FMS Tech 2000 Series Assembly instructions

FMS Trace 2000 Series
Hardware Installation Manual
Copyright © 2017 | All Rights Reserved | Fleet Management Systems & Technologies

FMS Trace 2K Series | Hardware Installation Manual
p. 2
Copyright © 2017 | All Rights Reserved | Fleet Management Systems & Technologies
Table of Contents
INTRODUCTION
FEATURES & BENEFITS
APPLICATIONS
RECORDING FUNCTION
ACCESSORIES
PRODUCT DESCRIPTION
GPRS SPECIFICATION
GPS SPECIFICATION
FMS RFID DRIVER ACCESS CARD
TECHNICAL SPECIFICATION
WIRE CONNECTION
TEST STATION SIDE - CONNECTOR PIN OUT
TRACE TO TEST STATION CABLE MATCHING TABLE
3
3
4
4
4
5
6
6
6
7
8
9
9

FMS Trace 2K Series | Hardware Installation Manual
p. 3
Copyright © 2017 | All Rights Reserved | Fleet Management Systems & Technologies
Introduction
The FMSTrace 2K is a series of GPS based devices designed to oer users ecient and low cost vehicle tracking system with
easy installation, wireless sensors and high performance tracking system as key features. The FMS Trace 2K is ideal solution
for automotive, security and customs agencies, trucking companies, insurance, stolen vehicle, vehicle nance, auto rental,
and other automotive tracking applications when self-sustainable power for several days is required.
The FMS Trace 2K is a high value tracking device, some of the features are: Small size, Superior GPS performance and 3
multifunction inputs, IP66 waterproof enclosure, inside-the-box antennas, and other optional features.
Features & Benefits
High Performance GPS/GPRS.
Modular and upgradable to include other features.
3 multifunction inputs.
Driver ID (RFID).
IP66 waterproof enclosure.
Ignition relay and immobilization function.
All inside antennas.
Can connect wireless sensors i.e. e-lock, e-gate.
Easy to install and use.
Remote conguration and device settings.
Remote rmware upgrade.
Ignition Input.
Superior internal antennas for both GSM and GPS eliminate the need for wired antennas and make the FMSTrace 2000
mountable virtually anywhere in the vehicle for easy, inexpensive installation.
Information are transported across the GSM/GPRS network using enhanced TCP/IP packets providing a reliable
communications link between the device and your application servers or ours.
Fleet owners can monitor their drivers unsafe driving habits, review trip information, driving performance, time
attendance, and schedule for download at specic time anytime and virtually from anywhere, just require an internet
connection.
Driver Identication (RFID).
The FMS Trace 2K employs the FMS Tech. latest onboard device conguration and settings. All settings and device
congurations including hardware or software settings for all events, thresholds, tolerance, etc., seamlessly with
minimal eorts; just require an internet connection.
The FMS Trace 2K incorporates the FMS Tech., industry leading over-the-air device management and maintenance
software. All conguration and programs inside the hardware device can be changed and upgraded oers out-of-the–
box hands-free conguration and automatic post-installation upgrades.You can also monitor unit health status across
your customer’s eets to quickly identify issues before they become expensive problems.
Alarm buzzer to warn driver upon exceeding certain limit
Key Features
Benets

FMS Trace 2K Series | Hardware Installation Manual
p. 4
Copyright © 2017 | All Rights Reserved | Fleet Management Systems & Technologies
Applications
Accessories
Recording Function
The FMSTrace 2K was designed to dramatically reduce cost, power, and size, while signicantly improve device reliability
in the eld.
The FMSTrace 2K Series Product comes with all necessary accessories and product complements.The package will include
the following:
Speed via GPS
Driver ID
Over speeding
Not wearing seatbelt
Exceeding thresholds
Events value, time & duration
Status of each input
Input values, max & average
Ignition relay & driver access
Analog and digital sensors
Remote immobilization function
Remote conguration
Remote rmware upgrade
Online tracking
Oine tracking
Route & vehicle movement history
Geo Fencing
Waterproof enclosure
e-Lock (Container Seal) No
Trailer ID No
Sky Link Yes
MP3 Voice Alert Yes
Voice Communication No
Driver Fatigue Yes
Tailgating Yes
In Cab Camera Yes

