Everet EVP220 User manual

EVERET EVP220
20x FHD IP PTZ Video Camera
User Manual


Version V1.0
（English)

CONTENT

SAFETY GUIDES 2
PACKING LIST 3
QUICK START 3
1. Check all cable connections before power on. 3
2. Dial Switch Settings (at the bottom of the camera) 4
PRODUCT HIGHLIGHTS 5
TECHNICAL SPECIFICATIONS 6
CAMERA INTERFACE 8
CAMERA DIMENSIONS 8
IR REMOTE CONTROLLER 9
VISCA IN（RS232 PORT) 11
VISCA PROTOCOL 13
PART1 CAMERA RETURN COMMAND 13
PART2 CAMERA CONTROL COMMAND 13
PART3 CAMERA CONTROL COMMAND 18
VISCA PAN TILT ABSOLUTE POSITION VALUE 21
VISCA PAN TILT SPEED VALUE 21
PELCO-D PROTOCOL COMMAND LIST 22
PELCO-P PROTOCOL COMMAND LIST 23
OSD MENU 24
IP ADDRESS SETTING 26
WEB SETTINGS 27
USING VLC TO VIEW RTSP/RTMP VIDEO 32
VISCA OVER IP 32
HOW TO USE VISCA OVER IP 33

1 WWW.EVERETIMAGING.COM

SAFETY GUIDES
1.Before operation, please fully read and follow all instructions in the manual.
2.For your safety, always keep this manual with the camera.
3.The camera power input range is 100-240 VAC (50-60Hz), ensure the power supply input
within this rate before powering on.
4.The camera power voltage is 12VDC, rated currency is 2A. We suggest you use it with the
original power supply adapter supplied by the factory.
5.Please keep the power cable, video cable and control cable in a safe place. Protect all
cables especially the connectors.
6.Operational environment: 0℃-50℃, humidity less than 90%.To avoid any danger, do not
put anything inside the camera, and keep away from the corrosive liquid.
7.Avoid stress, vibration and damp during transportation, storage and installation.
8.Do not detatch the camera housing and cover. For any service, please contact authorized
Everet technicians.
9.Video cable and control cable should be individually shielded, and cannot be substituted
with other cables.
10.Do not direct the camera lens towards strong light, such as the sun or the intensive light.
11.Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent
when there is need to clean. To avoid damage on the camera lens, never use strong or
abrasive cleaning agents on the camera housing.
12. 
Do not move the camera by holding the camera head. To avoid mechanical trouble, do not
rotate the camera head by hand. NEVER MOVE THE CAMERA MANUALLY WHEN IT IS
WORKING.
13.Put the camera on fixed and smooth desk or platform,
avoid leaned installation.
14.Power Supply Polarity (Drawing)


Note:
The video quality may be affected by the specific frequencies of
electromagnetic fields.
Never grasp the head of the camera, and never move the camera by hand when it is working,
otherwise the camera will breakdown.
2 WWW.EVERETIMAGING.COM

PACKING LIST
Check all bellow items when open the package:

Camera
1
Power Adapter
1
Power Cable
1
RS232 Control Cable
1
USB 3.0 Cable
1
Remote Controller
1

QUICK START
1. Check all cable connections before power on.

3 WWW.EVERETIMAGING.COM

2. Dial Switch Settings (at the bottom of the camera)
Dial Switch（ARM）

SW-1
SW-2
Instruction
1
OFF
OFF
Updating mode
2
ON
OFF
Debugging mode
3
OFF
ON
Undefined
4
ON
ON
Working mode
Dial Switch

SW-3
SW-4
Instruction
1
OFF
OFF
reserve
2
ON
OFF
reserve
3
OFF
ON
reserve
4
ON
ON
reserve

Dial Switch (USB)

SW-5
SW-6
Instruction
1
OFF
OFF
Working mode
2
ON
OFF
Updating mode
4 WWW.EVERETIMAGING.COM

