Firgelli FA-EWM-17 User manual

1
MOUNTING INSTRUCTIONS
55lbs max.
14" - 37" max.
Electric Specification
● Input voltage: AC 110-260
● Input current: 0.3A
● Input frequency: 50-60Hz
● Output voltage: DC 12
● Output current: Max. 1A
Motor
Item oltage Current
(No Load)
Current
(Rated load)
Operating
Temperature
Motor DC 12 ≤0.3A ≤0.6A -20°C ~ 50°C

2
◆ Parts Included
A B x2
◆Tools Required (Not Included)

3
◆Installation

4
With the help of an assistant, and
using the level to ensure the wall plate
is level, position the wall plate against
the wall in the desired mounting
location.
With the help of an assistant, and
using the level to ensure the wall plate
is level, position the wall plate against
the wall in the desired mounting
location.

5
Hook the T Brackets (with T set) to the bars of Part A.
The lock designed feature can prevent your television from being removed from the crossbar. First, put the
security lock in place, then tighten the bolt with screw driver by turning clockwise until tight (See illustration).

6
Plug the mount power cord into power outlet. Attach IR Receiver to T : Using the provided elcro tab, adhere the
IR receiver eye-piece to the T front panel so it has a clear line of sight with the remote control. (Fig. 6)
◆ Function and Operation
This mount has function of tilt and swivel. It can be adjusted by remote control to get optimal viewing by
pitching up 15 or pitching down 15°, and turning left 15° or turning right 15°,up/down by approx 2 degrees.
Up/down by approx 2 degrees

7
◆Left / right and preference
Note: The factory settings are made for the maximum left and right stop positions (±15°) and for the preference
position: screen parallel to the fixation wall (in the fixation enter). You may adjust other stop (left, right) positions
another preference position to restrict the movement of the screen during rotation, to prevent collision with objects
around it and provide for optimum visual comfort. The remote control has a range of 10m.
In case you do not find the remote control or loss it, you can adjust the left/right position by pressing the button
on the received directly. Please see the picture.

8
◆Left / right and preference
● plug in the mount power supply cable. The buzzer will make a buzzing sound. Inform the whole machine is
under working.
● The T -set will turn to the preference position (0°) automatically when press the Display Center arrows (
/ ). The buzzer will make a buzzing sound.
● Press the Display Left arrows ( ) until the desired position has been reached. It will stop when turn to
15° with the buzzer’s suggestive sound. If you keep pressing the left, the buzzer will keep buzzing, but the machine will
not move.
● Press the Display Right arrows ( ) until the desired position has been reached. It will stop when turn to
15° with the buzzer’s suggestive sound. If you keep pressing the left, the buzzer will keep buzzing, but the machine will
not move.
● Protection: Please make sure the machine is not over loaded to avoid the unnecessary product damage or the
person harm.
◆ Maintenance
● Do not use corrosive agent of alcohol or chemical cloth to clean the product!
● Temperature and humility condition: -20°c ~ +50°c.
◆ Tips
● Contact between display and wall can cause damage to equipment. Allow some clearance between display and
wall when setting display travel limit.
● Before turning on the power, make sure all the screws are fixed bracket and T screen have been installed
correctly according the user’s manual.
● Do not disassemble the product to repair by yourself, warranty for electricity is void after disassembling!
● After you installed the apparatus, please check the expansion screws and all fastening devices every 3 months.
● PINCH HAZARD! FINGERS OR HANDS BETWEEN MO ING PARTS CAN LEAD TO SE ERE PERSONAL INJURY!
● Keep fingers and hands away from mount lift arms when operating.