EUFY MACH V1 User manual

Owner's Manual
V1

Table of Contents
Overview…………………………………………… 02
Button Control ………………………………… 03
Charging …………………………………………… 04
Turning On………………………………………… 05
Initial Setup
Using the MACH Vacuum Cleaner 06
Add Water and Floor Cleaner
Start / Stop cleaning
LCD Screen Guide…………………………… 09
Selecting a Cleaning Mode ………… 10
Using the Trigger …………………………… 10
Using the Menu ……………………………… 11
Status Light Indication ………………… 12
Turning Voice Prompts On or O 12
Maintenance …………………………………… 13
Self-Cleaning and Self-Drying
Drying of the Rolling Brush
Clean the Dirty Water Tank
Clean the Rolling Brush Manually
Clean the High-Performance Filter
Clean the Removable Cover
Troubleshooting ……………………………… 17
Specications ………………………………… 17
Customer Service…………………………… 18

02 EN
Overview
max
mach
Mode button
Power button
LCD display screen
Rubber cover
Clean water tank
High-performance filter
Dirty water tank
Rolling brush cover
Multi-surface rolling brush
(Not suitable for use on
high-pile rugs)
Removable cover
Charging base
Self-cleaning button
Handle bar
Floor cleaner switch
Trigger
Rubber cover
Floor cleaner tank
Power cord
Additional
high-performance filter
Floor cleaner Additional multi-surface
rolling brush
Cleaning tool

02 EN EN 03
Button Control
Action Function
1s
Press and hold the power button for
1 second • Turn on or o
Press the power button • During cleaning, pause or resume current task
• During menu setting, skip to the previous menu option
1s
Press and hold the mode button for
1 second • Enter menu setting mode
Press the mode button
• Select a mode
• Smart mode (default)
• Suction mode
• During menu setting, skip to the next menu option
Press the self-cleaning button • Start self-cleaning and self-drying
Press and hold the self-cleaning
button for 2 seconds • Turn voice prompts on or o
Hold the trigger • In smart mode, activate more powerful cleaning
• In suction mode, activate more powerful suction
Hold the trigger for 2 seconds
(when placed on the charging base) • Dry the rolling brush
Press the trigger • During menu setting, confirm a selection
Turn anticlockwise Turn the floor cleaner switch on
Turn clockwise Turn the floor cleaner switch o

04 EN
Charging
Before first use, fully charge the MACH Vacuum Cleaner for 4 hours.
1
2
max
m a c h
3
1Wrap your power cable as needed and keep your cable organized.
2Connect the power cord to a power outlet.
3Place the MACH Vacuum Cleaner onto the charging base.
• The LCD display lights up and you will hear a voice prompt, indicating that the MACH Vacuum Cleaner
starts charging.
• The power plug varies by region.
• The charging speed depends on the working mode and ambient temperature. Before use, wait patiently
until the charging is complete.

04 EN EN 05
Turning On
1
max
max
mach
1s
2
1Gently step on the foot pedal and push the handle bar backward until you hear a click.
2Press and hold the power button for 1 second to turn on the MACH Vacuum Cleaner.
• The LCD display lights up.
Initial Setup
Before you start, make sure that:
• Your smartphone or tablet is running iOS 10.0+ or Android 5.0+.
• The 2.4GHz band wireless signal is enabled on your wireless router.
For first-time use, the boot animation will guide you to learn the basic operations, select a voice prompt language,
scan the QR code to download the eufy Clean app, and complete the Wi-Fi connection.
• To better understand the operation and maintenance of this device, and obtain the latest product
services and information, please scan the QR code to download the eufy Clean app.

06 EN
Using the MACH Vacuum Cleaner
Add Water and Floor Cleaner
Add Clean Water
1
max
2
max
max
Click
3 4
max
1Remove the clean water tank from the MACH Vacuum Cleaner.
2Open the rubber cover.
3Add tap water until it reaches the MAX water line.
• Do not use mineral or purified water.
4Replace the clean water tank.
• You will hear a click when the clean water tank is locked in place.

06 EN EN 07
Add Floor Cleaner
12 3 4
Click
1Remove the floor cleaner tank.
2Open the rubber cover.
3Add floor cleaner into the floor cleaner tank.
4Replace the floor cleaner tank. You will hear a click when it is locked in place.
• To use the floor cleaner during cleaning, make sure the floor cleaner switch is turned on.
• Do not add hot water above 50 degrees, alcohol and corrosive liquid into the water tank.
• Use the floor cleaner designated by eufy only. Use with any other cleaner may cause severe damage to
the MACH Vacuum Cleaner.
• Do not add floor cleaner with too much foam as it will cause false alarms.
• Do not put the water tank into a microwave for heating.

08 EN
Start / Stop cleaning
• The MACH Vacuum Cleaner cannot clean high-pile rugs more than 1cm in height.
• Do not clean carpets which are made of materials including wool or other animal furs.
• It is recommended to clean your carpets in suction mode.
3
2
Click
max
mach
1s
1
max
max
mach
max
After Wi-Fi setup, start cleaning in the smart mode by default.
• To change the cleaning mode, refer to the "Selecting a
Cleaning Mode" section.
• To pause or resume current task, press the power button.
3
2
Click
max
mach
1s
1
max
max
mach
max
To stop cleaning,
• press and hold the power button for 1 second; or
• push the handle bar forward until you hear a click.
3
2
Click
max
mach
1s
1
max
max
mach
max
Place the MACH Vacuum Cleaner onto the charging base to
charge, and then press the self-cleaning button to start
self-cleaning and self-drying (see the Maintenance section).

08 EN EN 09
LCD Screen Guide
The LCD screen will show you the working status of the MACH Vacuum Cleaner.
4
2
7
3
5
1
6
1Shows current volume level of voice prompts
(High / Low / Mute)
2Shows the animation of current work mode
3 Lights up when floor cleaner switch is turned on
4Shows current charging status / battery level
Shows current mode name when switching work modes
5Lights up when operating the device under maximum power condition
6 Intelligently shows current cleanliness status of your floor
7Lights up when ozone disinfection is enabled
Smart mode Suction mode
The different color of light bar indicates different cleanliness status.
Dirty Half-dirty Clean