Firefield BattleTek Series User manual

BATTLETEK SERIES
FF25019, FF25020
USER MANUAL

Fireeld’s BattleTek Subcompact is a convenient and powerful 5mW laser sight that delivers
quick-target acquisition for short- and medium-range engagements, such as tactical engagements
or self-defense. It boasts an impressive nighttime and daytime visibility, plus an internal,
rechargeable battery. Highly durable, the BattleTek Subcompact boasts a maximum caliber recoil
of .45 ACP, it is IP55 water-resistant, and shockproof.
VICTORY JUSTIFIES EVERYTHING®
www.re-eld.com
The Fireeld™ brand has recently launched with products designed to maximize every intense
moment. Originally designed for consumers who need products to hold up to heart pounding,
fast- paced combat in the eld with Xtreme shooting sports, Fireeld™ has crossed over to
service customers with hunting and tactical needs as well.
Fireeld™ offers quality products with the outdoor enthusiast and shooting fanatic in mind
that are affordable to the masses. Prepare for victory with the latest Fireeld™ products!
The Fireeld™ brand consists of riescopes, laser sights, boresights, tactical ashlights, reex
sights, AK and Quad Rail mounts, binoculars and other shooting accessories. Fireeld™
products are compatible with paintball, airsoft, AR15, shotguns and pistols.
Fireeld™ concentrates on providing the consumer with products for fast-paced situations
while being durable, yet affordable. Fireeld™ works diligently creating products to serve the
next generation of fast- paced gun enthusiasts. Transform fears into glory and excitement with
Fireeld™!
*www.re-eld.com*
© Sellmark Corporation, all rights reserved
BattleTek Series

1. Laser apertures
2. Elevation/Windage adjustments
3. USB-C port
4. Push buttons
5. Firearm mount
6. Mounting bolt
DIAGRAM
1 2
TECHNICAL SPECIFICATIONS FF25019 FF25020
Laser wavelength (nm) 650 520 - 532
Laser power output (mW) ≤ 5 < 5
Dot size (in @ 50yd) 2 2
Laser type Red, Class lllA Green, Class IIIA
Battery life (hours) Continuous - 2 Hours
Pulse - 6 Hours
Continuous - 40 minutes
Pulse - 2 Hours
Battery type Internal rechargeable Internal rechargeable
Maximum caliber .45 ACP .45 ACP
Dimensions (in/mm) 1.85/1.06/1.07
47x26.9x27.2
1.85/1.06/1.07
47x26.9x27.2
Weight (.oz) 0.92 0.85
SPECIFICATIONS
5
2
1
3
4
• Internal rechargeable battery
• Compact and lightweight
• Ambidextrous digital switch
• 5mW green laser
• Windage and elevation adjustable
• Quick target acquisition
• 600 yards visibility at night
• Up to 50 yards visibility in daylight
FEATURES
• Internal rechargeable battery
• Compact and lightweight
• Ambidextrous digital switch
• 5mW red laser
• Windage and elevation adjustable
• Quick target acquisition
• 300 yards visibility at night
• Up to 30 yards visibility in daylight
FF25019 FF25020
6

3
CHARGING THE BATTERY
MOUNTING
OPERATING THE LASER / LIGHT
The BattleTek subcompact lasers are powered by an internal
rechargeable battery. Under the rubber USB-C cover are
LED’s that indicate charge level. Once the LED is to level 1, or
the laser is dim or does not activate, the battery needs to be
charged. To charge the battery:
1. Uncover the battery cover over the USB-C port (3).
2. Insert a USB Type C cable into the port.
3. Charge the device until all LED indicator lights are on.
To mount BattleTek subcompact, please read and strictly adhere to the following directions:
1. First unload the weapon. Remove the bolt/ring pin to ensure the weapon is incapable of
ring.
In order to activate BattleTek lasers locate the push button (4).
1. Push the button down.
2. A click should be heard, and the laser/ light will activate.
3. Repeat step 1. Once the click is heard the laser/light will deactivate.
To activate strobe mode press and hold the button until strobe mode activates
4
2. The BattleTek lasers and lights are tted with a rearm mount (5).
3. Tighten the mounting bolt (6). Do not over tighten.
ZEROING THE LASER
Zeroing and test ring should be performed safely on a ring range. Laser boresights are a
quick and accurate method to sighting in all weapon sights. If the rearm’s optical sight is already
zeroed, the laser can be zeroed by aligning the laser dot to the crosshair’s center. Adjustments
to the laser dot are made by operating the windage and elevation adjustments.
OPERATING WINDAGE AND
ELEVATION ADJUSTMENTS
In order to make windage and elevation adjustments:
1. Locate the windage and elevation adjustments (2).
2. Rotate the windage and elevation adjustments to move the alignment of the laser dot using
the provided hex key.
MAINTENANCE
Proper maintenance of the Fireeld BattleTek lasers and lights is recommended to ensure
longevity. It is recommended to remove the battery to ensure the laser will not activate during
maintenance procedures. When the sight becomes dirty it should be wiped down with a dry
or slightly damp cloth. To clean off dirt, debris, or oils from the laser’s aperture, rst make sure
the laser is deactivated. Apply denatured alcohol to the cotton swab rst and using small

5
WARNING
6
Before handling the laser sight, read and understand the contents of your rearm’s
manual, and the Fireeld BattleTek Flashlight with green and IR laser manual. Follow all
standard safety precautions and procedures during rearm operation, even when the
laser sight is not in use.
• NEVER point the laser sight directly at, or into, an eye. This may cause damage to the
eye, or blindness.
• Avoid looking directly into the laser.
• Avoid shining the laser into mirrors or other reective surfaces.
• ALWAYS check the chamber of your weapon is clear before mounting or dismount-
ing the laser sight.
• The laser sight should be tested during periods of non-use to make sure it is still
operating properly.
FAILURE to follow standard rearm safety precautions and procedures, as well as the
above warnings, is dangerous and may result in serious injury, damage to property, or
death.
CAUTION-USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF PRO-
CEDURES OTHER THAN THOSE SPECIFIEID HEREIN MAY RESULTS IN HAZARD-
OUS RADIATION EXPOSURE.
circular motions clean the laser’s lens with the cotton swab. Allow the alcohol to evaporate.
Afterwards, use your breath to fog the lens. Immediately afterwards use a new cotton swab to
clean the lens again to remove any residue. No further maintenance is required.
TROUBLESHOOTING
Proper authorization is required before shipping any product back to Fireeld. Failure to obtain
authorization could result in your product being returned to the wrong address, lost, or damaged.
Fireeld is not liable for products returned without authorization.
1. The unit does not turn on - Check the battery charge level and follow the manual’s
instruction for charging the battery.
2. The unit is not holding zero - Verify the laser sight is mounted securely to the pistol. If
there is any shifting, retighten the mounting system according to the mounting instructions,
but do not over tighten.
3. The laser dot is blurry – Blow off any dust or debris from the lens on the laser aperture.
Next, clean any oils on the lens of the laser aperture with a small cotton swab and
denatured alcohol. See maintenance section in this manual.
FIREFIELD WARRANTY
Please visit www.re-eld.com for warranty details and information
DANGER
Laser Radiation
Avoid direct
eye exposure
Class IIIa Laser Product

7 8
NOTES

www.re-eld.com