Game Winner 158239 User manual

TWO MAN LADDER STAND ACCESSORY KIT
ITEM:158239
Instruction Manual
1
Thank you for your purchase of this quality Game Winner Product! In order to reduce your risk of injury, you
MUST read and thoroughly understand all of the safety warnings, usage instructions and other information
contained within the written and safety video instructions and warnings provided with this product and any
other hunting equipment used. Retain the instructional and warning materials and review them periodically
(at least once a year and always with any new user). Failure to follow all instructions and warnings may lead
to serious injury or death. DO NOT USE THIS PRODUCT UNTIL AND UNLESS YOU HAVE READ AND
THOROUGHLY UNDERSTAND ALL INSTRUCTIONS, SAFETY WARNINGS AND OTHER MATERIALS. If you
have any questions, do not use the product until you have contacted the manufacturer at 949-262-3416 or
email [email protected].
Compatible with 163790, FSGWSF2056 & 158278, not compatible with other
models.
TWO MAN LADDER STAND NOT INCLUDED
Business Hours:
Monday through Friday, 8:00 am to 5:00 pm ET. If you are unable to speak with a
representative, please leave a voicemail with your contact information and your
call will be returned within one (1) business day.
For Customer Service, please call 949-262-3416 or
E-mail: [e-mail]
(Made In China)

Warnings ……………………………………………………………….. 3
Parts List / Tools Required ..............…………………...………...……….. 4
Hardware / Product Diagram ……………………………………................ 5
Assembly & Installation Instructions …………………………………….. 6-7
Care and Maintenance ……………………………………………………. 7
Warranty Information ……………………………………………………… 8
Table of Contents Page
2
Note: Before beginning assembly of product, make sure all parts are
present. Compare parts with package content list and hardware
contents. If any part is missing or damaged do not attempt to
assemble the unit. Contact customer service for replacement parts.

Warnings
3
ATTENTION!
WHEN YOU SEE A SYMBOL OR THE WORD “WARNING!” BE SURE TO READ THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE OR PREVENT
SERIOUS INJURY!! BE SAFE! FOLLOW ALL WARNINGS!!
WARNING! FALLS FROM A TREE STAND CAN OCCUR ANYTIME AFTER LEAVING THE GROUND.
THESE FALLS RESULT IN EITHER SERIOUS INJURY OR DEATH! FOR YOUR PERSONAL
SAFETY, READ THIS PRODUCTION INSTRUCTION MANUAL ALONG WITH TWO MAN LADDER
STAND 163790, FSGWSF2056 & 158278 (INCLUDED WITH LADDER STAND) INSTRUCTION
MANUAL IN ITS ENTIRETY BEFORE ATTEMPTING TO ASSEMBLE, SET-UP, INSTALL AND/OR
OTHERWISE USE THIS GAME WINNER PRODUCT. ANNUALLY REVIEW THE CONTENTS OF THIS
INSTRUCTION MANUAL. ADDITIONALLY, KEEP THESE INSTRUCTIONS FOR THE ENTIRE
DURATION YOU OWN THIS PRODUCT(S). FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULT IN SERIOUS INJURY OR DEATH!
WARNING! Assemble with Two Man Ladder Stand at ground level! Do not assemble at heights! Failure
to follow these instructions may result in serious injury or death!
WARNING! When hunting from a tree stand, falls can occur anytime after leaving the ground causing
injury or death. Always wear a full-body fall arrest system (FAS) comprising a full-body harness, tether,
tree belt and Suspension Relief Devise at all times after leaving the ground. When using a ladder stand,
you must connect to the tree as soon as possible and prior to stepping on the platform of the tree stand.
Please read and review your full body harness instructions included with Tandem Stand. Single safety
belts and chest harnesses are no longer allowed and should never be used as they put the user at
serious risk of injury or death. If you are not wearing your full-body arrest harness properly attached to
tree that is protecting you for a fall, do not leave the ground. Failure to follow these instructions may
result in serious injury or death!
WARNING! THIS PRODUCT DOES NOT COME WITH A FULL BODY HARNESS. Not to use without a
Full Body Harness (Fall Arrest System) that meets the requirements of Test Method F2337. Full body
harnesses are provided with all tree stands that have been certified by an independent testing facility to
meet or exceed industry standards and are available as after market purchases. This product is never
intended to be used without a full body harness. If full body harness is unavailable, do not install or use
product.
WARNING! Thoroughly inspect this or any other Game Winner product(s) prior to use for signs of wear,
rot, corrosion, cracks, fraying, deterioration and/or any other type of damage. DO NOT use this or any
other Game Winner product(s) if they show evidence of wear, rot, corrosion, cracks, fraying,
deterioration and/or any other type of damage. Failure to follow these instructions may result in serious
injury or death!
WARNING! This product is designed for adult use only. No one under the age of 18 should attempt to
use this or any other Game Winner product(s) without direct adult supervision.
WARNING! Do not remove, modify any portion or otherwise mechanically modify this product or its
assemblies in any manner. Make certain that all parts are used in the assembly of this product. Parts are
designed and tested to work together. Modification, additions, misuse, part omission or substitution
shall immediately void your factory warranty and may result in serious injury or death! If you suspect a
part(s) is missing and/or damaged, immediately contact Innopower Inc. at [phone] for
replacement of missing or detective parts. Never modify your stand in any way by making repairs, or
altering, omitting, adding or attaching anything to it. ALWAYS USE GENUINE FACTORY AUTHORIZED
INNOPOWER INC. REPLACEMENT PARTS. USE OF ANY REPLACEMENT PARTS OTHER THAN
GENUINE INNOPOWER INC. PARTS VOIDS YOUR WARRANTY AND RELIEVES INNOPOWER INC.
OF ANY RESULTANT LIABILITIES AND MAY RESULT IN SERIOUS INJURY OR DEATH! DO NOT
modify, fix/repair, alter, bend, cut, weld, or heat this product in any way. Failure to follow these
instructions may result in serious injury or death!
WARNING! Inspect all safety devices each time before each use. DO NOT leave the ground or use
these devices if they show signs of wear, damage, deterioration, vandalism, fraying or other damage.
Factors such as tree growth, vandals, weather and animals may affect the performance of an
unattended tree stand or safety device. Do not store these devices outdoors when not in use. Failure to
follow these instructions may result in serious injury or death!

