Furrion FAN17B83 User manual

LTE WiFi Router
Routeur WiFi LTE
Enrutador WiFi LTE
Instruction Manual
Manuel d’instructions
Manual de instrucciones
Model/Modèle/Modelo: FAN17B83

Thank you for purchasing the Furrion®LTE WiFi Router. Before operating your new
product, please read these instructions carefully. This will ensure safe use and
reduce the risk of injury. This instruction manual contains information for installation,
maintenance of the product and safe use.
Please keep this instruction manual in a safe place for future reference. Be sure to
pass on this manual to any new owners of this product.
The manufacturer does not accept responsibility for any damages due to not
observing these instructions.
If you have any questions regarding our products, please contact us at:
supportfurrion.com
1
English
Welcome

Welcome ............................................................................................1
Contents ............................................................................................2
About your Product............................................................................3
Product Features.....................................................................................................3
FCC Statements ......................................................................................................3
Product Overview ..............................................................................4
LED Indication....................................................................................5
Installation ........................................................................................6
What’s in the box.....................................................................................................6
Slide-in the LTE WiFi Router...................................................................................6
Device Preparation ............................................................................7
Material Preparation...............................................................................................7
Furrion Network Service Activation........................................................................7
Device Configuration..........................................................................8
Power on your Device..............................................................................................8
Connecting to the Device ........................................................................................8
Login........................................................................................................................8
System Icon Definition ............................................................................................9
Quick Setup your Device .........................................................................................9
Advance Setting.......................................................................................................10
Maintenance ......................................................................................11
Power off your Device .............................................................................................11
Reset your Device....................................................................................................11
Specifications ....................................................................................12
Troubleshooting.................................................................................12
Warranty............................................................................................13
2
English
Contents

Furrion LTE WiFi Router supports LTE Band 2/4/13. Popular operating systems such
as Windows, Linux and Mac, and smart devices like IOS and Android are compatible
with this product.
This device is ready for the Furrion network. Once you have installed the device, turn
on the power and after few minutes the router should attach itself to the LTE network
as default. It is as simple as that. Please read this manual when using Furrion LTE
WiFi router for the first time.
Product Features
●Slide-in Design - Easy Installation
●Furrion Network Ready
●Online Top-up through Furrion APP, Web and call center
●Web/APP for configuration
●Auto detect web login/security check
●WPS supported
●Emergency and roadside assistance support
FCC Statements
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
−Reorient or relocate the receiving antenna.
−Increase the separation between the equipment and receiver.
−Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
−Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or transmitter.
3
English
About your Product

Power Button
USB Port
(not shown)
Reset Button
WPS/Status
Button
Button Description
Power Button
●In OFF mode, press and hold the POWER button for about 4 seconds to turn on
the device. The Signal Indicator LED will be illuminated for about 5 seconds and
then off.
●In ON mode, press and hold the POWER button for about 4 second to turn off the
device.
WPS/Status
Button
●Press and hold the WPS/STATUS button for 5 seconds to turn on the WPS
function. Default setting is 2.4G WiFi, users can set to 5G WiFi via UI.
●Short press the WPS/STATUS button to view the network signal strength. The
Signal Indicator LED will be illuminated for about 20 seconds and the number of
lit bars indicates the signal strength.
NOTE: You may check the signal strength by turning on the Status LED via UI.
The Signal Indicator LED will be kept illuminated unless you turn off the Status
LED in UI.
Reset Button
●Press and hold the RESET button for 5 seconds to reset the device to factory
default settings. All the LEDs blink 3 times indicates you have reset the device
successfully.
●Short press the RESET button to restart the device.
4
English
Product Overview

