Fruity Chutes Skycat Inspire 2 Bundle User manual

PROFESSIONAL
AEROSPACE
RECOVERY SOLUTIONS
FRUITY CHUTES
Thank you for buying the Skycat Parachute
Launcher bundle for the Inspire 2. These
resources are on our website. Here are direct
links to help you get started!
WARNING: Be sure to go through each section
carefully. Let us know if you have questions. In the
event of an emergency, an improperly rigged parachute
can result in a crashed drone.
Skycat Inspire 2 Bundle Quick Start Guide
Skycat Inspire 2 Help:1.
http://bit.ly/2nu0n7Y
3. Complete the Trigger Board
Assembly - Do this after you
have assembled the mount so
you can trim the wires to the
optimal length. Soldering is
required: http://bit.ly/2BEcVP1
2. Assemble the I2 Mounting
Bracket: http://bit.ly/2A92ibr
4. Make the Skycat FUSE Links -
You will need the FUSE links
before you can pack and load
the parachute:
http://bit.ly/2nmTxSf
5. Pack and Load the Parachute
in the X48 Canister:
http://bit.ly/2Gx2qAP

Skycat Inspire 2 Bundle Quick Start Guide (cont.)
PROFESSIONAL
AEROSPACE
RECOVERY SOLUTIONS
FRUITY CHUTES
6. Install on Your Inspire 2
Copter: http://bit.ly/2ns4d1g
7. Using the SATS-MINI failsafe:
http://bit.ly/32su0ce
8. Optional Product - Using the
Skycat Rescue Radio:
http://bit.ly/326s8Lu
Note: Unless otherwise indicated, SATS-MINI
are shipped preconfigured for the Inspire 2. No
setup or software upgrades are needed. We do
recommend downloading and installing the
Windows UI program “Shooty Chute.” This lets you
tune the settings as well as download and manage
the black box flight log.
If you have any questions,
please contact us at Fruity
Chutes: http://bit.ly/2DLVz4G
Fruity Chutes Inc. Monte Sereno, CA, USA
https://fruitychutes.com
Be sure to ground test your setup!