3
OFF
ON
Undefined
4
ON
ON
Undefined
PRODUCT HIGHLIGHTS
● Panasonic 1/2.8 inch 5MP sensor
●High end 12x optical zoom, 2x digital zoom lens with 72.5 degree field of view
●IP, HDMI, 3G-SDI, USB video outputs interface
●White Balance, Exposure, Focus, Iris can be adjusted automatically or manually
●Support POE: easy to use one RJ45 cable to get video, control and power supply
●Special Focusing Algorithm: fast and precise focusing performance when zooming or
moving
●Smooth PTZ mechanical design, accurate pan tilt motor control
●128 presets supported
●Standard Sony VISCA, VISCA over IP, PELCO-P, PELCO-D control protocol; IP VISCA
over both TCP and UDP
●Daisy chain supported, max 7 cameras connected in VISCA protocol
●Image flip function, support upside-down installation
●Supplied with functional IR remote controller
●Fast video format switch: less than 3 seconds
●Supported field upgrade for ISP, ARM, FPGA and USB
●USB3.0 port compatible with USB2.0 output.
●Support RS232/RS485/UVC control
●Standard UVC1.5 protocol, seamlessly compatible with major video conferencing
software and platform
●Support IR transfer function, code of the third party remote controller can be
transferred to the host via VISCA IN port, in case client’s development
●OSD menu in English, IP address, streaming resolution and size can be set in OSD
menu


5 WWW.EVERETIMAGING.COM

TECHNICAL SPECIFICATIONS
Video Format
HDMI
1920*1080P60/50/30/25
1920*1080I60/50
1280*720P60/50/30/25
SDI
1920*1080P60/50/30/25
1920*1080I60/50
1280*720P60/50/30/25
USB
1920*1080P60/50/30/25（USB3.0）
1280*720P60/50/30（USB3.0）
1280*720P25（USB3.0&USB2.0）
1024*576P30（USB3.0&USB2.0）
960*540P30（USB2.0）
640*360P30（USB2.0）
352*288P30（USB2.0）
IP
1920*1080@1~30 //1280*720@1~30（Main Stream）
1280*720@1~30 / 1027*576@1~30 / 640*360@1~30 （Sub
stream）
Video Interface
HDMI, 3G-SDI, RJ45, USB3.0
Sensor
1/2.8” 5MP Panasonic CMOS sensor
Zoom
F4.9～98mm (20X), F1.5 - 3.0, View Angle:60° (Far) - 3.2° (Near)
Rotation Angle
Pan: -170° ~ +170°; Tilt: -30° ~ +90°
Rotation Speed
Pan: 0°~120°/s ; Tilt: 0°~80°/s
Preset:
Remote controller: 10; RS232: 128; Accuracy: 0.1°
Control Port
RS232、RS485 (optional)、RJ45 (VISCA over IP)、USB3.0 (UVC1.5)
Network Speed
1000M
Video encode
H.264/H.265(default: H.264)
Bit Rate Control
Variable Bit Rate, Constant Bit Rate
Video Bit Rate
0Kbps~15360Kbps
IP Protocol
TCP/IP, HTTP, RTSP, DHCP , Onvif
POE
Supported
6 WWW.EVERETIMAGING.COM

Daisy Chain
Support RS232 serial daisy chain
Minimum Lux
0.1 lux
White Balance
Auto/Indoor/Outdoor/Manual/Auto/Sodium Lamp Auto/Sodium Lamp
Exposure
Auto/Manual/Bright/Shutter/Iris
Focus
Auto / Manual
Iris
Auto / Manual
Electric Shutter
Auto / Manual
Gamma
Supported
WDR
Supported
BLC
Supported
2D/ 3D Noise
Reduction
Supported
Anti Flicker
OFF/50Hz/60Hz
Pan Tilt Flip
Supported
Input Voltage
DC12V / POE
Dimension
220mm×190mm×173mm
Net Weight
1.4KG（3.1LBS）


