FONESTAR SPR-548N User manual

SPR-548B, SPR-548N, SPR-548P
ADJUSTABLE AND EXTENDABLE CEILING MOUNT
FOR PROJECTORS
INSTRUCTION MANUAL

- 2-
DESCRIPTION
- Adjustable and extendable ceiling mount for projectors.
- ±15º vertical tilt.
-±10º side tilt.
- Horizontally adjustable.
- Distance to ceiling: 43 to 65 cm with extension, 12 cm without extension.
- Colour: SPR-548B = White.
SPR-548N = Black.
SPR-548P = Silver.
- Maximum borne weight: 20 kg.
- 4 x 15 cm arms and 2 x 10 cm arms, adjustable to the projector.
- Ceiling plate: 10 x 10 cm.
ASSEMBLY INSTRUCTIONS
CAUTION: make sure that the surface the mount is going to be installed on is resistant enough and
completely flat.
ACCESSORIES
EN

EN
-3-
1.-
2.-
3.-

EN
-4-
4.-
5.-

6.- FIXING THE MOUNT TO THE INSTALLATION SURFACE
FIXING THE MOUNT TO THE PROJECTOR
7.-
- 5-
EN

8.-
- 6-
EN

9.- ADJUSTING THE POSITION OF THE PROJECTOR
- 7-
EN

-8-
IMPORTANT
1.- The installation surface must be totally flat. Make sure that the holes in the ceiling coincide with the holes
on the plate and screw the mount to the ceiling.
2.- To adjust the postion of the projector, loosen the corresponding bolts, move the projector to the desired
position and tighten the bolts. ever force the projector into a position without previously loosening the
bolts, to avoid breakage.
3.- In order to hold the maximum weight the mount must be firmly fixed to the ceiling or installation surface.
FONESTAR does not hold itself responsible for damage or breakages that could occur due to the mount
falling away from the ceiling because of faults in the ceiling itself, the fixing method used or incorrect
manipulation.
WARRANTY
This product has been tested and has passed the corresponding quality control prior to being put on the market.
FONESTAR guarantees the suitability of the product for its specified use during a period of 2 years from the delivery date and
commits itself to repair or substitute the goods as expressed in the Spanish law ‘La Ley General para la Defensa de los
Consumidores y Usuarios, Real Decreto Legislativo 1/2007 16 oviembre.
The lack of conformity in the first six months after purchase, due to a manufacturing defect, will be rectified with no more than
showing the proof of purchase. After six months FONESTAR reserves the right to demand proof of the product being sold
with that problem.
This warranty does not include damage produced by: inappropriate use or negligence, accidents, worn out parts due to use,
breakages, burns, spilt liquids or other substances, excessive humidity, battery deterioration and internal manipulation of the
device, the software or its components by unauthorized persons, and in general any use that is unrelated to the nature and
purpose of the product.
If any service is needed during the warranty period because of lack of conformity, please contact the business or distributor
where the product was purchased in no more than 2 months after being conscious of the problem. It is only necessary to
contact FONESTAR if it is impossible or imposes an undue burden for them to solve it.
To benefit from this warranty it is necessary to show the proof of purchase with the date clearly visible, with no corrections or
crossing out.
This document adds information, and never decreases the consumers’ rights, which in all cases are protected by the Spanish
law ‘La Ley General para la Defensa de los Consumidores y Usuarios, Real Decreto Legislativo 1/2007 16 oviembre.
FONESTAR is a member of ECOEMBALAJES ESPAÑA, S.A. “ECOEMBES”, with number 03497 and all our
products carry the symbol, backed by our membership and subscription to the above mentioned organization
with the recycling and subsequent management of our packaging.
FO ESTAR S.A. - IF A28780443 - Apartado 191 - 39080 - Santander, Cantabria, (Spain) www. onestar.com
EN