eufy Security eufyCam 2 Pro User manual

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries. All other trademarks are the property of their respective owners.
51005002224 V01
USER MANUAL
eufyCam 2 Pro
WIRE-FREE HD SECURITY CAMERA SET

Product Overview
TABLE OF
CONTENTS
01
02
03
04
05
10
11
Connecting the HomeBase 2
Charging eufyCam 2 Pro
Setting Up the System
Mounting the Camera
What's Included
Safety Statement

HomeBase 2
(T8010)
Mounting
Bracket
Power Adapter
for HomeBase 2
Micro-USB
Charging Cable
Ethernet
Cable
For HomeBase 2 Installation
For eufyCam 2 Pro Installation
Mounting Screws
and Anchors
1. Camera quantity and accessories vary by
bundle package.
2. HomeBase 2 power adapter varies by region.
HomeBase 2
eufyCam 2 Pro
1. Status LED
2. Speaker
3. Power port
4. USB port
5. Ethernet port
6. SYNC/ALARM OFF button
7. Reset button
1. Photosensitive sensor
2. Camera len
3. Motion sensor
4. Microphone
5. LED indicator
6. Sync button
7. USB charging port
8. Screw hole
2
3
4 5 6
7
1
01 02
Metal Pin
for Resetting
Indoor Mount Hook
(for Indoor Mount)
eufyCam 2 Pro
(T8140)
WHAT’S
INCLUDED
12PRODUCT
OVERVIEW
3
4
5
6
2
1
1
8
7

1. Power on the HomeBase 2, then use the ethernet cable provided to
connect the HomeBase 2 to your home router.
2. The LED indicator turns blue (this may take up to 1min) when
HomeBase 2 is ready for setup.
Connect the HomeBase 2 to the Internet Download the App and Set up the System
03 04
Download the Eufy Security app from the App Store (iOS devices) or
Google Play (Android devices).
Sign up for a Eufy Security account, then follow the onscreen instruc-
tions to complete the setup.
Note:
• Keep the camera at least 1 ft away from your internal / external hard drives.
• Make sure you place the camera near HomeBase 2 (within the distance of 1 ~ 3 feet).
• Make sure you set up HomeBase 2 and eufyCam 2 Pro on the App before you mount
the cameras.
CONNECTING
THE HOMEBASE 2
34SETTING UP
THE SYSTEM

To find a spot to mount eufyCam 2 Pro, you need to test wireless signal strength.
① Open the Eufy Security app, go to Camera Settings > Mounting Guide.
②To test the wireless signal strength, take your camera and phone to

③Move the camera as close to the HomeBase 2 as possible if the wireless
Hang eufyCam 2 Pro 7-10 ft (2-3 m) above the ground.This height
maximizes the detection range of the motion sensor of eufyCam 2 Pro.
Avoid placing eufyCam 2 Pro under direct sunlight.
Find a Good Mounting Spot
05 06
Select Height and Location
the location where you want to mount the camera.
signal strength is poor.
Motion
Detection
Zone
Camera field
of view
Up to 30 ft (10 m)
7-10 ft
(2 - 3 m)
Motion
Detection
Zone
Camera field
of view
5MOUNTING
THE CAMERA

The camera can be mounted both indoors and outdoors.
1.Turn the knob of the mounting bracket clockwise to loosen and
disassemble it.
2. Drill holes with a 15/64 inch (5.95mm) drill bit, then insert the anchors
into the holes; anchors are necessary for walls that are made out of hard
materials such as concrete, brick, or stucco.
Mount the Camera Outdoors Mount the Camera Outdoors
07 08
3. Firmly screw the base of the mounting bracket onto the wall. Fasten
the ball knob of the bracket to the base of the bracket.
4.Tighten eufyCam 2 Pro to the mounting bracket and adjust the viewing
angle by checking the live stream feed in the Eufy Security app.
Tips:
1.The Homebase 2 pairs up to 16 cameras, you can repeat the steps mentioned above to
add more eufyCam 2 Pro cameras to meet different needs of use.
2. For troubleshooting,check Help on the Eufy Security App. Refer to App page for LED
indicator status.

