Forever Redwood WOOD PATIO BENCH User manual

ASSEMBLY INSTRUCTIONS FOR THE
WOOD PATIO BENCH
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
WOOD PATIO BENCH
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
Drawing
Description
Bench
Legs
Qty.
1
4
HARDWARE LIST
No.
A
Drawing
Description
5/16´´ X 5 ½´´ Bolts
(To attach the legs to the bench).
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.
Note: Dimensions of your hardware will vary depending on size.

P| 2
WOOD PATIO BENCH
www.ForeverRedwood.com
No
1
2
DESCRIPTION
Bench
Legs
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.
1
2
2
2
2

P| 3
WOOD PATIO BENCH
www.ForeverRedwood.com
Step 1: Place the bench (1) upside down. After that, use 5/16´´ x 5 ½´´ bolts (A) to attach the legs (2) to the bench, as shown
below. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2: Finally, turn the Bench over its feet.
1
2
2
2
2
5/16´´ X 5 ½´´ Bolts

P| 4
WOOD PATIO BENCH
www.ForeverRedwood.com
This completes the Bench Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.