fonality FaxLync User manual

FaxLync
Quick Start Guide
Welcome to Fonality FaxLync! This little device connects your traditional fax
machine to the cloud. In just ve quick steps, you’ll eliminate the need for
a costly land line. You’ll be able to send and receive faxes just as you do
today with a standard fax machine.
What’s in the Box
• FaxLync device
• 12V power adapter
• Ethernet cable
• RJ-11 phone cable/connector

Your Fonality FaxLync is ready to work right
out of the Box.
1 Connect the phone cable from your
fax machine to the “Phone 1” port
on the back of your FaxLync.
2 Connect the Ethernet cable to the
“WAN” port. (Don’t use the port
marked “LAN/PC.”)
3 Connect the power adapter to the
FaxLync and plug in your power outlet.
4 Look for the status LED lights on the
front of your FaxLync. The green
POWER LED will light up.
5 When the initialization process
completes (~60 sec.), the STATUS LED
will change from red to green. When
the lights look like the picture below,
you’re good to go!
CONGRATULATIONS!
You’re ready to send and receive faxes.
Install didn’t go as expected or need other technical assistance?
Visit www.fonality.com/support or call 866-FONALITY to chat with our Support team.
5 simple steps to install FaxLync
3
2
1