Mount the Camera Indoors
1009
LED indication
Charging time
Charging: Steady blue
Fully charged：Off
12 hours
Charge eufyCam 2 Pro
Method 1
Method 2
Stick the camera directly to any flat surface made out of iron. Or you can use
the indoor mount to mount the camera:
1. Drill a hole. Use the included anchor if it’s drywall and fasten the hook.
a
2. Hang the indoor mount on the hook.
3. Attach eufyCam 2 Pro to the indoor mount and adjust the viewing angle.
c
CHARGING
EUFYCAM 2 PRO
6
5V/2A

IC Statement
11 12
FCC Statement
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Warning: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment
and receiver. (3) Connect the equipment into
an outlet on a circuit different from that to
which the receiver is connected. (4) Consult the
dealer or an experienced radio/TV technician
for help.
FCC Radio Frequency Exposure
Statement
The device has been evaluated to meet general
RF exposure requirements.The device can be
used in fixed/mobile exposure condition.The
min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices
must be made using shielded cables to maintain
compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue,
WA 98004-5541
Telephone:[phone]
This product complies with the radio
interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that
this device is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU. For the declaration of
conformity, visit the Web site www.eufylife.com
Due to the used enclosure material, the
product shall only be connected to a USB
Interface of version 2.0 or higher.
The adapter shall be installed near the
equipment and shall be easily accessible.
Do not use the Device in the environment at
too high or too low temperature, never expose
the Device under strong sunshine or too wet
environment.
The suitable temperature for HomeBase 2 and
accessories is -10°C-45°C.
The suitable temperature for eufyCam 2 Pro
and accessories is -20°C-50°C.
When charging, please place the device in an
environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an
environment with a temperature that ranges
from 5°C~25°C.
Please ensure to use only the charger offered
by the manufacturer. Using unauthorized
charger may cause danger and violate the
authorization of the device and the guarantee
article.
This charger is for indoor use only
The charger type is ASSA67W-120200, output
voltage/current is 12Vdc/2A.The plug
considered as disconnect device of adapter. RF
exposure information:The Maximum
Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm
between the device and the human body.To
maintain compliance with RF exposure
requirement, use product that maintain a 20cm
distance between the device and human body.
CAUTION RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Wi-Fi Operating Frequency
Range:2412~2472MHz ;Wi-Fi Max Output
Power:17.13dBm(ERIP for
T8010),17.47dBm(ERIP for T8140)
SUB-1G Frequency range:
866~866.8MHz;SUB-1G Output
Power:5.492dBm
The following importer is the responsible party
(contact for EU matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205
Kings Road,Tyseley, Birmingham, B11 2AA,
United Kingdom
This product is designed and
manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must
not be discarded as household waste, and
should be delivered to an appropriate
collection facility for recycling. Proper disposal
and recycling helps protect natural resources,
human health and the environment. For more
information on disposal and recycling of this
product, contact your local municipality, disposal
service, or the shop where you bought this
product.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device."
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement."
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of
20cm from the body to ensure compliance
with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une
distance de 20 cm du corps afin de vous
conformer aux exigences en matière
d'exposition RF.
7 SATETY
STATEMENT

Customer Service
13
Warranty
12-month limited warranty
Call Us
United States [phone] Mon-Fri 9am-5pm (PT)
United Kingdom [phone] Mon-Fri 6am-11am (GMT)
Germany [phone] Mo-Fr 6:00-11:00
Email Us
Customer Support: suppor[email protected]
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Use of theWorks with Apple HomeKit badge means that an electronic
accessory has been designed to connect specifically to iPod touch, iPhone, or
iPad, respectively, and has been certified by the developer to meetApple
performance standards.Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards.
8 LEGAL
NOTICE