Fargo FP3320BG User manual

Fargo
®
Set-Up and Maintenance Instructions Sheet
Figure 1
1. Carefully remove from
package.
Figure 2
ELECTRICAL REQUIREMENTS
Table fan requires a grounded electrical supply line of
120 volts AC, 60 Hz, 15 amp circuit. 8 ft power cord
included. NOT for Damp Location Use.
Set Up:
2. Plug directly into the
socket.
Figure 3
3. Select the desired airflow,
located on back of fan base by
rotating switch clockwise
Maintenance — To Clean Your Fan:
Periodic cleaning of your new fan is the only maintenance
that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the �nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to �nish.
CAUTION
Do not use water when cleaning your fan. It could
damage the motor or the finish and create the possibility
of electrical shock.
▲ WARNING
To Avoid Fire Or Electrical Shock, Do NOT Use This Fan
With Any Solid-State Speed Control Device And Do NOT
Use By Open Window.

10983 Bennett Parkway
Zionsville, IN 46077
[phone]
FAX [phone]
Outside U.S. call [phone]
Visit Our Website www.fanimation.comCopyright 2006 Fanimation 2006/12
Figure 1
1. Carefully remove screws
and top of cage.
Figure 2
2. Carefully remove nut and
blade. After cleaning and re-
installing the blade, carefully
install the nut, do NOT
overtighten.
Figure 3
3. Assemble the top cage with
the screws, do not overtighten.
Maintenance (cont’d) — To Clean Your Fan Blade:
Before discarding packaging materials, be certain all parts have been removed
How To Order Parts
When ordering repair parts, always
give the following information:
• Part Number
• Part Description
• Fan Model Number
Contact your retail store for repair parts.
Service Parts:
3
1
2
Fargo®Fan – Model #FP3320** (BG, BL, CL, CR, OB, or SN codes)
Ref # Description Part #
1 Cage Set Assembly w/Screws AP33211SER**
**51233PAedalB2
**02233PeldnaH3
** Insert Finish Codes (for service parts)
AB Antique Brass – Cage Set Assembly, Handle
BB Brushed Brass – Cage Set Assembly, Handle
BL Black – Cage Set Assembly, Handle
CH Chrome – Cage Set Assembly, Handle
OB Oil-Rubbed Bronze – Blade
SN Satin Nickel – Blade