Signal Indicator
Network Status
LED (Green)
Reset Button
Account Status
Warning
WPS/Status
Button
Power Button
Internet Source Condition Indication
LTE
Account at no
balance/not
activated
●Signal Indicator normal, white LED normal.
●Red LED always ON, until account is setup and
prepaid.
NOTE: It will warn you when your account
balance is low or empty.
Network ready
●Signal Indicator normal, refer to network
signal strength.
●Green LED ON.
No LTE networks ●Signal Indicator OFF.
●Green LED blinking once per second.
External WiFi
WiFi Network
connected and
Internet ready
●Signal Indicator all ON.
●Green LED OFF.
●Red LED off (even when at no balance).
No valid WiFi
connected or
Internet not ready
●Signal Indicator all ON and blinking once per
second.
●Green LED OFF.
●Red LED OFF (even when at no balance).
5
English
LED Indication

What’s in the box
Make sure you have the following items
included in the packaging. If any items
are damaged or missing, contact your
dealer.
●LTE WiFi Router x 1
●Device Identity Sticker x 1
●Warranty Card x 1
●Instruction Manual x 1
Slide-in the LTE WiFi Router
This LTE WiFi Router is designed for
using with Furrion rooftop antenna only.
Refer to the separate Furrion outdoor
antenna instruction manual about how to
install it onto the RV rooftop.
NOTE: A Furrion Rooftop Antenna with
mounting bracket (sold separately,
part#FAN73B7C) should already have
been installed on your RV rooftop. If not,
contact your RV dealer or visit www.
furrion.com to purchase it.
2” (50mm) Min.
2” (50mm) Min.
2” (50mm) Min.
7” (178mm) Min.
1. Pull to remove the cover attached
over the existing Ceiling Mount
Bracket. (Fig. 1)
RV Ceiling
Fig. 1
2. Slide the LTE WiFi Router into the
existing Ceiling Mount Bracket.
(Fig. 2)
RV Ceiling
Fig. 2
3. Your LTE WiFi Router is now fully
installed onto the RV ceiling.
6
English
Installation

This device is ready for the Furrion
network, simply slide the device into the
ceiling mount bracket. For first time use,
you are required to activate the Furrion
Network Service online, which allows
you to access the best LTE network
coverage in North America.
Material Preparation
The device’s ICCID and IMEI numbers
can be found on the warranty card, the
device identity sticker or the rating label.
Before activating your device, make sure
you have one of the materials prepared
for the activation.
Furrion Network Service
Activation
There are 3 methods for you to activate
the device.
●Method 1 - Use your PC or a smart
device, such as a smart phone,
tablet, etc. to visit www.access.
furrion.com. You may also scan the
QR code on the label of the device.
The online instructions will guide you
to complete the activation process.
●Method 2 - Call Furrion Customer
Service hotline for support.
Please have the Warranty Card of the
device or the Device Identity Sticker
included in the package on hand.
●Method 3 - Through the Furrion
Access for activation.
NOTE: You are required to have
access to the Internet via an external
WiFi network. Otherwise, please use
either Method 1 or Method 2.
Follow the “Device Configuration”
section for activation information.
7
English
Device Preparation

Power on your Device
Turn on the power connected to the
ceiling mount bracket. The LTE WiFi
Router will be turned on automatically
upon receiving power.
NOTE: You may login to the device
software and disable the auto power on
feature in the configuration software.
The default setting is Enabled.
If the device is turned off, press and hold
the POWER button on top of the device
for about 4 seconds to turn it on.
Connecting to the Device
Your LTE WiFi Router supports auto-
switch between 4G LTE and External
WiFi. One of the following two methods
can be chosen to link your LTE WiFi
Router with a PC or any other smart
devices which can access to the internet:
WiFi Connection
1. Scan for wireless networks on your
mobile device or laptop. It may take
a few minutes for the network to
appear.
2. Select Local WiFi network with
SSID: FURRIONAP_xxxxxx
Password: FAxxxxxx
The “xxxxxx” in the example above
corresponds to the last 6 characters
of the unique network ID address.
The default password can be found on
the SSID/WPA sticker.
3. Click Join.
LAN Connection
Depending on your RV dealer, you can
connect the Furrion Access through the
assigned Ethernet Socket.
Login
The default IP of this 4G LTE WiFi Router
is 192.168.0.1 with subnet 255.255.255.0.
Make sure the PC attached to this
router is in the same subnet and has
an IP address in the range between
192.168.0.2~ 192.168.0.254.
1. Launch a web browser and enter
192.168.0.1 in the address bar, the
login window will pop up.
2. Enter the default username: admin
and password: admin.
3. Click Login.
8
English
Device Configuration

