3. Battery shutdow
until all four green LEDs light up, accompanied by a"beep" from the buzzer
to indicate that the startup process has begun. Release the button, and
the buzzer will make along "beep" for 1second, followed by LED indicators
showing the current battery level. The battery is now turned on and ready
for
----------------------------------------------------------------
5
----------------------------------------------------------------
use.
n
Note: ●and ● indicate that the light is always on; ⊙indicates that the light is flashing;
●indicates that the light is off
When the battery is fully charged, all four battery level indicator LEDs will turn
green.The battery level indicators during the charging process are as
Connect the battery interface to the charging port of the matching
charger. Once communication is established between the two, the charger
will begin normal charging of the battery, and the LED will turn yellow to
indicate the current battery
To turn off the battery from the startup mode, first, short press the button,
and then, within 3seconds, press and hold the button until all four green LEDs
turn off one by one, accompanied by a"beep" from the buzzer to indicate that the
shutdown process has begun. Release the button, and the buzzer will make another
"beep" to indicate that the shutdown is complete.
4. Charging instructions
level.
follows:
;
⚠Warning:
1. Ｔｈｉｓ ｂａｔｔｅｒｙ ｉｓ ａ ｓｐｅｃｉａｌｉｚｅｄ ｂａｔｔｅｒｙ ｆｏｒ ｕｎｍａｎｎｅｄ ａｅｒｉａｌ ｖｅｈｉｃｌｅｓ ａｎｄ ｄ
ｏｅｓ ｎｏｔ ｈａｖｅ ａｎｙ ｃｈａｒｇｉｎｇ ｐｒｏｔｅｃｔｉｏｎ ｆｕｎｃｔｉｏｎｓ ｓｕｃｈ ａｓ ｏｖｅｒｃｈａｒｇｉｎｇ ｐｒｏｔｅｃｔｉ
ｏｎ， ｏｖｅｒｃｕｒｒｅｎｔ ｐｒｏｔｅｃｔｉｏｎ， ａｎｄ ｃｈａｒｇｉｎｇ ｔｅｍｐｅｒａｔｕｒｅ ｐｒｏｔｅｃｔｉｏｎ． Ｔｈｅ ｃｈａｒｇｉｎ
ｇ ｓａｆｅｔｙ ｏｆ ｔｈｅ ｂａｔｔｅｒｙ ｉｓ ａｃｈｉｅｖｅｄ ｔｈｒｏｕｇｈ ｔｈｅ ｕｓｅ ｏｆ ａ ｍａｔｃｈｉｎｇ ｃｈａｒｇｅｒ．
LED1 LED2 LED3 LED4 Current power
⊙● ● ● 0% to 12%
●● ● ● 13% to 25%
● ⊙ ● ● 26% to 37%
● ● ● ● 38% to 50%
● ● ⊙ ●51% to 62%
● ● ● ●63% to 75%
● ● ● ⊙ 76% to 87%
● ● ● ● 88% to 100%
● ● ● ● Charging completed
