Glacier bay ACS3021A1Q User manual

USE AND CARE GUIDE
APRON FRONT STAINLESS STEEL KITCHEN SINK
Model#ACS3021A1Q
Model#ACS3321A1Q
Model#ACS3621A1Q
Model#ACS3321A2Q
Model#ACS3621A2Q
Model#ACS3021A1Q-F
Model#ACS3321A1Q-F
Model#ACS3621A1Q-F
Model#ACS3321A2Q-F
Model#ACS3621A2Q-F
Model#ACS3022A1Q-W
Model#ACS3322A1Q-W
Model#ACS3622A2Q-W
Model#ACS3322A2Q-W
Model#ACS3622A2Q-W
Model#ACS3022A1Q-FW
Model#ACS3322A1Q-FW
Model#ACS3622A1Q-FW
Model#ACS3322A2Q-FW
Model#ACS3622A2Q-FW
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
THANK YOU
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this kitchen sink. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Glacier Bay!

Table of Contents
Safety Information
Warranty
LIMITED LIFETIME WARRANTY
WARRANTY EXCLUSIONS
OBLIGATION OF THE ORIGINAL OWNER
Undermount Installation2 9
12
2
3
Care and Maintenance
Safety Information
Warranty
Pre-Installation
Before installing this sink, read this instruction manual carefully.
It contains important information concerning the safe installation,
operation, and maintenance of your sink.
Retain this manual for future use. In the event of a sale, transfer,
or relocation, ensure this manual remains with the sink.
NOTICE: Avoid leaving wet sponges, salt, and corrosive substances
on the sink for long periods of time. Lines and scratches may be
caused by improper use of the sink.
NOTICE: Do not place the sink on its side as there is a risk of
damage.
WARNING: Keep all the packaging materials out of the
reach of children to prevent possible choking or suffocation.
WARNING: Use caution when installing the sink. There is
a risk of crushing your ngers when inserting the sink into
the installation location.
CAUTION: Never place hot objects such as hot pans
on the sink. Wait until the object has cooled or use a heat
resistant plate when placing hot objects on the sink surface.
This limited lifetime warranty is extended to the original purchaser of this sink. The manufacturer warrants this sink to be free from all
manufacturing defects in material and workmanship. The manufacturer will repair or replace, at no charge, excluding labor, any sink
that is proven to be defective under normal use. An equivalent replacement will be issued to the original owner provided the defective
sink was installed in accordance with the installation procedures, used and cleaned as recommended, and not damaged due to abuse,
misuse, or negligence. Chips, scratches, and stains are not deemed to be manufacturing defects. The manufacturer will not be held
liable for chips, scratches, and stains that can occur under normal use over a period of time. Please refer to the cleaning instructions
to maintain your sink in its original appearance. The manufacturer shall not be held liable under this warranty where the sink has been
used in a non-domestic application, improperly installed, or damaged from the impact caused by a heavy object being dropped on the
sink of from improper handling.
The manufacturer shall not be liable for any inconvenience or expense for material or labor related to the removal or replacement of a
defective sink or for any loss or damage to any person or property whatsoever resulting from the defective sink. All transportation costs
to and from the point of purchase will be the responsibility of the purchaser.
Excluded are any accessories that accompany the sink (strainer, bottom grid, etc.). The manufacturer guarantees all sink accessories to
be free from manufacturing defects for one year. The manufacturer is not responsible or liable for indirect, special, or consequential
damages arising out of or in connection with the use or performance of its products and its liability under this warranty is limited to the
replacement of the defective material at the location of purchase.
No employee, agent, or other person is authorized to provide any warranty on behalf of The Home Depot for a Glacier Bay product that is in
addition to or different from the warranty stated above unless the warranty has been previously approved by an authorized representative.
This warranty gives you specic legal rights and you may also have other rights which may vary from province to province.
Contact the Customer Service Team at 1-855-HD-GlACIER or visit www.HOMEDEPOT.COME/GLACIERBAY.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. The manufacturer
makes no additional warranties, express or implied, and any implied warranty including that of merchantability or tness for a
particular purpose is limited in its duration to the duration of the written limited warranties set forth herein.
Any sink returned must be in the original packaging and include all the accompanying accessories, parts, and documentation. The
manufacturer reserves the right to inspect any sink reported to be defective prior to replacement of the sink.
2

Pre-Installation
PLANNING INSTALLATION
TOOLS REQUIRED
HARDWARE INCLUDED
Compare all the parts to the Hardware Included and Package Contents lists and verify that all the parts are included. Inspect all the
parts for damage. If there are missing parts or visible damage to the sink, do not install and contact the Customer Service Team at
1-855-HD-GLACIER.
Silicone
sealant
Phillips
screwdriver Hammer
Jigsaw Drill and
drill bit
Safety goggles
NOTE: Hardware is not shown to actual size.
AA
Part
AA 10Mounting clip
Description Quantity
3HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Plumber's putty

4
PACKAGE CONTENTS
Pre-Installation (continued)
Model# Bowls Picture Package Contents
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Sink
. Mounting Hardware
. Strainer x2
. Bottom Grid x2
. Sink
. Mounting Hardware
. Strainer x2
. Bottom Grid x2
Single
Single
Single
Double
Double
ACS3021A1Q
ACS3321A1Q
ACS3621A1Q
ACS3321A2Q
ACS3621A2Q
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.

