Evervue OCEA Style Series User manual

1
Information is subject to change without prior notification.
© Copyright. Evervue USA Inc.
www.evervue.com
Enter the sequence 2-5-8-8 on the remote to access the “Design setting”.
Step 3
Access the input source menu, located in the upper right portion of your screen, and highlight HDMI1
option. Please do not press select.
Step 2
In the event that the HDMI1 button is inadver-
tently pressed, kindly press the “Exit” button
and repeat step 2.
Step 1 Locate and press the “Source” button on the remote.
Accessing Power On/Off Settings for 4K in Ocea
Style 28”/ 32”/ 43”/ 55”: User’s Guide V.3.3
Press
2-5-8-8

2
Information is subject to change without prior notification.
© Copyright. Evervue USA Inc.
www.evervue.com
Step 6
Select “Power” within the “USER SET” menu and use the right arrow button on the remote control to
switch the mode to “off”.
Press the right arrow button twice or until the power settings (located at the bottom of the
screen) switch to “off”.
Step 5
Step 4 Navigate to “USER SET” menu within the “Design Setting” and select it by pressing “OK”.
Accessing Power On/Off Settings for 4K in Ocea
Style 28”/ 32”/ 43”/ 55”: User’s Guide V.3.3