 
7 WWW.EVERETIMAGING.COM

CAMERA INTERFACE

1.Camera Lens 
2.Camera Base
3.IR Receiver Panel
4.Power Indicator Light 
5.Dial Switch
6. Tripod Screw Hole
7. Installation Hole
8. RS232 control port (input)
9. RS232 control port(output)
10. HDMI port
11.3G-SDI port
12, USB port
13, RJ45 port
14. DC12V plug
CAMERA DIMENSIONS
8 WWW.EVERETIMAGING.COM

IR REMOTE CONTROLLER
POWER
Under normal working mode, short press
POWER key, to enter standby mode;
Press it again, the camera will do
self-configuration, then go back to HOME
position.
It will go to preset position if power on model
has been set before.

FREEZE （Not Supported in USB）
Short press FREEZE key to freeze/ unfreeze the
image.

IRT (IR Transfer/IR Pass)
Open / close the IR pass function. Once press
the IRT key, the camera will receive and
Pass the IR remote control signal to the
codec/terminal (via VISCA IN port).

SET 1~SET4 ADDRESS SETTING
Long press for 3 seconds until the key light ON,
to set camera address.

CAM1~CAM4（CAMERA SELECTING）
Short press to select the relative camera.

PRESET NUMBER KEY (1-9)
Set preset: long press (3 seconds) the number
key to set preset.
Run preset: Short press the number key to run
preset.
CLR PRE (CLEAR PRESET)
CLR PRE+ number key:
to clear the relative preset.
Long press to clear all presets.

9 WWW.EVERETIMAGING.COM

FOCUS KEY ( ON THE LEFT)
Manual focus, only valid under manual focus
model.
ZOOM KEY( ON THE RIGHT SIDE)
Set the zoom rate
NAVIGATE KEY: UP/DOWN/LEFT/RIGHT
Under working mode, use navigate key to set
the pan tilt, and select menu when enter OSD.
OK /HOME KEY
Under working mode, short press OK to make
the camera go back to HOME position; and
confirm the selection when enter OSD.

AF: Auto Focus
MF: Manual Focus
RESET: Press 3 seconds to reset camera
MENU: Enter OSD menu
LEARN+LIMIT L key:
Set the pan tilt left limit position.
LEARN+LIMIT R key:
Set the pan tilt right limit position.
LEARN+LMT CLR key:
Clear the limit position.


BLC OFF/ BLC ON: Not Available
BRIGHT-/BRIGHT+: Set image brightness, only
valid under bright priority exposure mode.




Video Format Keys:
Long press 3 seconds to select different video
format output.
 

















10 WWW.EVERETIMAGING.COM

VISCA IN（RS232 PORT)
VISCA IN & Mini DIN Connection
Camera VISCA IN
Mini DIN
1
DTR 
1
DSR
2
DSR 
2
DTR
3
TXD  
5
RXD
4
GND 
4
GND
5
RXD 
3
TXD
6
A(+) 
6
NC
7
IR OUT
7
NC
8
B(-) 
8
NC

No.
V_IN
V_OUT
1
DTR
DTR
2
DSR
DSR
3
TXD
TXD
4
GND
GND
5
RXD
RXD
6
A

7
IR OUT

8
B

VISCA IN
RS485
6
A (+)
7
IR OUT
8
B (-)
VISCA IN & DB9 Connection
Camera VISCA IN
Windows DB-9
1
DTR 
6
DSR
2
DSR 
4
DTR
3
TXD 
2
RXD
4
GND 
5
GND
5
RXD 
3
TXD
6
A(+) 


7
IR OUT


8
B(-) 


11 WWW.EVERETIMAGING.COM

VISCA NETWORK SETUP: 

