Foxfury Lighting Solutions D10 PARROT ANAFI User manual

PRODUCT MANUAL
P/N 700-314 | P/N 700-316 P/N 700-315 | P/N 700-317
D10 PARROT ANAFID10 PARROT ANAFI
LIGHTING SYSTEMLIGHTING SYSTEM

2
TABLE OF CONTENTS
INTRODUCTION
Overview 3
Physical Characteristics 3
Reference Guide 4 - 5
BATTERY
Charging the Battery 6
OPERATIONAL MODES
Operational Modes 6
Modes, Output & Battery Life 6
INSTALLATION 7 - 8
CARE/CLEANING 9
WARNINGS/WARRANTY 9
CONTACT FOXFURY 10

3
DIMENSIONS 4.13 x 2.81 x 2.58 in (105 x 71.5 x 65.5 mm)
WEIGHT 1.27 oz (36 g)
DIMENSIONS 1.07 x 0.77 x 1.4 in (27.3 x 19.5 x 36 mm)
WEIGHT 0.42 oz (12 g)
OVERVIEW
The D10 Parrot ANAFI Lighting System is a saddle mount and 3 D10 lights
that is Made in the USA for the Parrot ANAFI Thermal drone or for the Parrot
ANAFI USA drone. The D10's 30° LED operates on continuous or strobe light
modes. This rechargeable and splashproof light is durable and compact for a
variety of uses where light is needed in a tight space. All 3 lights rotate 360°
for optimum light placement.
IMPORTANT!
Please fully charge the D10 before using it for the first time. Please read this
manual before using your D10 Parrot ANAFI Lighting System as it relays
beneficial operating and safety Information.
D10 Light (White or IR)
D10 ANAFI Thermal Saddle Mount P/N 85-039
D10 ANAFI USA Saddle Mount P/N 85-042
PHYSICAL CHARACTERISTICS
DIMENSIONS 3.35 x 2.26 x 2.33 in (85 x 57.3 x 59.2 mm)
WEIGHT 0.74 oz (21 g)

4
REFERENCE GUIDE
D10 ANAFI LIGHTING SYSTEM
ANAFI THERMAL ANAFI USA
P/N 700-314 | P/N 700-316 P/N 700-315 | P/N 700-317
THERMAL SADDLE USA SADDLE
WHAT'S INCLUDED
D10 LIGHT
D10 PARROT ANAFI D10 PARROT ANAFI
D10 White Light (3 ea) for P/N 700-314 OR
D10 IR Light (3 ea) for P/N 700-316
D10 Parrot ANAFI Thermal Saddle
Micro USB Cable (3 ea)
D10 White Light (3 ea) for P/N 700-315 OR
D10 IR Light (3 ea) for P/N 700-317
D10 Parrot ANAFI USA Saddle
Micro USB Cable (3 ea)
P/N 700-314 | P/N 700-316
P/N 700-315 | P/N 700-317

5
WARNINGS
Please fully charge the D10 before using it for the first time.
Do not stare into the LEDs for long periods of time or from a close range (less than
2 ft / 0.6 m).
While using any FoxFury product, please operate at safe speeds.
It is the responsibility of drone/UAV users to follow the FAA and global laws and
regulations and/or the laws and regulations applicable to the flight location.
REFERENCE GUIDE
D10 LIGHT
POWER/MODE
MICRO USB 360° SWIVEL
BUTTON
LIGHT
CHARGING PORT
CHARGING PORT

6
WARNING:
Unplug the light once charged to avoid impacting battery life.
If battery is fully discharged because the unit may have not been in use for
many months, please charge fully.
OPERATIONAL MODES
Press and hold Power/Mode Button for 3 seconds to turn light ON.
For IR version, the green light will blink once before turning on the invisible
light.
Press Power/Mode Button again to turn the light to STROBE.
For IR, the green light will blink twice before the light output is in strobe
mode.
Press the Power/Mode Button again to turn light OFF. For IR, the green
light will blink three times before turning OFF.
CHARGING THE BATTERY
Connect the provided Micro USB Cable to the Charging Port, and to a
USB source.
While charging, a green light will blink. Once charged, the green light will
remain steady on.
Charge time should be approximately 1 hour.
OPERATIONAL MODES
BATTERY
MODE WHITE
LUMENS
IR
mW BATTERY LIFE
ON 200 400 30 - 40 minutes
STROBE 200 400 60 - 80 minutes

