Glacier bay 67574W-6001 Assembly instructions

THANK YOU
INSTALLATION AND CARE GUIDE
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM
TWO-HANDLE LAVATORY FAUCET
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this lavatory
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
8/2015 REV.01YOW
Model#
67574W-6001
67574W-6004
67574W-6016
SKU#
703467
703462
703469

2
Table of Contents
Safety Information....................................2
Warranty ...................................................2
Pre-Installation.........................................2
Planning Installation ..............................2
Tools Required .......................................2
Package Contents..................................3
Installation................................................4
Operation...................................................7
Care and Cleaning ....................................8
Service Parts ........................................... 8
Safety Information
Please read and understand this entire manual before
attempting to assemble, operate, or install the product. CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.
Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-
5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for
more details.
Adjustable
wrench
Safety
goggles
Phillips
screwdriver
SILICONE
Silicone (2) Supply
lines
Basin
wrench
Pre-Installation
PLANNING INSTALLATION
TOOLS REQUIRED
Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package
Contents section. If any part is missing or damaged, do not attempt to install the product.

3
Pre-Installation (continued)
PACKAGE CONTENTS
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Part Description Quantity
A 1
B Hot end valve 1
C Cold end valve 1
J
Quick connect
assembly 1
Spout assembly
D 2
E Nut 2
F Screw 4
Washer
G 1
H
Washer
1
I
Nut
K
1Stopper
L
1Flange
M
1Gasket
N
1Nut
O
1Pop-up body
P
1Pivot nut
Q
1Horizontal rod
R
1Clip
T
1Strap
S
1Screw
Part Description Quantity
1Lift rod assembly
A
B
C
D
F
G
H
I
J
K
L
M
N
O
P
Q
RS
T
E

4
Installation
1 Installing the spout assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□Shut off the water supply.
□Place the spout assembly (A) through the middle
mounting hole in the sink.
□Secure the spout assembly (A) with the washer
(G) and the nut (H). Use the basin wrench to
tighten the nut (H).
2 Connecting the hot and cold
valves
□Slide the hot and cold end valves (B & C) through
the sink mounting holes. Make sure the long
tubes are installed away from the spout
assembly (A).
□Secure the end valves (B & C) with the washers
(D) and the nuts (E). Hand tighten the nuts (E)
onto the end valve (B & C) shanks. Lock the nuts
(E) into position by tightening the screws (F) with
a phillips screwdriver.
NOTE: The hot side end valve is labeled.
H
G
A
C
B
F
D
E

HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
5
Installation (continued)
3 Connecting the hose
□Align the tabs (1 & 2) on the quick connect
assembly (I).
□Push the quick connect assembly (I) rmly
upward and snap it onto the receiving tube tab.
Pull down moderately to ensure the connection
has been made.
□If it is necessary to remove the quick connect
assembly (J), squeeze the tabs on the hose,
and then pull down to disconnect.
4 Making the waterline
connections
NOTE: The hot side inlet tube is indicated by a label.
If the label is not present, the hot supply tube is the longer
of the two inlet tubes.
□Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
NOTE: Before tightening the faucet connector to the water
supply, apply a second wrench to the supply tube tting.
This will prevent the supply tube from moving or twisting
when tightening the faucet connector. Do not overtighten.
1
I
2
3
12

6
Installation (continued)
Installing the horizontal rod,
stopper, and strap
5
Preparing the pop-up assembly
□Remove the stopper (J) and the ange (K).
□Screw the nut (M) all the way down, and push the
gasket (L) down.
7
□Remove the pivot nut (O).
□Install the horizontal rod (P) and the stopper (J),
as shown (1).
□Hand tighten the pivot nut (O).
□Attach the horizontal rod (P) to the strap (S)
using the clip (Q).
6 Installing the pop-up body and
pop-up flange
□Apply silicone to the underside of the ange (K).
□Insert the pop-up body (N) into the sink. Screw
the ange (K) onto the pop-up body (N). The pivot
hole (1) must face the back of the sink.
□Use the groove joint pliers to tighten the nut (M),
but do not over tighten. Do not turn the pop-up
body (N) while tightening the nut (M) or the
sealant may not seal properly. Clean away
any excess putty.
K
J
M
L
N
1
M
SILICONE
K
O
P
J
1
S
Q

7
Installation (continued)
8 Installing the lift rod
□Insert the lift rod (T) through the spout
assembly (A) and into the strap (S).
□Tighten the screw (R).
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
1Flushing and checking for leaks
□Turn on the water supply and allow both hot
and cold water to run for at least one minute
each. This ushes away any debris that could
cause damage to internal parts.
□While the water is running, check for leaks.
□Turn off the water and replace the aerator.
Operation
A
T
RS
1
9Remove the quick connector
□If it is necessary to remove the quick connector
(1), squeeze the tabs (2) on the quick connector
and then pull down to disconnect.
Squeeze
Pull
down
1
2
IMPORTANT: After installation is complete, remove the
aerator to ush the water lines. Do not lose the gasket (1) in
the aerator.

8
Care and Cleaning
□
□
□Do not use abrasive cleaners when cleaning this faucet.
Service Parts
*Specify Finish
Part Description Part Number
1
RP13188*
2Screw RP50169
3
4
5
6
7
Cartridge (H) RP20035
8
Cartridge (C) RP20036
9
Flange RP80291*
Handle
14
Nut RP56059
O-ring RP60002
Part Description Part Number
10
11
12
Washer RP64147
15
Screw RP50004
16
Aerator RP30220*
17
Washer RP70228
Nut RP56091
Bonnet RP70435 Block RP70421
19 Lift rod & lift rod knob RP40118*
20 Pop-up assembly less
lift rod RP40027*
18 Quick connect
assembly RP70430
13
O-ring RP60020
Handle seat RP17148*
Index RP80242*
1
2
34
5
6
7
8
9
10
11
12
14
15
16
17
18
13
19
20

Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM
Retain this manual for future use.

GRACIAS
GUÍA DE USO Y MANTENIMIENTO
¿Problemas, preguntas o piezas faltantes?
Antes de regresar a la tienda, llama al servicio al cliente de
Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los
sábados entre 9 a.m. y 6 p.m.(hora estándar del Este)
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM
Modelo núm.
67574W-6001
67574W-6004
67574W-6016
GRIFO PARA LAVAMANOS, DE DOS LLAVES
Agradecemos la conanza que has depositado en Glacier Bay al comprar este grifo para lavamanos. Nos esforzamos
por crear continuamente productos de calidad diseñados para mejorar tu hogar. Visítanos en Internet para ver
nuestra línea completa de productos disponibles para las necesidades de mejoras de tu hogar. ¡Gracias por
elegir a Glacier Bay!
SKU núm.
703467
703462
703469