5
Model# Bowls Picture Package Contents
Single
Single
Single
Double
Double
ACS3021A1Q-F
ACS3321A1Q-F
ACS3621A1Q-F
ACS3321A2Q-F
ACS3621A2Q-F
Pre-Installation (continued)
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Faucet
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Faucet
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Faucet
. Sink
. Mounting Hardware
. Strainer x2
. Bottom Grid x2
. Faucet
. Sink
. Mounting Hardware
. Strainer x2
. Bottom Grid x2
. Faucet
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.

6
Model# Bowls Picture Package Contents
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Roll Mat
. Colander
. Cutting Board
. Towel
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Roll Mat
. Colander
. Cutting Board
. Towel
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Roll Mat
. Colander
. Cutting Board
. Towel
. Sink
. Mounting Hardware
. Strainer X2
. Bottom Grid X2
. Roll Mat
. Colander
. Cutting Board
. Towel
. Sink
. Mounting Hardware
. Strainer X2
. Bottom Grid X2
. Roll Mat
. Colander
. Cutting Board
. Towel
Pre-Installation (continued)
Single
Single
Single
Double
Double
ACS3022A1Q-W
ACS3322A1Q-W
ACS3622A2Q-W
ACS3322A2Q-W
ACS3622A2Q-W
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.

7
Pre-Installation (continued)
Model# Bowls Picture Package Contents
Single
Single
Single
Double
Double
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Roll Mat
. Colander
. Cutting Board
. Towel
. Faucet
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Roll Mat
. Colander
. Cutting Board
. Towel
. Faucet
. Sink
. Mounting Hardware
. Strainer
. Bottom Grid
. Roll Mat
. Colander
. Cutting Board
. Towel
. Faucet
. Sink
. Mounting Hardware
. Strainer x2
. Bottom Grid x2
. Roll Mat
. Colander
. Cutting Board
. Towel
. Faucet
. Sink
. Mounting Hardware
. Strainer x2
. Bottom Grid x2
. Roll Mat
. Colander
. Cutting Board
. Towel
. Faucet
ACS3022A1Q-FW
ACS3322A1Q-FW
ACS3622A1Q-FW
ACS3322A2Q-FW
ACS3622A2Q-FW
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.

8
Pre-Installation (continued)
PACKAGE CONTENTS
A
B
C
D
E
F
G
H
I
J
K
N
L
M
O
Faucet
SinkA
Part Description
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Stainer basket
Stainer bowl
Stainer ring
Paper washer
Rubber washer
Locknut
Plastic joint
Connecting nut
Bottom grid
Roll mat
Colander
Cutting board
Towel
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.

9
Undermount-Installation
Preparing the cabinet Preparing the countertop
Install wood supports (Not included)
Apply painter’s tape to the cabinets for marking and cutting
purposes. This will protect the cabinet from damage while
cutting.
Outline the cutout on the front of the cabinet according to the
actual sink.
OUTLINE FOR APRON
FRONT SINK CUTOUT
Measure the sink apron and the cabinet opening to make sure the
sink apron will t into the cabinet opening. If necessary, sand the
opening or add wood ller strips.
Prepare the cabinet and create a support frame inside the cabinet
that the sink will sit on. Use 2x4 solid wood studs to create the
support frame. Your cabinet and support frame should be strong
enough to hold up to 200 lbs of weight once installed. The support
frame should be positioned so that the top of the sink rim is level
and ush with the top surface of the cabinet perimeter. Make sure
the support frame leaves room for the drains, the faucet water lines,
and the garbage disposal (if any).
Place a thin layer of sealant on the supporting frame where it will
contact the sink.
Due to the various cutout sizes possible (based on your prefer-
ence) a cut-out template is not provided. Use the actual sink
measurement to determine the actual location of the cutout.
Ensure adequate clearance behind the sink for any faucet and
backsplash.
Trace the cut-out opening on the countertop. Cut out the opening
in the countertop. Use an orbital sander or sanding block to smooth
the edge of the cut-out area and remove all the saw marks. For
laminate type countertops, all the exposed unlaminated surfaces
near the cut-out opening must be adequately nished and sealed
to prevent water damage.
Cut two lengths of support framing to extend along the inside
walls on each side of the base cabinet.
NOTICE: It is strongly suggested that you contact a professional
countertop fabricator when installing the sink as an undermount.
NOTICE: The cabinet must be installed, secured, plumber, and
level before installing the sink.
NOTICE: It is recommend to provide the cabinet maker with the
actual sink prior to cabinet fabrication. Before installing the sink, verify
that the distance from the top of the doors to the top of the cabinet is
greater than the apron front.
NOTICE: Double check the measurement of the cabinet cutout
and make any necessary adjustments by either adding ller strips or
sanding the opening.
NOTICE: A custom sink base cabinet and support framing is required
for proper installation.
Construct a support frame to t inside the cabinet opening.
Provide the appropriate clearance for the faucet, the water
supply lines, the drain assembly, the garbage disposal and
the structural parts of the cabinet.
Using a sharp saw blade, carefully cut the cabinet on the
traced line.
1 2
3
Measure and mark the support mounting locations; ensuring the
sink rim will sit at, or slightly below the top edge of the cabinet.
Position and level the supports.
Secure the supports with construction adhesive and screws
(not provided).
Cut four lengths of support framing to extend from the bottom
of the installed supports to the oor of the cabinet.
Secure the vertical supports with construction adhesive and
screws (not provided).
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.

