Fender Nashville Power User manual

uF 0.022 2
3
1
B
3
B
2
A
A
B
1
A
OF OUTPUT JACK ASS'Y
POWERCHIP ASS'Y TO TERMINAL #8
SOLDER WHITE WIRE FROM
JACK ASS'Y L=.300 TO AVOID SHORT
ASS'Y TO TERMINAL #2 OF OUTPUT
SOLDER SHIELD FROM POWERCHIP
JACK ASS'Y
ASS'Y TO TERMINAL #4 OF OUTPUT
SOLDER RED WIRE FROM POWERCHIP
#1 OF OUTPUT JACK ASS'Y
BATTERY SNAP TO TERMINAL
SOLDER BLACK WIRE FROM
TO BACK OF CONTROL POT
BLACK WIRE FROM BRIDGE PICKUP
RED FROM MIDDLE PICKUP
SOLDER BLACK WIRE FROM NECK PICKUP
TO GROUND PAD ON POWERCHIP
INSULATOR ON LEAD WIRE AND SOLDER
STRIP PIEZO SHIELD TO ALLOW 1/4" OF
CABLE TO PIEZO IN ON POWERCHIP
SOLDER BLACK LEAD WIRE FROM PIEZO
SOLDER TO POWERCHIP
LENGHT OF PIEZO CABLE BEFORE
INSTALL SHRINK TUBING OVER ENTIRE
SEE DETAIL " A "
A
13
19
BATTERY SNAP
5 WAY SWITCH
NECK PICKUP TO
WHITE WIRE FROM
5 WAY SWITCH
5 WAY SWITCH
NASHVILLE POWER TELECASTER 0135000/5002
N.T.S.
BRIDGE SECTION
SECTION (6)
FOR EACH BRIDGE
ACOUSTIC PICKUP
OUTPUT JACK
15
RED WIRE FROM
BATTERY SNAP
3
2
4
5
6
1
8
7
BOTTOM VIEW : N.T.S.
TERMINAL DETAIL
MIDDLE PICKUP TO
YELLOW WIRE FROM
BRIDGE PICKUP TO
WHITE WIRE FROM
07-12-2000
23
Pg. 2 of 5
BRIDGE ASSEMBLY
CONTROL ASSEMBLY

SCALE: N.T.S.
SCALE: N.T.S.
TOP VIEW
BOTTOM VIEW
JUMPER IN THIS
POSITION
RED WIRE FROM
BATTERY-SNAP
RED WIRE FROM
TWO CONDUCTOR
SHIELDED CABLE
TURN TRIM-POT FOR PIEZO
VOL FULL CLOCKWISE
SHIELD FROM TWO
CONDUCTOR CABLE
MAG-INPUT PAD
WHITE WIRE FROM
TWO CONDUCTOR
SHIELDED CABLE
NASHVILLE POWER TELECASTER 0135000/5002
FISHMAN PREAMP POWERCHIP (WIRING DETAIL)
07-12-2000
Pg. 3 of 5