FORENO Primus PBT1 User manual

9421009 514076
FORENO TAPWARE (NZ) LTD | Freephone: 0508 FORENO | [e-mail] | 5 Hewlett Street, Port Whangarei 0110 | FORENO.CO.NZ
Primus Basin Taps
PBT1
O Ring
Bench/Vanity Top
(not supplied)
Basin Spacer
Back-nut
Tail-Pipe
Handle
(different for
each range)
Lip
*Mains Pressure
Valve (1 per tap)
Supply Hose
(not supplied)
Congratulations on your purchase of this high quality product from Foreno Tapware.
Please read the following before installation and retain (along with your receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 17kPa
Maximum operating Pressure = 500kPa
Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
Mains Pressure systems Insert the valve from the mains pressure pack.
Unequal Low Systems Install as supplied.
Equal Low systems Install as supplied.
INSTALLATION
For pressures exceeding 500kPa install a pressure reducing valve.
Failure to do so may void the warranty.
• Drill a minimum 25mm hole within the vanity top.
• Remove back-nut and basin spacer.
• Mount tap with o-ring in base groove.
• Fit basin spacer underneath and tighten on back-nut.
• Connect to plumbing.
• Turn on water supply. Check for leaks.

PROUD PARTNER AND SUPPORTER OF MASTER PLUMBERS, GASFITTERS AND DRAINLAYERS
FORENO TAPWARE (NZ) LTD | Freephone: 0508 FORENO | [e-mail] | 5 Hewlett Street, Port Whangarei 0110 | FORENO.CO.NZ
ATTACH PROOF OF PURCHASE HERE
WARRANTY
Please refer to our website for warranty information: www.foreno.co.nz/warranty
In the unlikely event that this product fails during its warranty period, phone our Customer Service team
immediately on 0508 FORENO (0508 367 366) – as unauthorised removal of the product may void the warranty.
CARE AND MAINTENANCE
Chrome-plated finishes should not be cleaned with astringent, abrasive or citric cleaners.
A so, damp cloth is recommended for cleaning. Mild soap solutions can also be used on occasion.