
ff ode
Heating ode
Press the rgen bu
once
Press the rgen bu
once
Inverter air conditioner:
027
15 24
Dry
Heating Cooling
Roo te perature 17 32
utdoor te perature
Temperature
MODE
T3 cli ate: 15 55
(Lo te perature
heating: 20 24
50

14
INSTALLATION PRECAUTIONS
Torque Parameters
PIPE Size
1 4 ( 6.35
3 8 ( 9.52
1 2 ( 12
5 8 ( 15.88
Newton meter[N x m]
18 20
30 35
45 50
60 65
Pound-force foot (1bf-ft) Kilogram-force meter (kgf-m)
24.4 27.1
40.6 47.4
61.0 67.7
81.3 88.1
2.4 2.7
4.1 4.8
6.2 6.9
8.2 8.9
Maximum Operating Current
of Air Conditioner (A)
Specification of
Socket or Switch (A)
2.5
6.0
1.5
4.0
16
25
32
40
1.0
Fuse Specification (A)
10 and 15
10
32
32
64
64
20
Minimum Wire Cross-sectional
2
Area(mm )
15 and 24
24 and 28
28 and 32
0.75
810 20
8 and 10
Dedicated Distribution Device and Wire for Air Conditioner
Note: This table is only for reference, the installation shall meet the requirements of local laws
and regulations.
Pipe Length and Additional Refrigerant
Inverter Models Capacity (Btu/h)
9K-12K 18K-36K
Lenght of pipe with standard charge
Maximum distance between indoor and outdoor unit
Additional refrigerant charge
Max. diff. in level between indoor and outdoor unit
Type of refrigerant
15
10
20g
R22 R410 R32
15
10
15g
25
10
30g
R22 R410 R32
25
10
25g
5 5 5 5
Lenght of pipe with standard charge (Like: North American, etc.)
7.57.57.57.5

15
INDOOR UNIT INSTALLATION
1.1 Ensure the installation co plies ith the installation in u d ensions (defined belo and
eets the in u and a u connecting piping length and a u change in ele ation
as defined in the ste Re uire ents section.
1.2 ir inlet and outlet ill be clear of obstructions ensuring proper airflo throughout the roo .
1.3 Condensate can be easil and safe drained.
1.4 ll connections can be easil ade to outdoor unit.
1.5 ndoor unit is out of reach of children.
1.6 ounting all strong enough to ithstand four t es the full eight and ibration of the unit.
1.7 Filter can be easil accessed for cleaning.
1.8 Lea e enough free space to allo access for routine aintenance.
1.9 nstall at least 10 ft. (3 a a fro the antenna of T set or radio. peration of the air
conditioner a interfere ith radio or T reception in areas here reception is ea . n
a plifier a be re uired for the affected de ice.
1.10 Do not install in a laundr roo or b a s ing pool due to the corros e en iron ent.
Minimum Indoor Clearances
Step1: Select Installation location
Floor
Ceiling
13c 13c
250c
20c

16
INDOOR UNIT INSTALLATION
Step3: Drill Wall Hole
70mm
all slee
all slee er
tdoor
oor all b ue angle
Step2: Install Mounting Plate
.
ate drainage.
Note:
(Ma e sure the ounting plate is fir enough and flat against the all after installation.
(This figure sho n a be different fro the actual ob ct please ta e the latter as the standard.
2.8

17
INDOOR UNIT INSTALLATION
4.1 ccording to the all hole position select the appropriate piping ode.
There are three optional piping odes for indoor units as sho n in the figure belo :
Piping Mode 1 or Piping Mode 3 a notch should be ade b using scissors to cut the plastic
sheet of piping outlet and cable outlet on the corresponding side of the indoor unit.
Note: hen cutting off the plastic sheet at the outlet the cut should be tr ed to s ooth.
3
2
1
Piping outlet
Cable outlet
Step4: Connecting Refrigerant Pipe
4.2 Bending the connecting pipes ith the port facing up as sho n in the figure.
N
YE
4.3 Ta e off the plastic co er in the pipe ports and ta e off the protect e co er on the end of piping
connectors.
4.4 Chec hether there is an sundr on the port of the connecting pipe and a e ensure the port
is clean.
4.5 fter align the center rotate the nut of the connecting pipe to tighten the nut as tight as possible
b hand.
4.6 Use a tor ue rench to tighten it according to the tor ue alues in the tor ue re uire ents table;
(Refer to the tor ue re uire ents table on section INSTALLATION PRECAUTIONS
4.7 rap the oint ith the insulation pipe.

18
INDOOR UNIT INSTALLATION
5.1 d st the drainage hose(if applicable
so e ode both sides of the indoor unit are pro ided ith drainage ports ou can choose
one of the to attache the drainage hose. nd plug the unused drain port ith the rubber
attached in one of the ports.
Step5: Connect Drainage Hose
5.2 Connect the drainage hose to the drainage port ensure the oint is fir and the sealing
effect is good.
5.3 rap the oint fir ith teflon tape to ensure no lea s.
Note: Ma e sure there is no t ists or dents and the pipes should be placed obli ue
do n ard to a oid bloc age to ensure proper drainage.
Step6: Connect Wiring
6.1 Choose the right cables s e deter ined b the a u operating current on the na eplate.
(Chec the cables s e refer to section INSTALLATION PRECAUTIONS)
6.2 pen the front panel of indoor unit.
6.3 Use a scre dr er open the electric control bo co er to re eal the ter inal bloc .
6.4 Unscre the cable cla p.
6.5 nsert one end of the cable into the position
of control bo fro the bac of the right end
of the indoor unit.
6.6 Connect the ires to corresponding ter inal
according to the iring diagra on the electric
control bo co er. nd a e sure that the are
ell connected.
6.7 cre the cable cla p to fasten the cables.
6.8 Reinstall the electric control bo co er and
front panel.
Drainage ports
Control bo
co er
iring diagra
Front panel