FMS Trace 2K Series | Hardware Installation Manual
p. 5
Copyright © 2017 | All Rights Reserved | Fleet Management Systems & Technologies
Content Specications
Operating voltage - Vehicle Battery
- Optional : (Backup Battery 7.4 V, 750 mAh)
Current consumption 130 mA
CPU 16 bit Microchip DSC 80 MHz
Memory 2 MB Flash Upgradable to 16 MB
Information stored duration 1 Year without power
No. of Inputs 3 and 1 ignition
Interface GRPS, RFID & RS232
Ignition relay External
Driver ID RFID
Download technology Wired and wireless
Indicator 4 LED
Driver Alert External Buzzer (Opt.)
Speed pulse range Speed Thru GPS
Speed measuring range Unlimited
Overvoltage protection Up to 60V (Optional)
No. of digital /analog inputs 4 Bidirectional
Programmable voltage Up to 33 V
Frequency inputs 1 sample per sec.
RFID conformance 13.56 MHz ISO 15693 RFID
RFID Proximity 1– 4 cm
RFID Antenna External
RFID Card Plastic or Tag
Interface RS232 57600 bps Serial
Operating Temperature -20° C +75° C
Storage Temperature -40° C +85° C
Relative Humidity Up to 95%
Dimension 135 mm x 73 mm x 45 mm
Weight 220 g
Enclosure Rugged Plastic
Protection class IP66
Product Description

FMS Trace 2K Series | Hardware Installation Manual
p. 6
Copyright © 2017 | All Rights Reserved | Fleet Management Systems & Technologies
Content Specications
Frequency Quad band GSM 850/EGSM 900 DCS 1800/PCS 1900
Brand & Model NEOWAY-M660SS
Integrated Stacks TCP/IP
Dual Communication and Capability GPRS and SMS
GPRS Packet Up to 80 Kbps
GPRS Antenna Internal Built-in
Tail Gating Yes
In Cab Camera Yes
Content Specications
Model SKM53
Protocol Transmission data NMEA 0183
No. of channels 22 SAT/66 CH
Tracking sensitivity -159 dBm
Frequency 1575.42 MHz L1 C/A Code
Chipset SKM53 GPS Module Micro Control MT3329 Chipset W
Autonomous < 10 m at 2 DRMS
SBAS < 7m at 2DRM,WAAS corrected
DGPS 1-5 m at DGPS corrected
GPS Hot start 1 sec. avg.
GPS Warm start 38 sec. avg
GPS Cold start 42 sec. avg
Content Specications
Supported Standard ISO 15693
Operating frequency 13.56 MHz
Typ. required activation eld strength read (at +25qC) 94 dBPA/m
Typ. required activation eld strength write (at +25qC) 97 dBPA/m
Factory programmed Read Only Number 64 bits
Memory (user programmable) 2k bits organized in 64 x 32-bit blocks
Typical programming cycles (at +25qC) 100000
Data retention time (at +55qC) > 10 years
Simultaneous Identication of Tags Up to 50 tags per second (reader/antenna dependent)
Dimensions 85.6 mm x 54 mm x 0.76mm (according ISO 7810)
Weight 5 grams
Case material PVC (Polyvinyl chloride), white
Product Identier 3mm from the edge,TI Logo + 4 digit number (2 mm x 8 mm)
Surface nish Glossy
Printability Thermos transfer, Tampon, Silkscreen
Mechanical Stability (Bending, Torsion) According to ISO 10373
Operating temperature -25qC to +50qC (according to ISO7810)
Storage temperature -25qC to +50qC (according to ISO 7810)
GPRS Specication
GPS Specication
FMS RFID Driver Access Card