SERIAL PORT CONFIGURATION:
Parameter
Value
Parameter
Value
Baud rate
2400/4800/9600/115
200
Stop Bit
1bit
Start Bit
1 bit
Check Bit
None
Date Bit
8 bit


12 WWW.EVERETIMAGING.COM

VISCA PROTOCOL
PART1 CAMERA RETURN COMMAND
Ack / Completion Message

Command
Packet
Note
ACK
z0 41 FF
Returned when the command is accepted.
Completion
z0 51 FF
Returned when the command has been executed.
z = camera address+8

Error Messages

Command
Packet
Note
Syntax Error
z0 60 02 FF
Returned when the command format is different or when a command with illegal
command parameters is accepted
Command Not
Executable
z0 61 41 FF
Returned when a command cannot be executed due to current conditions. For example,
when commands controlling the focus manually are received during auto focus.
PART2 CAMERA CONTROL COMMAND

Command type
Function
Command

AddressSet
Broadcast
88 30 01 FF
Address setting
IF_Clear
Broadcast
88 01 00 01 FF
I/F Clear
CommandCancel

8x 21 FF

CAM_Power
On
8x 01 04 00 02 FF
Power ON/OFF
Off
8x 01 04 00 03 FF
CAM_Zoom
Stop
8x 01 04 07 00 FF

Tele(Standard)
8x 01 04 07 02 FF
Wide(Standard)
8x 01 04 07 03 FF
Tele(Variable)
8x 01 04 07 2p FF
p = 0(low)~7(high)
Wide(Variable)
8x 01 04 07 3p FF
Direct
8x 01 04 47 0p 0q 0r 0s FF
pqrs: Zoom Position (0(wide)
~0x4000(tele))
Direct with speed
8x 0A 04 47 0t 0p 0q 0r 0s FF
t: spd 0~7
pqrs: Zoom Position (0(wide)
13 WWW.EVERETIMAGING.COM

~0x4000(tele))
CAM_DZoom
ON
8x 01 04 06 02 FF

OFF
8x 01 04 06 03 FF
Combine Mode
81 01 04 36 00 FF
Combine with optical zoom
control
Separate Mode
81 01 04 36 01 FF
Separate with optical zoom
control
Stop
81 01 04 06 00 FF
Enable In separate mode
Tele (Variable)
81 01 04 06 2p FF
Enable In separate mode
Wide (Variable)
81 01 04 06 3p FF
Enable In separate mode
Direct
81 01 04 46 0p 0q 0r 0s FF
Enable In separate mode

CAM_Focus
Stop
8x 01 04 08 00 FF

Far(Standard)
8x 01 04 08 02 FF
Near(Standard)
8x 01 04 08 03 FF
Far (Variable)
81 01 04 08 2p FF
p=0 (Low) to 7 (High)
Near (Variable)
81 01 04 08 3p FF
p=0 (Low) to 7 (High)
Direct
8x 01 04 48 0p 0q 0r 0s FF
pqrs: Focus Position
Auto Focus
81 01 04 38 02 FF

Manual Focus
81 01 04 38 03 FF

One Push AF
8x 01 04 18 01 FF

CAM_ZoomFocus
Direct
8x 01 04 47 0p 0q 0r 0s
0t 0u 0v 0w FF
pqrs: Zoom Position (0(wide)~
0x4000(tele))
tuvw: Focus Position
CAM_WB
Auto
8x 01 04 35 00 FF

