Funnelback iTAG User manual

iTAG User Manual
iTag helps you locate items, such as keys, by connecting to the cTracing app on your smartphone through
Bluetooth. It has several functions such as an anti-lost function, and remote camera shutter control. The
eective distance of iTag is 75 Feet in open range without barrier.
Download the app
• Before using iTAG, please download the application and read the instructions carefully.
• Search for ‘cTracing’ in the app store or Google market to download the app.
Switch on/o
• Switch on: Press and hold the button on iTag for 3 seconds until you hear the Beep twice
• Switch o: Press and hold the button on iTag for 3 seconds until the long “Beep” sound.
Connect and disconnect
1. Turn on the iTag device and tap the ““ button to nd more connectable iTag devices.
2. Press the “Connect” button to connect your iTag to the app. If it shows “disconnected”, please tap the
“Connect” button to connect it again.
3. After successfully connection your iTag, you can swipe and press “Delete” to remove iTag devices from
the list.
How to nd things
Tap the button to manage your device.
1. Tap “Name” to change the name for your device, e.g. ‘keys’, ‘car’, ‘handbag’ etc.
2. Tap “Search device” to nd the device, tap it again to stop it.
3. Tap “Disconnect” to disconnect the device.
4. The distance can be adjusted from near to far.
5. Click the button on your iTag device twice rapidly to nd your cellphone or tablet which is connected
to the device.
6. Toggle the “Alarm Switch” button to stop the alarm.

Remote Shutter Control
Go back to the home screen.
1. Press the “Camera” button in the top left corner to access the camera.
2. You can adjust camera settings from here.
3. Press the button on iTag once, it works as a remote shutter to take photos.
Location
Location list: You can mark the location of your iTag on the map by pressing the button on iTag. The
message “Location Success” will pop up. You will nd the marked location in the location list.
Lost history: If the iTag is lost, a pin-drop will be marked automatically on the map to tell you where it was
last located. Go to “lost history” to nd the record.
Battery replacement
The battery is in the back of the tag. Use a coin as a key and twist it to right to open the battery cover, then
replace the battery. A replacement for the CR2032 cell is easy to get. After replacement put the cover back
and close it to the left with the coin.
Supported phones
iOS: Bluetooth 4.0, iOS 7.0 and above. iPhone $S and above, iPad, iPad mini, iPad touch.
Android: Bluetooth 4.0, Android 4.3 and above. Samsung S4,S5, Xiaomi 2/3/4 and other Android phones.