Fruity Chutes Skycat Drone Parachute User manual

PROFESSIONAL
AEROSPACE
RECOVERY SOLUTIONS
FRUITY CHUTES
Thank you for buying the Skycat Parachute
Launcher Bundle. These resources are on our
website. Here are direct links to help you get
started!
WARNING: Be sure to go through each section
carefully. Let us know if you have questions. In the
event of an emergency, an improperly rigged parachute
can result in a crashed drone.
Skycat Drone Parachute Quick Start Guide
1. Complete the Trigger Board
Assembly – Do this after you
have assembled the mount so
you can trim the wires to the
optimal length. Soldering is
required: http://bit.ly/2BEcVP1
2. Make the Skycat FUSE Links -
You will need the FUSE links
before you can pack and load
the parachute:
http://bit.ly/2nmTxSf
3. Pack and Load the Parachute
in the Skycat Canister:
http://bit.ly/2Gx2qAP
Fruity Chutes Inc. Monte Sereno, CA, USA
https://fruitychutes.com

Skycat Drone Parachute Quick Start Guide (cont.)
PROFESSIONAL
AEROSPACE
RECOVERY SOLUTIONS
FRUITY CHUTES
4. Using the SATS-MINI failsafe:
http://bit.ly/32su0ce
Note: Unless otherwise indicated, SATS-MINI is
shipped preconfigured for the Skycat
parachute trigger board. You will need to
download and install the Windows UI program
“Shooty Chute.” This lets you tune the settings
as well as download and manage the black
box flight log. IMPORTANT: The SATS-MINI
needs to be calibrated for the mounting
orientation on the drone. The Shooty Chute
app can do this.
Fruity Chutes Inc. Monte Sereno, CA, USA
https://fruitychutes.com
Be sure to ground test your setup!
If you have any questions,
please contact us at Fruity
Chutes: http://bit.ly/2DLVz4G
5. Optional Product - Using the
Skycat Rescue Radio:
http://bit.ly/326s8Lu