FMS Trace 2K Series | Hardware Installation Manual
p. 7
Copyright © 2017 | All Rights Reserved | Fleet Management Systems & Technologies
Content Specications
Satellite GPS Receiver GPS
Data Network Modem 2G/3G
GSM Technology Quad-Band
Voice Support No
GPS Antenna Int.
GSM Antenna Int.
GPS Hot Start < 6 sec
GPS Cold Start (Open Sky) < 30 sec
No. of Satellite Channels 22 SAT/66 CH
TCP/IP Yes
No. of inputs 4
Digital/Analogue 4
Frequency 0
Ignition Input 1
No. of outputs 2
RS 232 1
ZigBee 2.4 GHz Wireless Optional
Wireless 2.4 GHz Function Optional
Speed via GPS Yes
Speed via Gearbox No
Engine RPM No
Driver Identication Yes
Driver Identication Technology RFID
Panic Button Optional
Remote Immobilizer Yes
Ignition Relay Ext.
Harsh Braking No
Harsh Acceleration No
Vibration (Graded Road) Yes
Movement sensor Yes
Harsh shock Yes
Idle time Yes
Online Tracking Yes
Oine Tracking Yes
No. of Events Unlimited
Tolerance conguration Yes
Buzzer Alarm Yes
Internal Battery Optional
Internal Battery Autonomy 1-5 hours
Events Conguration limited
No. of reports 30+
Memory Size 4 MB
Power Consumption @12VDC 200ma
Power Spike Protection 150v
Main Harness Cable Yes
Additional Harness Cable No
Cigarette Lighter Power Cable No
Technical Specification

FMS Trace 2K Series | Hardware Installation Manual
p. 8
Copyright © 2017 | All Rights Reserved | Fleet Management Systems & Technologies
Wire Connection
Color PIN Description Wire Length
Red 1 Power ( Vehicle Battery ) 2.5 meter
Yellow / Green line 2 RS485-B (RFID Antenna) 30 CM
Gray 3 RS232 - Data in 2.5 meter
Yellow 4 RS232 - Data out 2.5 meter
White / Yellow line 5 A/D In4 or Buzzer 2.5 meter
White / Green line 6 A/D In3 Or Relay 2.5 meter
White / Red line 7 A/D In2 Or External Output 2 2.5 meter
White / Violet line 8 Ignition - A/D In1 2.5 meter
Brown 9 Power (Vehicle Ground ) 2.5 meter
Yellow / Red line 10 RS485-A (RFID Antenna) 30 CM
Brown / Black line 11 GND (Out for RFID Antenna) 30 CM
Pink 12 Output (9V for RIFD Antenna) 30 CM
NOTE:
The wire diameter is AWG 22#
Brown/Black Line ,PIN 11 (GND OUT) This used for RFID Module.
Figure 1: Wire Diagram

FMS Trace 2K Series | Hardware Installation Manual
p. 9
Copyright © 2017 | All Rights Reserved | Fleet Management Systems & Technologies
Figure 2: Female connector PIN
Test Station Side-Connector Pin out
Trace 2K to Test Station Cable Matching Table
Color PIN Description
Brown 1 Power (Vehicle Ground)
Red 2 Power (Vehicle Battery)
White/Violet line 3 Ignition - A/D In1
White/Red line 4 A/D In2 Or External Output 2
White/Green line 5 A/D In3 Or Relay
White/Yellow line 6 A/D In4 or Buzzer
Yellow 7 RS232 - Data out
Gray 8 RS232 - Data in
Color PIN
(Trace 2K)
PIN
(Test Station)
PIN
(RFID) Description
Red 1 2 - Power (Vehicle Battery)
Yellow / Green line 2 - 2 RS485-B
Gray 3 7 - RS232 - Data Trace 2K In -Test Station Out
Yellow 4 8 - RS232 - Data Trace 2K Out - Test Station In
White / Yellow line 5 6 - A/D In4 or Buzzer
White / Green line 6 5 - A/D In3 Or Relay
White / Red line 7 4 - A/D In2 Or External Output 2
White / Violet line 8 3 - Ignition - A/D In1
Brown 9 1 - Power (Vehicle Ground)
Yellow / Red line 10 - 3 RS485-A
Brown / Black line 11 - 4 GND (Out)
Pink 12 - 1 Output 9V
1
23
4
5
6
7
8
9
10
11
12