Foxfury Lighting Solutions D3060-TC User manual

PRODUCT MANUAL
700-320 | 700-321
D3060-TC LIGHT SYSTEM FOR SKYDIO X2D3060-TC LIGHT SYSTEM FOR SKYDIO X2

2
TABLE OF CONTENTS
INTRODUCTION
Reference Guide 3
Overview 4
Physical Characteristics 4
BATTERY
Charging the Battery 5
OPERATIONAL MODES
Modes, Output & Battery Life 5 - 6
INSTALLATION 6 - 7
CARE/CLEANING 8
WARNINGS/WARRANTY 8 - 9
CONTACT FOXFURY 9
IMPORTANT!
Please read this manual before using your D3060 for Skydio X2 as it relays
beneficial operating and safety Information.

3
A A
B B
2
2
1
1
REFERENCE GUIDE
D3060 LIGHT
SKYDIO X2
SADDLE MOUNT
CHARGING PORT
FRONT LIGHT
DORSAL LIGHT
POWER/MODE SWITCH
FOR FRONT LIGHT
CHARGING PORT
POWER/MODE SWITCH
FOR DORSAL LIGHT
USB-C
WHAT'S INCLUDED
SNAP LOCK (4 EA)
SKYDIO X2 Saddle Mount
D3060 Light (2 ea)
USB-C Cable (2 ea)
A A
B B
2
2
1
1
D3060-TC 2 Light System
P/N 700-320
SKYDIO X2 Saddle Mount
D3060 Light (4 ea)
USB-C Cable (4 ea)
D3060-TC 4 Light System
P/N 700-321

4
WARNINGS
Please fully charge the D3060 before using it for the first time.
Do not stare into the LEDs for long periods of time or from a close range
(less than 2 ft / 0.6 m).
While using any FoxFury product, please operate at safe speeds.
Be sure to rinse the D3060 with fresh water immediately after use in the
ocean or a pool.
It is the responsibility of drone/UAV users to follow FAA and global laws
and regulations and/or the laws and regulations applicable to the flight
location.
OVERVIEW
The Skydio X2 Light System is a custom saddle and D3060 lights that is
proudly made in the USA. It is designed specifically for the Skydio®X2 drone.
This product was developed independently by FoxFury for the Skydio®X2.
The D3060 lights are strobe-capable with 30° and 60° dual LEDs that operate
independently to provide 360° anti-collision lighting. The waterproof D3060
is rechargeable via USB-C and offers best-in-class durability. It lasts 1.5 to 3
hours on a single charge, and only weighs 1.1 oz (31.2 g).
PHYSICAL CHARACTERISTICS
D3060 LIGHT
DIMENSIONS 1.3 x 2.3 x 0.9 in (33 x 58 x 23 mm)
WEIGHT 1.1 oz (31.2 g)
SKYDIO X2 SADDLE MOUNT
DIMENSIONS 4 x 3.03 x 2.05 in (101.5 x 77 x 52 mm)
WEIGHT 1.17 oz (33.1 g)
TOTAL WEIGHTS
P/N 700-320 3.37 oz (95.5 g)
P/N 700-321 5.57 oz (157.9 g)

5
WHITE LIGHT MODE LUMENS BATTERY LIFE
FRONT LIGHT ONLY
HIGH 200 1.5 hours
LOW 60 2.5 hours
STROBE 200 2 hours
DORSAL LIGHT ONLY
HIGH 160 1.7 hours
LOW 50 3 hours
STROBE 160 2 hours
BOTH FRONT AND
DORSAL LIGHTS
HIGH N/A* N/A*
LOW 60 FRONT
50 DORSAL 2 hours
STROBE 200 FRONT
160 DORSAL 1.5 hours
*Thermal protection circuit will automatically reduce the Dorsal Light to low mode when the Front Light is
on high mode. The battery life for this setup is 1 hour.
OPERATIONAL MODES
WARNINGS:
Unplug the light once charged to avoid impacting battery life.
If battery is fully discharged because the unit may have not been in use for
many months, please charge fully.
CHARGING THE BATTERY
Connect the provided USB-C Cable to the Charging Port, and to a USB
port.
While charging, a red light will be on. Once charged, it will turn to green.
Charge time should be approximately 1.5 hours.
BATTERY