Indoor
8x 01 04 35 01 FF

Outdoor
8x 01 04 35 02 FF

OnePush
8x 01 04 35 03 FF

ATW
8x 01 04 35 04 FF

Manual
8x 01 04 35 05 FF

Sodium lamp
8x 01 04 35 08 FF

fluorescent
8x 01 04 35 09 FF

14 WWW.EVERETIMAGING.COM

OnePush Trigger
8x 01 04 10 05 FF

CAM_RGain
Reset
8x 01 04 03 00 FF
Manual Control of R Gain
Up
8x 01 04 03 02 FF
Down
8x 01 04 03 03 FF
Direct
8x 01 04 43 00 00 0p 0q FF
pq: R Gain (0~0xFF)
CAM_Bgain
Reset
8x 01 04 04 00 FF
Manual Control of B Gain
Up
8x 01 04 04 02 FF
Down
8x 01 04 04 03 FF
Direct
8x 01 04 44 00 00 0p 0q FF
pq: B Gain (0-0xFF)
CAM_AE
Full Auto
81 01 04 39 00 FF
Automatic Exposure mode
Manual
81 01 04 39 03 FF
Manual Control mode
Shutter Priority
81 01 04 39 0A FF
Shutter Priority
Automatic Exposure mode
Iris Priority
81 01 04 39 0B FF
Iris Priority Automatic
Exposure mode
Bright
81 01 04 39 0D FF
Bright Mode (Manual control)
CAM_Shutter
Reset
8x 01 04 0A 00 FF
Shutter Setting
Up
8x 01 04 0A 02 FF
Down
8x 01 04 0A 03 FF
Direct
8x 01 04 4A 00 00 0p 0q FF
pq: Shutter Position (0~0x15)
CAM_Iris
Reset
8x 01 04 0B 00 FF
Iris Setting(0~0xD)
Up
8x 01 04 0B 02 FF
Down
8x 01 04 0B 03 FF
Direct
8x 01 04 4B 00 00 0p 0q FF
pq: Iris Position (0~ 0x11)
CAM_Gain
Reset
8x 01 04 0C 00 FF
Gain Setting (0~0x0F)
Up
8x 01 04 0C 02 FF
Down
8x 01 04 0C 03 FF
Direct
8x 01 04 0C 00 00 0p 0q FF
pq: Gain Positon (0~0x0E)
CAM_Bright
Reset
8x 01 04 0D 00 FF
Bright Setting
15 WWW.EVERETIMAGING.COM

Up
8x 01 04 0D 02 FF
Down
8x 01 04 0D 03 FF
Direct
8x 01 04 4D 00 00 0p 0q FF
pq: Bright l Positon (0~0x1B)
CAM_OverallBright
Direct
8x 01 04 A4 00 00 0p 0q FF
pq: Bright l Positon (0~0x0F)
different with AE BRIGHT
CAM_WDR
On
8x 01 04 3D 02 FF
Exposure Compensation ON/OFF
Off
8x 01 04 3D 03 FF
Direct
8x 01 04 D3 pq FF
pq: ExpComp Position (0~0x6)
CAM_BackLight(BLC)
On
8x 01 04 33 02 FF
BackLight On
Off
8x 01 04 33 03 FF
BackLight Off
CAM_Sharpness
Reset
8x 01 04 02 00 FF
Aperture Control
Up
8x 01 04 02 02 FF
Down
8x 01 04 02 03 FF
Direct
8x 01 04 42 00 00 0p 0q FF
pq: Aperture Gain (0~0x0F)
CAM_Memory(preset)
Reset
8x 01 04 3F 00 0p FF
p: Preset Number(=0 to 127)
Corresponds to 0 to 9 on the
Remote Commander
Set
8x 01 04 3F 01 0p FF
Recall
8x 01 04 3F 02 0p FF
CAM_LR_Reverse
On
8x 01 04 61 02 FF
Image Flip Horizontal ON/OFF
Off
8x 01 04 61 03 FF
CAM_PictureFlip
On
8x 01 04 66 02 FF
Image Flip Vertical ON/OFF
Off
8x 01 04 66 03 FF
CAM_RS485Ctl
On
8x 01 06 A5 02 FF

Off
8x 01 06 A5 03 FF
CAM_Saturation
Saturation
8x 01 04 A1 00 00 0p 0q FF
pq :saturation level 0x00~0xff
CAM_Contrast
Contrast
8x 01 04 A2 00 00 0p 0q FF
pq :Contrast level 0x00~0xff
CAM_SpeedByZoom
On
8x 01 06 A0 02 FF

