Living Spaces 305-P236153 User manual

1Headboard Panel 1
AJCBC Bolt 8
B
Flat Washer 8
C
DAllen Key
Footboard Panel
1
1
8
2
3
4
5Side Rails
Slats
2
1 Rolls
4
Support Legs
Spring Washer
EP/H Rattan Screw
M8 x 25MM
M8
M8
M5 x 65MM
8 x 1 1/4" 26
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS HEAD SCREWDRIVER
ITEM 305-P236153 / 305-P236154
TWIN STORAGE FOOTBOARD & SLAT ROLL/TWIN/FULL
STORAGE SIDE RAILS
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small hardware which may have come loose inside the carton during shipment. Identify and count all
hardware and compare with the hardware list below.
When placing furniture on non-carpeted flooring, HMI recommends the use of floor protection such
as an area rug or furniture pads. Area rugs and padding not included with purchase.
PARTS LIST
No. Description Quantity
Sketch
HARDWARE LIST
No. Description Sketch Quantity
Size
Page 1 of 3
Made In Malaysia Residential Use Only

ASSEMBLY INSTRUCTIONS
COMPLETED ASSEMBLY
Detail-A
STEP 1
Hang Side Rails as shown.
Page 2 of 3
Made In Malaysia
B
A
C
D
Residential Use Only
1
5
2
Firmly grab the drawer on each sides and slide out until it stops.
Proceed to pull outward until the drawer track slips past the
Stop. Hang the Side Rail (6) as shown.
After install the side rail (6). Align the drawer with the opening
while making sure that the drawer track guide is line up with the
stop and metal track. Press the drawer inward. Continue to press
the drawer inward until it moves past the stop. You should feel
the drawer slide smoothly on the track until it gets to the end
Marking
Detail-A
5
REMOVE THE DRAWER TO ASSEMBLE:
INSERT THE DRAWER:

ASSEMBLY INSTRUCTIONS
Level Me on
Uneven Floor
Page 3 of 3
Made In Malaysia
STEP 2
Fasten Support legs to the Slat.
4
3
4
3
4
STEP 3
Fix Slats as shown.
3E
5
Residential Use Only