Festival Depot PF19223 User manual

ASSEMBLY INSTRUCTIONS
STEP 2
STEP 3
B
E
F
G
H
Part# Reference Image QTY
M6*20
A
C
D
1
4
1
1
16
1
6
1
Place table top frame (A) on the ground, then screw table legs (B) to it.
Please do not tight any screws to the end at this step.
Screw table leg support ring (C) to table legs.
Make sure all screws are inserted properly
and tighten all screws to the end.
Place table top tiles (E) and umbrella hole board (F) on the table frame properly.
Place umbrella hole lid (D) properly.
Finish and enjoy your table.
STEP 1
B
A
GG
G G
C
D
FE
ASSEMBLY TIPS: Please use the hardware and accessories included in the
set. DO NOT use other electrical or manual tools.
In order to facilitate the assembly and make your final product firm and
stable, please tighten by a few rounds each screw one by one. After all
screws are connected, then you start to tighten each screw to the end.
DO NOT tighten any screw to the end before you’ve connected all screws.
The assembly requires minimal level of DIY skills if you follow the
instructions carefully. In case you encounter any difficulty or have any
questions, feel free to contact the store or manufacturer.