7
INSTALLATION
Align the bottom of the D10 light with Saddle snap lock location and snap
all D10 units in place. Spin them and tug to make suer they are properly
attached.
Take the Saddle with lights installed, and mount on the ANAFI, as shown
below (lights are removed for simplicity).
Hook the two teeth to the underside of the top cover on the ANAFI
(behind the camera) as shown.
1
1 2

8
Press down on the body. The Saddle side arms will spread and hug the
belly of the ANAFI.
INSTALLATION
The Saddle should feel snug as it wraps around the body.
1
3
NOTE: When recharging D10 lights, they can either be removed from the
Saddle or remain installed.

9
Usage of this product must be
supervised by an adult when it is
being used by a minor.
Any FoxFury product should
be operated at speeds safe
enough to maneuver around
surrounding obstacles.
Do not use under the influence
of drugs or alcohol.
ONE YEAR WARRANTY
FoxFury, LLC (“FoxFury”) warrants
this product to be free from defects
in material for one year after
purchase. LiPo batteries have a one
year pro-rated or 300 re-charge cycle
pro-rated warranty, whichever the
user reaches first.
This warranty is given only to the
original end user of the accompanying
product. If you purchased a product
from someone other than an
authorized FoxFury reseller/distributor
or if the product was used, (including
but not limited to demo models, show
models or refurbished product by
someone other than FoxFury) prior
to your purchase, you are not the
Original Purchaser and the product
that you purchased is not covered by
this warranty. This warranty is VOID
if this Product has been altered or
modified in any way (including but not
limited to attempted warranty repair
without authorization from FoxFury
and/or alteration/removal of the
serial number). To expedite warranty
concerns, we encourage the end user
to register their FoxFury Product at
www.foxfury.com/pages/warranty-
registration.
PRODUCT DURABILITY
PRODUCT NAME & PART NUMBER:
D10 ANAFI Thermal Lighting System
P/N: 700-314 (WHITE) & 700-316 (IR)
D10 ANAFI USA Lighting System
P/N: 700-315 (WHITE) & 700-317 (IR)
CARE/CLEANING
Your FoxFury product is a professional
tool. Regular maintenance and care of
your light will maximize performance for
you. As needed, clean your FoxFury
product using a damp soft washcloth.
Do not immerse.
ACCESSORIES
D Series Mount Set (P/N 850-730)
WARNINGS
FoxFury, LLC is not responsible for the
incorrect use of any FoxFury Lighting
product.
Lights are strong enough to cause
damage to the human eye.
Do not stare into LEDs for long
periods of time or from a close
range (less than 2 ft / 0.6 m).
FoxFury, LLC is not responsible
for any injury or damage caused
during the use of this product.
WARRANTY AND OTHER
INFORMATION
3 M

10
THIS IS THE ONLY WARRANTY,
EXPRESSED OR IMPLIED,
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES ARE
EXPRESSLY DISCLAIMED EXCEPT
WHERE SUCH LIMITATION IS
PROHIBITED BY LAW.
You may have other specific legal
rights which vary by jurisdiction. Go to
www.foxfury.com/pages/warranty for a
complete copy of the warranty. Retain
your receipt for proof of purchase.
CONTACT FOXFURY
FoxFury, LLC
Oceanside, CA 92056 USA
Toll-Free: 844-FOXFURY
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: FoxFury.com
All FoxFury products are designed in
Oceanside, CA. All FoxFury products
are manufactured with the highest
quality USA and foreign parts.
Products are assembled in either
FoxFury’s controlled plant in Asia or the
USA, under strict quality control.
CALIFORNIA
PROPOSITION 65
This product can expose you to
chemicals including Lead and DEHP,
which are known to the State of
California to cause cancer and
birth defects or other reproductive
harm. For more information go to
www.P65Warnings.ca.gov.

FOXFURY.COM 09/2021