Everlea VT 9000 User manual

VT 9000 Wireless DECT
headset
Connecting two Wireless DECT headset
Delmar Marina
Version 1.0 Released

VT 9000 Wireless DECT headset
Connecting
two VT 9000
Everlea Group Limited | © All Rights Reserved 2016
Page
2
Version
1.0 Released
EVL
VT9000
CON
2HS
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by
any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission
of Everlea Group Limited.
This document is the property of Everlea Group Limited, and may not be disclosed to any third party without
the consent of Everlea Group Limited.
Table of Contents
Document Revision History ..................................................................................................................................... 2
Reference Documents ............................................................................................................................................. 2
Introduction ............................................................................................................................................................. 3
Pre Requisites .......................................................................................................................................................... 3
Connecting Procedure ............................................................................................................................................. 3
Document Revision History
Edition
Date
Comment
Author(s)
0.1
10/01/2017
Initial version created.
Delmar Marina
1.0 11/01/2017
New revision finalised and released as Release
1.0 Delmar Marina
Reference Documents
S/No
Document
Number Document Title
Document
Date Author(s)
1
N/A
VT
9000
DECT User Manual
N/A
N/A

VT 9000 Wireless DECT headset
Connecting
two VT 9000
Everlea Group Limited | © All Rights Reserved 2016
Page
3
Version
1.0 Released
EVL
VT9000
CON
2HS
Introduction
This document describes the procedures on how to connect two VT 9000 Wireless DECT headset with a desk
phone.
Pre-Re uisites
This procedure can be initiated with one desk phone (without a lifter and headset port) connected to a phone
line and with the complete package of two VT 9000.
Procedure
1. On the desk phone, unplug the handset cable from the phone body and connect the handset cable to the
port marked on the first base.
2. Plug the supplied telephone cable from port marked on the first base, and then plug the other end of
the cable to port marked on the second base.
3. On the second base, please connect the supplied telephone cable from port marked and connect the
other end of the telephone cable into the handset port on the desk phone.
Please see image below of the setup.