6
OPERATIONAL MODES
Press the Dorsal Light Power/Mode Switch once to turn the Dorsal Light
on to HIGH.
Press the Dorsal Light Power/Mode Switch again to turn the Dorsal Light
to LOW.
Press the Dorsal Light Power/Mode Switch again to turn the Dorsal Light
to STROBE.
Press the Dorsal Light Power/Mode Switch again to turn the Dorsal Light
OFF.
Do the same with the Front Light Power/Mode Switch to control the Front
Light.
INSTALLATION
Install Saddle Mount©on X2.
Slide the Saddle Mount©over the X2 and make sure that the two slots on
the inside of the saddle snap onto the associated feature of the X2.
1

7
2Install D3060 to Saddle.
Align the 360° swivel with snap lock location on the desired mount location
of the saddle, and snap D3060 light in place. Spin the light and tug to
make sure it is properly attached. (Images below show D3060 installed on
the top Snap Lock location. There are 4 locations where D3060 can be
installed.)

8
PRODUCT DURABILITY
PRODUCT NAME & PART NUMBER:
D3060-TC 2 Light System for Skydio X2,
700-320
D3060-TC 4 Light System for Skydio X2,
700-321
CARE/CLEANING
Your FoxFury product is a professional
tool. Regular maintenance and care of
your light will maximize performance for
you. As needed, wash your FoxFury
product using a soft washcloth, clean
water and a mild soap. Be sure that
both the Light Head and Power Pack
are reassembled securely before
washing. When done, pat dry with a
damp cloth.
WARNINGS
FoxFury, LLC is not responsible for the
incorrect use of any FoxFury Lighting
product.
Lights are strong enough to cause
damage to the human eye.
Do not stare into LEDs for long
periods of time or from a close
range (less than 2 ft / 0.6 m).
FoxFury, LLC is not responsible
for any injury or damage caused
during the use of this product.
Usage of this product must be
supervised by an adult when it is
being used by a minor.
Any FoxFury product should
be operated at speeds safe
enough to maneuver around
surrounding obstacles.
Do not use under the influence
of drugs or alcohol.
ONE YEAR WARRANTY
FoxFury, LLC (“FoxFury”) warrants
this product to be free from defects
in material for one year after
purchase. LiPo batteries have a one
year pro-rated or 300 re-charge cycle
pro-rated warranty, whichever the
user reaches first.
This warranty is given only to the
original end user of the accompanying
product. If you purchased a product
from someone other than an
authorized FoxFury reseller/distributor
or if the product was used, (including
but not limited to demo models, show
models or refurbished product by
someone other than FoxFury) prior
to your purchase, you are not the
Original Purchaser and the product
that you purchased is not covered by
this warranty. This warranty is VOID
if this Product has been altered or
modified in any way (including but not
limited to attempted warranty repair
without authorization from Foxfury
and/or alteration/removal of the
serial number). To expedite warranty
concerns, we encourage the end user
to register their FoxFury Product at
www.foxfury.com/pages/warranty-
registration.
WARRANTY AND OTHER
INFORMATION
3 M
3 M
IPX6

9
THIS IS THE ONLY WARRANTY,
EXPRESSED OR IMPLIED,
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES ARE
EXPRESSLY DISCLAIMED EXCEPT
WHERE SUCH LIMITATION IS
PROHIBITED BY LAW.
You may have other specific legal
rights which vary by jurisdiction. Go
to www.foxfury.com/pages/warranty
for a complete copy of the warranty.
Retain your receipt for proof of
purchase.
CONTACT FOXFURY
FoxFury, LLC
Oceanside, CA 92056 USA
Tel: [phone]
Email: [e-mail]
Web: FoxFury.com
All FoxFury products are designed in
Oceanside, CA. All FoxFury products
are manufactured with the highest
quality USA and foreign parts.
Products are assembled in either
FoxFury’s controlled plant in Asia or
the USA, under strict quality control.
CALIFORNIA
PROPOSITION 65
This product can expose you to
chemicals including Lead and DEHP,
which are known to the State of
California to cause cancer and
birth defects or other reproductive
harm. For more information go to
www.P65Warnings.ca.gov.

FOXFURY.COM 06/2022