Fisher & Paykel OM60NDB1 Instruction sheet

First Use
First Use
• The oven should be thoroughly cleaned with soap and water and carefully rinsed.
• It is important that you condition the oven before using it for cooking and baking. Conditioning will burn off any
manufacturing residue and ensure you get the best results from the start. There will be a distinctive smell and a
small amount of smoke during conditioning. This is normal, but make sure the kitchen is well ventilated.
• Heat the oven for 30 minutes at the maximum temperature. Use the microwave and true convection function
without accessories in the oven. Before using the accessories for the first time, clean them carefully with hot
water, dishwashing liquid and a soft cloth.
Assembling & Disassembling the Flat Grill
To remove the flat grill, pull it towards you until it stops
and then lift, by pulling upwards, until it comes
completely out. To put the flat grill back in, insert it at a
45° angle and then position it horizontally and push it all
the way in to the end of the grill track.
Grill and baking pan assembly
https://producthelp.fisherpaykel.com/nz/Cook/Microwave_Ovens/OM60NDB1/User_Guide_OM60NDB1/03_First_Use
Updated: Mon, 10 Apr 2023 05:57:43 GMT
Powered by
1

Grill oven rack Glass turntable
If the flat grill has a drip tray, to remove it, lift it slightly and pull it towards you.
Keypad
To operate the keypad, press gently. The keypad will not work if more than one key is pressed at the same time.
Movement arrows
https://producthelp.fisherpaykel.com/nz/Cook/Microwave_Ovens/OM60NDB1/User_Guide_OM60NDB1/03_First_Use
Updated: Mon, 10 Apr 2023 05:57:43 GMT
Powered by
2

XCancel and return to previous display page. Keep pressed to return to Home screen.
Switches the oven on and off
Confirms the settings and starts cooking operations. When pressed during a cooking
operation, the function is placed in pause. Press again to restart.
To set the timer. Enter the functions menu during cooking.
Switches the inner oven light on and off.
Error Codes
Error codes appear when a fault has been detected. When the error appears, the current function is blocked. If the type
of error is related to a safety function, the oven becomes unusable and you will need to contact Customer Care. If the
error relates to a minor fault, after being restarted the oven can be used for the functions that do not involve the faulty
part (eg a heating element).
Beeps
• Confirm that the command has been received after a key has been pressed.
• It also indicates that a time function has been completed (eg Timer or Automatic Cooking). y When using the
recipe function a beep will indicate that the oven is waiting for operation by the user (eg insert a dish).
• Beeps will also signal that there is an oven fault.
Default Temperature
The cooking modes automatically select a suitable temperature when the cooking mode is selected, the temperature
can be modified at any time.
https://producthelp.fisherpaykel.com/nz/Cook/Microwave_Ovens/OM60NDB1/User_Guide_OM60NDB1/03_First_Use
Updated: Mon, 10 Apr 2023 05:57:43 GMT
Powered by
3

F Failure Number Codes
Failure codes appear when the error code is recorded in the Error Log in the Setup menu. This error can be
communicated to the service technician so they can understand the possible cause of the problem in advance.
Timer
The timer on your oven does not turn the appliance on or off. If you want to turn the oven off
automatically, please refer to the automatic cooking section in use the end-of-cooking or delayed
cooking function.
Pressing the
button does not reset or stop the timer.
1. Press
and set the desired time using the arrows
and confirm by pressing
.
To switch the selection between hours and minutes press the arrows
.
2. The timer can be set from 1 minute to 12 hours and 59 minutes.
When set, the remaining time is always visible in the status bar until the time expires or is reset.
3. To change or cancel the time set, you must reset the timer by pressing and holding
for a few seconds.
4. The timer format is usually HR:MIN, and switches to MIN:SEC during the last minute.
https://producthelp.fisherpaykel.com/nz/Cook/Microwave_Ovens/OM60NDB1/User_Guide_OM60NDB1/03_First_Use
Updated: Mon, 10 Apr 2023 05:57:43 GMT
Powered by
4

5. When the time expires, the display shows 00:00 and an alert will sound for one minute or until
is pressed.
Preheat
When preheating, the current temperature is displayed together with the thermometer icon
.
When the set temperature is reached, the control sounds an ‘end of preheat’ beep and the current temperature value
disappears from the display.
High Altitude Baking
When cooking at high altitude, recipes and cooking time will vary from the standard.
Dishware
• Use microwave safe dishware.
• When using the oven in microwave mode, the dish must be placed on the rotating plate.
• When using the oven in combination mode, it is preferable to place the dish to be cooked on the round grill,
supported so that it is centered on the rotating plate.
Unsuitable Dishware
The flat grill must be removed when using the microwave and combined modes. Use it only with
traditional oven functions.
https://producthelp.fisherpaykel.com/nz/Cook/Microwave_Ovens/OM60NDB1/User_Guide_OM60NDB1/03_First_Use
Updated: Mon, 10 Apr 2023 05:57:43 GMT
Powered by
5

Testing Dishware
Never turn on the microwave oven before you have put in the food. The only exception allowed is testing dishware.
First Use & User Settings
When using your oven for the first time, you will be prompted to enter user settings for:
• Time
• Date
• Language
• Temperature and weight measurements
At the first connection and subsequent re-connections to the power supply, the door lock mechanism
performs a calibration cycle in this phase, always keep the door closed.
These settings can be modified at anytime by accessing the settings menu
https://producthelp.fisherpaykel.com/nz/Cook/Microwave_Ovens/OM60NDB1/User_Guide_OM60NDB1/03_First_Use
Updated: Mon, 10 Apr 2023 05:57:43 GMT
Powered by
6