System Icon Definition
Reboot the system.
Click to logout of the
system.
Click for quick setup of
your system.
Indicates the signal
strength.
Quick Setup your Device
Change Administration Password
After a successful login, the following
screen will appear and you will be
required to setup a new password
for the “admin” account for device
management.
Username: Show the current username.
New Password: You can enter 1-32
characters as your new password.
Confirm Password: Enter the new
password again.
Click Next to go on to the next step.
WAN Connection Setup
Select WiFi, in order to access the
Furrion network activation. The
following screen will appear after
clicking the Next button and will allow
you to configure the WiFi settings.
LTE: For internet service through the
LTE network.
Ext WiFi: For internet service through
the public WiFi network.
Click Next to go on to the next step.
Wireless Connection Setup
The following screen will appear after
clicking the Next button and will allow
you to configure the WiFi settings.
Network Name SSID: To identify your
wireless network, a network name called
SSID (Service Set Identifier) is used. You
can change to any name you preferred.
NOTE: Make sure that your SSID is
unique if there are other wireless
networks operating in your area.
Security Mode: Select a mode of
Disabled, WPA-PSK, WPA2-PSK or WPA-
PSK/WPA2-PSK
WPA Algorithms: TKIP, AES
9
English
Device Configuration

Password: 1~32 characters
Save Confirmation Settings
Click “Next” and “Finish” to save and
complete the quick setup.
A new window will pop up indicating you
have successfully configured the system.
Click OK.
OK
You should now be able to access the
internet after the device configuration is
complete. Go to https://access.furrion.
com to follow the Furrion network
activation process.
Advance Setting
Click the “Advance Setting” button to
activate the advance setting page. You
are now allowed to configure the settings
of WAN, LAN, WiFi, Firewall and etc.
10
English
Device Configuration

Power off your Device
NOTE: Be careful the device might be
hot after operating for a long time.
You may choose one of the following
two methods to turn off the 4G LTE WiFi
Router.
Method 1:
Press and hold the POWER button on
top of the LTE WiFi Router for about 4
seconds. The Network Status LED and
Account Status warning LED will flash
for two seconds and then turn off. The
device will be turned off.
Method 2:
After successful login into the software
(see “Login” section about how to login),
click button to restart the LTE WiFi
Router.
NOTE: It is recommended to wait 30
seconds before turning on the LTE WiFi
Router after it is powered off.
Reset your Device
To restore the LTE WiFi Router to factory
default settings, press and hold the
RESET button using a sharp object for
about 10 seconds then release. The LED
will flash 3 times then disappear. A short
press of the RESET button will restart
the device.
11
English
Maintenance

This product is restricted to indoor use due to its operation in the 5150-5250MHz
frequency range.
Technical Specifications
OPERATING CONDITIONS
FREQUENCY RANGE WIFI
2412MHz to 2462MHz (802.11b/g/n (HT20))
2422MHz to 2452MHz (802.11n (HT40)
5180MHz-5240MHz (802.11a/n/ac)
5475MHz-5825MHz (802.11a/n/ac )
SUPPORTED SYSTEMS Wi-Fi (LAN): 802.11a/b/g/n/ac
LTE: B2/B4/B13
ANTENNA GAIN
INTERNAL LAN WIFI 2dBi
INTERNAL GPS/GLONASS 2dBi
TX POWER WIFI WAN / LAN
2.4G WiFi: 17.78dBm (max.)
5G WiFi 13.90dBm (max.)
LTE: 23dBm (max.)
WIFI ROUTER >400ft with >10Mbps throughput
POWER RATING Typical: 12Vdc @ 500mA, Peak 1A
OPERATION TEMPERATURE -20°C to 55°C / -4°F to 131°F
1. None of the LEDs are on when you turn on the router
Make sure you have power to the LTE WiFi Router.
Check the connection between the adapter and the LTE WiFi Router. If the error
persists, you may have a hardware problem. In this case you should contact
technical support.
2. You have forgotten your router login and/or password
Try the default login and password, found in the “Login” section in page 9. If this
fails, you can restore your router to its factory settings by pressing and holding the
Reset button on top of your router for 10 seconds or more. You will be able to use
the default login and password after the factory reset.
3. Can’t get access to Internet
Check the external LTE access status and WiFi connection. Alternatively, your
Furrion Network Service account may have insufficient data balance.
12
English
Specifications
Troubleshooting

