FIT AND FUN PLAYSCAPES BUDDY CIRCLE User guide
© 2017 FIT AND FUN PLAYSCAPES, LLC 1 of 2
APPLICATION INSTRUCTIONS
FOR THE
BUDDY CIRCLE
Product Number: 17-2W-060
SIZE: diameter approximately 7 feet.
ESTIMATED PAINT TIME:1-4 people for 1-4 hours.
READ FIRST: Completely read “General Instructions”.
Prepare surfaces as recommended before painting.
1. Place STENCIL A in desired position as shown below left. Using thin sized brushes, paint
stencil, using small amounts of paint on brush for each coat.Repeat 1-2 more times to
achieve desired vividness, drying after each application, and remove stencil.
Pavement should like lower right.
2. After completely dry, align STENCIL B as shown below.
© 2017 FIT AND FUN PLAYSCAPES, LLC 2 of 2
3. Using thin sized brushes, paint stencil, using small amounts of paint on brush for each
coat. Repeat 1-2 more times to achieve desired vividness, drying after each application,
and remove stencil. Pavement should like below and is complete.
4. Allow to dry for 24 hours before use.
Any questions? We’re here to help – call us at (800) 681-0684!
THIS INFORMATION IS COPYRIGHT MATERIAL. ALL RIGHTS ARE RESERVED.
This manual suits for next models
1
Table of contents
Other FIT AND FUN PLAYSCAPES Toy manuals