Off
8x 01 06 A0 03 FF
CAM_PTSpeed
PT Speed
8x 01 04 C1 00 00 0p 0q FF
pq :PT speed 0x05~0x18
16 WWW.EVERETIMAGING.COM

CAM_ZoomSpeed
Zoom Speed
8x 01 04 D1 00 00 0p 0q FF
pq :Zoom speed 0x01~0x07
CAM_ZoomDisplay
On
8x 01 06 C2 02 FF

Off
8x 01 06 C2 03 FF

CAM_IRaddress
IR address
8x 01 06 D8 0p FF
p:IR address 1~4
CAM_Gamma
Gamma set
81 01 04 5B 0p FF
P:Gamma NO. (0~6)
CAM_MountMode
UP
8x 01 04 A4 02 FF
Mount Up
Down
8x 01 04 A4 03 FF
Mount Down
CAM_ColorGain
Direct
8x 01 04 49 00 00 00 0p FF
(0~0x0E)
CAM_2D
Noise Reduction
Direct
8x 01 04 A5 0p FF
0 – OFF
1 – ON
CAM_3D
Noise Reduction
Direct
8x 01 04 53 0p FF
0 – OFF
1 – AUTO
2-5：level
FLICK
50HZ
81 01 04 AA 01 FF

60HZ
81 01 04 AA 02 FF

OFF
81 01 04 AA 00 FF

VideoSystem Set

8x 01 06 35 00 pp FF
pp: Video format
1080P60 0x2E
1080P50 0x2F
1080I60 0x01
1080I50 0x04
1080P30 0x06
1080P25 0x08
720P60 0x09
720P50 0x0C
720P30 0x0E
720P25 0x11
CAM_IDWrite

8x 01 04 22 0p 0q 0r 0s FF
pqrs: Camera ID (=0000 to FFFF)
IP address control
IP set
8x 01 04 AB 0p 0q 0r 0s 0m 0n 0x 0y FF
Set ip to :pq.rs.mn.xy
Mask set
8x 01 04 AC 0p 0q 0r 0s 0m 0n 0x 0y FF
Set mask to :pq.rs.mn.xy
Gateway set
8x 01 04 AD 0p 0q 0r 0s 0m 0n 0x 0y FF
Set gateway to : pq.rs.mn.xy
SYS_Menu
Menu On
8x 01 06 06 02 FF
Turn on the menu
Menu Off
8x 01 06 06 03 FF
Turn off the menu
Menu Back
8x 01 06 06 10 FF
Menu step back
Menu Ok
8x 01 7E 01 02 00 01 FF
Menu ok
17 WWW.EVERETIMAGING.COM

IR_Receive
On
8x 01 06 08 02 FF
IR(remote commander)receive
ON/OFF
Off
8x 01 06 08 03 FF
On/Off
8x 01 06 08 10 FF
Pan_tilt Drive
Up
8x 01 06 01 VV WW 03 01 FF
VV: Pan speed 0x01 (low speed) to
0x18 (high speed)
WW: Tilt speed 0x01 (low speed) to
0x14 (high speed)
YYYY: Pan Position(TBD)
ZZZZ: Tilt Position(TBD)
Down
8x 01 06 01 VV WW 03 02 FF
Left
8x 01 06 01 VV WW 01 03 FF
Right
8x 01 06 01 VV WW 02 03 FF
Upleft
8x 01 06 01 VV WW 01 01 FF
Upright
8x 01 06 01 VV WW 02 01 FF
DownLeft
8x 01 06 01 VV WW 01 02 FF
DownRight
8x 01 06 01 VV WW 02 02 FF
Stop
8x 01 06 01 VV WW 03 03 FF
AbsolutePosition
8x 01 06 02 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
RelativePosition
8x 01 06 03 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
Home
8x 01 06 04 FF
Reset
8x 01 06 05 FF
Pan-tiltLimitSet
Set
8x 01 06 07 00 0W
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
W:1 UpRight 0:DownLeft
YYYY: Pan Limit Position(TBD)
ZZZZ: Tilt Limit Position(TBD)
Clear
8x 01 06 07 01 0W
07 0F 0F 0F 07 0F 0F 0F FF