FURRION WARRANTS FOR A PERIOD OF 1 YEAR FROM DATE OF RETAIL PURCHASE
BY THE ORIGINAL ENDUSE PURCHASER, THAT THIS PRODUCT, WHEN DELIVERED
TO YOU IN NEW CONDITION, IN ORIGINAL PACKAGING, FROM A FURRION
AUTHORIZED RESELLER AND USED IN NORMAL CONDITIONS, IS FREE FROM
ANY DEFECTS IN MANUFACTURING, MATERIALS, AND WORKMANSHIP. IN CASE
OF SUCH DEFECT, FURRION SHALL REPLACE OR REPAIR THE PRODUCT AT NO
CHARGE TO YOU. THIS WARRANTY DOES NOT COVER: PRODUCTS WHERE THE
ORIGINAL SERIAL NUMBERS HAVE BEEN REMOVED, ALTERED OR CANNOT
READILY BE DETERMINED; DAMAGE OR LOSS CAUSED BY ACCIDENT, MISUSE,
ABUSE, NEGLECT, PRODUCT MODIFICATION, FAILURE TO FOLLOW INSTRUCTIONS
IN INSTRUCTION MANUAL, COMMERCIAL OR INDUSTRIAL USE; DAMAGE OR LOSS
CAUSED TO THE DECORATIVE SURFACE OF PRODUCT; TO ANY DATA, SOFTWARE OR
INFORMATION; AND NORMAL WEAR AND TEAR. THIS WARRANTY ONLY PROTECTS
THE ORIGINAL ENDUSER (“YOU”) AND IS NOT TRANSFERABLE; ANY ATTEMPT TO
TRANSFER THIS WARRANTY SHALL MAKE IT IMMEDIATELY VOID. THIS WARRANTY
IS ONLY VALID IN THE COUNTRY OF PURCHASE.
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER
ORAL OR WRITTEN, EXPRESS OR IMPLIED. FURRION SPECIFICALLY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IF FURRION CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS
LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY.
No Furrion reseller, agent, or employee is authorized to make any modification,
extension, or addition to this warranty.
13
English
Warranty

FURRION IS NOT RESPONSIBLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED
TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF
ANY EQUIPMENT OR PROPERTY, ANY COSTS OF RECOVERING, REPROGRAMMING,
OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH FURRION
PRODUCTS. FURRION’S TOTAL LIABILITY IS LIMITED TO THE REPAIR OR
REPLACEMENT OF THIS PRODUCT PURSUANT TO THE TERMS OF THIS WARRANTY.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR EXCLUSIONS OR LIMITATIONS ON THE DURATION
OF IMPLIED WARRANTIES OR CONDITIONS, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY STATE OR (WHERE
APPLICABLE IN THE COUNTRIES WHERE FURRION HAS NON-US/CANADIAN
AUTHORIZED DEALERS) COUNTRY. NO ACTION OR CLAIM TO ENFORCE THIS
WARRANTY SHALL BE COMMENCED AFTER THE EXPIRATION OF THE WARRANTY
PERIOD.
Keep your receipt, delivery slip, or other appropriate payment record to establish the
warranty period. Service under this warranty must be obtained by contacting Furrion
at [email protected]om
Product features or specifications as described or illustrated are subject to change
without notice.
14
English
Warranty

