Assembly
(1) Open the shutter and push the hose in the canister opening. (2) Connect the hose handle to the telescopic tube. (3) Connect the
telescopic tube to the Autocombination floor nozzle. (4) To extend the length of the telescopic tube slide the lock down. To reduce the
extension, slide the lock up. (5) Pull out the cable and connect it to the mains.
Operation
From the handle
(6) To start the vacuum cleaner press on the /AUTO button. The unit will start in the Intelligent Power Control (IPC) mode. (7) To
manually increase or decrease the power level, press on the + or – button. (8) To return to the Intelligent Power Control mode from the
Manual mode press once on the /AUTO button. (9) Press on the “brush” button to turn ON/OFF the power brush (optional accessories).
(10) In the Intelligent Power Control mode press once on the /AUTO button to turn off the vacuum cleaner.
From the unit
(11) To start the unit press on the ON/OFF foot pedal. The unit will start in Intelligent Power Control mode. To switch off the vacuum
cleaner press on the foot pedal. (12) To change to the manual mode press on the +/- buttons. (13) You can manually set the carpet
function by switching the button towards the back as indicated on the brush. (14) You can manually set the hard floor function by switching
the button towards the front as indicated on the brush. (15) For short breaks insert the nozzle in the side parking position. The motor will
then stop running. If the break is longer then 5 minutes the Forbes Intelligence™ will turn off automatically for safety reason.
O