Galley Tap IDS 1 User manual

THEGALLEY ™ TA P
Installation Instructions
Stainless Steel Deck Switch
CORPORATE HEADQUARTERS
The Galley, LLC.
12626 South Memorial Drive
Bixby, OK 74008
800.375.4255
thegalley.com
THE GALLEY TAP - LIMITED LIFETIME WARRANTY
1. GALLEY TAP LIMITED LIFETIME MECHANICAL WARRANTY - Seller provides a Limited Lifetime
Mechanical Warranty. Seller warrants its products, installed in a residential application, to be free
from manufacturing defects in materials and workmanship under normal usage for the useful life of
the product. This Limited Lifetime Mechanical Warranty is subject to the warranty conditions and
limitations as set forth below.
2. GALLEY TAP LIMITED LIFETIME FINISH WARRANTY - Seller provides a Limited Lifetime Finish
Warranty. For the following Finishes: Polished Stainless Steel, Matte Stainless Steel, PVD Satin Black
Stainless Steel, PVD Gun Metal Gray™ Stainless Steel, PVD Polished Rose Gold Stainless Steel and PVD
Brushed Gold Stainless Steel, seller warrants its finishes, installed in a residential application, to be free
from manufacturing defects in materials or workmanship for the useful life of the product. Please refer
to the Seller’s Care Instructions for the proper maintenance of Seller’s finishes. This Limited Lifetime
Finish Warranty is subject to the warranty conditions and limitations as set forth below.
3. WARRANTY CONDITIONS AND LIMITATIONS - Seller’s Mechanical and Finish warranties are non-
transferable and are strictly limited to products correctly installed using our installation instructions
and used in a residential environment. Mechanical or finish problems which result from abuse, misuse,
improper installation, improper maintenance, (including not properly winterizing the Tap in outdoor
installations), improper cleaning, proximity to bodies of saltwater, or accidental damage such as scuffs
and scratches are not covered by this warranty. Seller does not assume liability for labor charges,
removal and reinstallation expenses, freight or postage charges, or injuries resulting from a defective
product. This warranty does not allow recovery of incidental or consequential damages such as loss
of use, property damage, or any other consequential damage and Seller accepts no liability for such
damage. Seller does not assume any responsibility other than to repair or replace the defective part(s)
after Seller, upon its examination, has determined the product to be defective and the defective part(s)
are covered by the Limited Lifetime Warranty expressed in this warranty. Whether to repair or replace
the product shall be at the sole election of the Seller. In no event shall the liability of The Galley exceed
the purchase price of the Tap. The use of Plumber’s Putty will void this warranty. A non-corrosive epoxy
silicone sealing compound may be used. Seller hereby disclaims all other warranties, expressed or
implied, other than those set forth in this warranty. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state
to state.
4. WARRANTY CLAIMS - These warranties are in effect for Seller’s Products purchased on January
1st, 2017 and thereafter. For warranty claims, please contact your Galley Dealer, or you may write to:
The Galley, LLC.
Attn: Warranty Claims
12626 South Memorial Drive
Bixby, OK 74008
Please include the original receipt with a description of the problem, model number, store, date of
purchase, your name, address and telephone number.
Model IDS 1
Made in Italy

Made in Italy
TG0817
Made in Italy
TG0818
B
A
C
COUNTERTOP
D E
A. Threaded body
B. Mounting washer
C. Mounting nut
PARTS INCLUDED:
D. Appliance control box
E. Tubing
Slide tubing (E) into tube fitting
at bottom of threaded body (A).
1 3/8” INSTALL
DIAMETER HOLE
Fit threaded body (A) through install hole on
countertop. (No plumbers putty is required.
The O-ring seals the base).
Slide mounting washer (B) and thread the
mounting nut (C) onto threaded body (A).
5
Tighten mounting nut (C)
snuggly to underside of
counter and securely
tighten mounting nut
screws. Slide other end of tubing (E)
into tube fitting at bottom
of appliance control box (D).
Make sure tubing is secure.
The appliance control box connects into any standard household wall receptacle. Plug your garbage
disposal into one of the outlets on the appliance control box. You may use the additional receptacle
with any device that has a max of a 120V, 1HP motor. Do NOT plug your dishwasher into the appliance
control box. Pressing the remote deck switch will alternately activate or deactivate your disposal and
anything else plugged into the appliance control box.
PLUG GARBAGE
DISPOSAL IN HERE
56
2
1
743
2 11/16” MAX
COUNTERTOP
THICKNESS
Ensure Galley logo
on base ring is
facing forward
before tightening.
NOTE:
REQUIRED TOOLS:
#2 Phillips Screwdriver
Model IDS 1