HD04
Installation View:
1. Connect HDMI source to HDMI splitter Input A or B input,Output 1~4 to monitor.
2. Output 1 as EDID Master Port. Recommend connect all HDMI equipments first, then
power on, it will auto copy Master Port EDID for HDMI source reference which take around
10 seconds.
3. Input A、B by front button selection.
4. Input LED flash: no any signal detected.
5. Press A, B buttons together to activated/disabled auto jump function.
6. Auto Jump function ON: A, B Blue LED flash at same time.
7. Auto Jump function OFF: A, B Blue LED on at same time.
LED Indication:
POWER ON/OFF Green
INPUTA Blue
INPUTB Blue
OUTPUT 1 Blue
OUTPUT 2 Blue
OUTPUT 3 Blue
OUTPUT 4 Blue
Remark:
1. There are some DVD equipments still have +5V signal output under power off status, it will
cause auto jump function abnormal, please disable auto jump and setup by press A, B button to
avoid any abnormal operation.
2. HD02/H04 no memory function, it will back to factory default once power off. (inputA, auto
jump function off)
2
FORESIGHT CCTV INC. | 5863 Leslie Street, Unit#713, North York, Ontario,Canada, M2H 1J8 | http://www.foresight-cctv.com | 1-888-GO2-CCTV