5
10
Undermount-Installation
Installing the sink Installing the countertop
NOTICE: The front sink apron must be secured to the front of the
cabinet by attaching fasteners through the cabinet front and into the
support framing. Failure of the step can lead to product damage.
NOTICE: Metal edges may be sharp - use caution when handling.
NOTICE: The manufacturer is not responsible for the sink or the
countertop if damaged during installation. Be sure to inspect the sink
for damage prior to beginning installation.
Clean the sink apron and top rim of all debris. Ensure that the
surface on the underside of the countertop cutout opening is
smooth and free of debris.
Lower the sink (A) onto the supports and verify the sink is
supported by the frame.
Push the sink in to ensure the apron is ush to the front of the
cabinet.
Verify the sink is level. Make any adjustments and shim as
needed.
Clean the bottom of the countertop and the top ange (or lip) of
the sink with denatured alcohol.
Apply a narrow bead of silicone adhesive sealant (not included)
around the side and back of the sink (A).
Carefully position and secure the sink to the countertop following
the manufacturer’s instructions.
Apply a thin bead of silicone sealant (not included) where the
sink meets the countertop and cabinet.
Immediately remove excess sealant.
Recommended
Clip Placement
Countertop
Silicone caulk
(Not included)
AA
A
A
AA

Maintenance
11
Undermount-Installation
Installing the drain assembly
C
D
E
A
F
G
H
I
J
6
Install the strainer assembly (C-J) as these steps describe. It is
easier to install the strainer assembly (C-J) to the sink (A) before
the sink is installed to the cabinet.
Place the sink (A) into the installation hole to verify the t. Adjust
the cutout if necessary.
Apply a small amount of plumber’s putty (not included) in the notch
around the drain hole of the sink (A). Place the strainer ring (E) on
top of the drain hole in the sink (A).
1)
Put strainer basket (C) into the strainer bowl (D) and place this
assembly into the drain hole in the sink (A).
2)
From underneath the sink (A), place the paper washer (F), rubber
washer (G), locknut (H), plastic joint (I), and connecting nut (J)
under the drain hole in the sink (A).
3)
Tighten the locknut (H) to hold the strainer assembly securely in
place.
4)
Putting on the grid
7
Place the bottom grid (K) into the sink (A).
KA
If you have a double bowl sink, install the assembly and put
on the grid in the same way for the second bowl.

Maintenance
12
Undermount-Installation
Care and Maintenance
Do not use abrasive cleaning creams or powders, concentrated caustic soda, formic acid, or anything highly corrosive. For more
information on removing difcult stains, contact customer service at 1-855-HD-GLACIER or visit your local Home Depot store.
Clean with a sponge or soft dish cloth and gentle sink soap. For stains that are difcult to remove, such as calcium deposits, use
eraser sponges, vinegar-based cleaners, and lime removers.
Rinse the sink with hot water and dry the sink with a soft absorbent cloth.
Fruit juices, coffee, and tea can stain the surface of your sink if not removed. Rinse or wipe the sink promptly after these substances
make contact with the sink.
Never use steam or high-pressure cleaning systems to clean your sink.
Putting on the accessories
(workstation sinks only)
8
For workstation sinks (A), place the cutting board (N), the
colander (M) and the roll mat (L) on the sink (A) or countertop
directly. A
L
N
M

Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
Retain this manual for future use.