Merci d’avoir acheté le routeur WiFi Furrion®LTE. Avant d’utiliser votre nouveau
produit, veuillez lire ces instructions attentivement. Vous serez ainsi assuré d’utiliser
ce produit de manière sécuritaire tout en réduisant les risques de blessures. Ce
manuel d’instructions contient des renseignements portant sur l’installation,
l’entretien du produit et son utilisation sécuritaire.
Veuillez conserver ces instructions en lieu sûr pour pouvoir les consulter
ultérieurement. N’oubliez pas de remettre ce manuel à tout nouveau propriétaire de
ce produit.
Le fabricant n’accepte aucune responsabilité quant aux dommages causés à la suite
du non-respect de ces instructions.
Pour toute question sur nos produits, veuillez communiquer avec nous à l’adresse:
[email protected]
15
Français
Bienvenue

Bienvenue..........................................................................................15
Contenu .............................................................................................16
À propos de votre produit ..................................................................17
Caractéristiques du produit ....................................................................................17
Déclarations de la FCC ...........................................................................................17
Présentation du produit.....................................................................18
Indication par DEL .............................................................................19
Installation ........................................................................................20
Contenu de la boîte .................................................................................................20
Insérer le routeur WiFi LTE.....................................................................................20
Préparation de l’appareil...................................................................21
Préparation du matériel..........................................................................................21
Activation du service de réseau Furrion.................................................................21
Configuration de l’appareil ...............................................................22
Allumez votre appareil............................................................................................22
Connexion à l’appareil.............................................................................................22
S’identifier...............................................................................................................22
Définition des icônes du système ...........................................................................23
Configuration rapide de votre appareil...................................................................23
Paramétrage avancé...............................................................................................24
Entretien............................................................................................25
Éteignez votre appareil ...........................................................................................25
Réinitialiser votre appareil......................................................................................25
Caractéristiques ................................................................................26
Dépannage.........................................................................................26
Garantie.............................................................................................27
16
Français
Contenu

Le routeur WiFi Furrion LTE prend
en charge les bandes 2/4/13 LTE.
Les systèmes d’exploitation les plus
répandus, tels que Windows, Linux et
Mac, ainsi que les appareils intelligents
tels que IOS et Android sont compatibles
avec ce produit.
Cet appareil est prêt pour le réseau
Furrion. Une fois que vous avez installé
le périphérique, allumez-le et après
quelques minutes, le routeur devrait
se connecter au réseau LTE par défaut.
C’est aussi simple que ça. Veuillez lire ce
manuel lorsque vous utilisez le routeur
WiFi Furrion LTE pour la première fois.
Caractéristiques du produit
●Modèle coulissant - Installation facile
●Prêt pour le réseau Furrion
●Rechargement en ligne au moyen de
l’application Furrion, du Web et du
centre d’appels
●Web/application pour la configuration
●Détection automatique de connexion
Web/contrôle de sécurité
●WPS pris en charge
●Assistance d’urgence et assistance
routière
Déclarations de la FCC
Les changements ou modifications non
expressément approuvés par la partie
responsable de la conformité pourraient
annuler l’autorité de l’utilisateur à
utiliser l’équipement.
Cet équipement a été testé et déclaré
conforme aux limites d’un appareil
numérique de classe B, conformément
à la partie 15des règles de la FCC.
Ces limites sont conçues pour fournir
une protection raisonnable contre
les interférences nuisibles dans
une installation résidentielle. Cet
équipement génère, utilise et peut
émettre de l’énergie radiofréquence
et, s’il n’est pas installé et utilisé
conformément aux instructions, peut
causer des interférences nuisibles aux
communications radio. Cependant, il n’y
a aucune garantie que des interférences
ne se produiront pas dans une
installation particulière.
Si cet équipement cause des
interférences nuisibles à la réception
radio ou télévision, ce qui peut être
déterminé en éteignant et en rallumant
l’équipement, l’utilisateur est encouragé
à essayer de corriger l’interférence
par une ou plusieurs des mesures
suivantes:
−Réorienter ou déplacer l’antenne de
réception.
−Augmentez la distance entre
l’équipement et le récepteur.
−Connectez l’équipement à une prise
sur un circuit différent de celui
auquel le récepteur est connecté.
−Consulter le revendeur ou un
technicien radio/TV expérimenté
pour obtenir de l’aide.
Cet équipement est conforme aux
limites d’exposition aux radiations de
la FCC définies pour un environnement
non contrôlé. Cet équipement doit être
installé et utilisé avec une distance
minimale de 20 cm entre l’élément
rayonnant et votre corps. Cet émetteur
ne doit pas être situé ou fonctionner
conjointement avec une autre antenne
ou un autre émetteur.
17
Français
À propos de votre produit