PART3 CAMERA CONTROL COMMAND
Command type
Command
Return
Note
CAM_PowerInq
8x 09 04 00 FF
y0 50 02 FF
On
y0 50 03 FF
Off(Standby)
CAM_ZoomPosInq
8x 09 04 47 FF
y0 50 0p 0q 0r 0s FF
pqrs: Zoom Position
CAM_FocusModeInq
8x 09 04 38 FF
y0 50 02 FF
Auto Focus
y0 50 03 FF
Manual Focus
CAM_FocusPosInq
8x 09 04 48 FF
y0 50 0p 0q 0r 0s FF
pqrs: Focus Position
18 WWW.EVERETIMAGING.COM

CAM_WBModeInq
8x 09 04 35 FF
y0 50 00 FF
Auto
y0 50 01 FF
Indoor mode
y0 50 02 FF
Outdoor mode
y0 50 03 FF
OnePush mode
y0 50 04 FF
ATW
y0 50 05 FF
Manual
CAM_RGainInq
8x 09 04 43 FF
y0 50 00 00 0p 0q FF
pq: R Gain
CAM_BGainInq
8x 09 04 44 FF
y0 50 00 00 0p 0q FF
pq: B Gain
CAM_AEModeInq
8x 09 04 39 FF
y0 50 00 FF
Full Auto
y0 50 03 FF
Manual
y0 50 0A FF
Shutter priority
y0 50 0B FF
Iris priority
y0 50 0D FF
Bright
CAM_ShutterPosInq
8x 09 04 4A FF
y0 50 00 00 0p 0q FF
pq: Shutter Position
CAM_IrisPosInq
8x 09 04 4B FF
y0 50 00 00 0p 0q FF
pq: Iris Position
CAM_GainPosiInq
8x 09 04 4C FF
y0 50 00 00 0p 0q FF
pq: Gain Position
CAM_ BrightPosiInq
8x 09 04 4D FF
y0 50 00 00 0p 0q FF
pq: Bright Position
CAM_ OverallBrightPosiInq
8x 09 04 A4 FF
y0 50 00 00 0p 0q FF
pq: Bright Position
CAM_ExpCompModeInq
8x 09 04 3E FF
y0 50 02 FF
On
y0 50 03 FF
Off
CAM_ExpCompPosInq
8x 09 04 4E FF
y0 50 00 00 0p 0q FF
pq: ExpComp Position
CAM_ApertureInq
8x 09 04 42 FF
y0 50 00 00 0p 0q FF
pq: Aperture Gain
CAM_MemoryInq
8x 09 04 3F FF
y0 50 pp FF
pp: Memory number last operated.
SYS_MenuModeInq
8x 09 06 06 FF
y0 50 02 FF
On


y0 50 03 FF
Off
CAM_LR_ReverseInq
8x 09 04 61 FF
y0 50 02 FF
On


y0 50 03 FF
Off
CAM_PictureFlipInq
8x 09 04 66 FF
y0 50 02 FF
On


y0 50 03 FF
Off
CAM_IDInq
8x 09 04 22 FF
y0 50 0p 0q 0r 0s FF
pqrs: Camera ID
CAM_DHCPInq
8x 09 04 AE FF
y0 50 pp FF

CAM_IPInq
8x 09 04 AB FF
y0 50 0p 0p 0q 0q 0r 0r 0s 0s FF

19 WWW.EVERETIMAGING.COM