Bouton d'ali-
mentation
Port USB
(non illustré)
Bouton de
réinitialisation
Bouton
WPS/État
Bouton Description
Bouton
d’alimentation
●En mode arrêt (OFF), appuyez sur le bouton POWER (alimentation) et maintenez-
le enfoncé pendant environ 4secondes pour allumer l’appareil. Le voyant à DEL
du signal s’allumera pendant environ 5secondes, puis s’éteindra.
●En mode marche (ON), appuyez sur le bouton POWER (alimentation) et
maintenez-le enfoncé pendant environ 4secondes pour éteindre l’appareil.
Bouton WPS/État
●Appuyez sur le bouton d’état WPS/STATUS (WPS/État) pendant 5secondes pour
activer la fonction WPS. Le réglage par défaut est 2.4G WiFi; les utilisateurs
peuvent définir 5G WiFi au moyen de l’interface utilisateur.
●Appuyez brièvement sur le bouton WPS/STATUS (WPS/État) pour afficher la
force du signal réseau. La DEL de l’indicateur de signal s’allume pendant environ
20secondes et le nombre de barres allumées indique la puissance du signal.
REMARQUE: Vous pouvez vérifier la force du signal en allumant le voyant
d’état au moyen de l’interface utilisateur. La DEL de l’indicateur de signal reste
allumée à moins que vous ne désactiviez la DEL Status (état) dans l’interface
utilisateur.
Bouton de
réinitialisation
●Appuyez sur le bouton RESET (réinitialiser) et maintenez-le enfoncé pendant
5secondes pour réinitialiser l’appareil aux paramètres par défaut. Tous les
voyants clignotent 3fois pour indiquer que vous avez réinitialisé l’appareil avec
succès.
●Appuyez brièvement sur le bouton RESET (réinitialiser) pour redémarrer
l’appareil.
18
Français
Présentation du produit

Indicateur de signal
DEL d'état du
réseau (vert)
Bouton de
réinitialisation
Avertissement
sur l'état du
compte
Bouton
WPS/État
Bouton
d'alimentation
Source Internet État Indication
LTE
Compte sans solde/
non activé
●Indicateur de signal normal, DEL blanche
normale.
●DEL rouge toujours allumée, jusqu’à ce que le
compte soit configuré et prépayé.
REMARQUE: Elle vous avertira si le solde de
votre compte est faible ou vide.
Réseau prêt
●Indicateur de signal normal, se réfère à la
puissance du signal réseau.
●DEL verte allumée.
Pas de réseaux LTE ●Indicateur de signal ÉTEINT.
●La DEL verte clignote une fois par seconde.
WiFi externe
Réseau WiFi
connecté et prêt
pour Internet.
●Indicateur de signal toujours ALLUMÉ.
●DEL verte éteinte.
●DEL rouge éteinte (même sans solde).
Aucun WiFi valide
connecté ou Internet
n’est pas prêt.
●Indicateur de signal allumé et clignotant une
fois par seconde.
●DEL verte ÉTEINTE.
●DEL rouge éteinte (même sans solde).
19
Français
Indication par DEL