4
Parts List
1
Front U Frame for
Roof Top
Qty
1
2
Rear U Frame for
Roof Top
Qty
1
3
Connection Bars
Qty
2
4
Rear Vertical
Support Bars
Qty
2
5
Front Vertical
Support Bars
Qty
2
6
Side Connection
Bars
Qty
2
7
Roof Top Support
Bars (Female End)
Qty
2
8
Roof Top Support
Bars (Male End)
Qty
2
9
Camo Skirt and
Roof
(One Piece)
Qty
1
Tools Required (Provided)
1
Wrench
(2 pcs)

Assembly & Installation Instructions
Step 2:
Install Rear Vertical Support Bars
(#4) to the assembled Roof Frame
using two (2) M6x55 Bolts, four (4)
Steel Washers and two (2) Nuts as
shown in Figure 2.
Step 3:
Install Front Vertical Support Bars
(#5) to the assembled Roof
Frame using two (2) M6x55 Bolts,
four (4) Steel Washers and two
(2) Nuts as shown in Figure 3.
Step 4:
Install Side Connection Bars (#6)
to Front and Rear Vertical Bars
(#4,5) using four (4) M6x45 Bolts,
eight (8) Steel Washers and four
(4) Nuts as shown in Figure 4.
6
Figure 4
Figure 3
Figure 2
Step 1:
Connect the Front U Frame (#1) / Two
Connection Bars (#3) / Rear U Frame
(#2) and Bolted using four (4) M6x30
Bolts, eight (8) Steel Washers and four
(4) Nuts as shown in Figure 1.
Figure 1
WARNING! Do not overtighten the hardware. Overtightening can lead to structural damage
and may negatively affect the performance of your product.

Assembly & Installation Instructions
Step 6:
Install Roof Top Supports into welded
receptacles on the roof frame as
shown in Figure 6.
Step 7:
At ground level slip the Camo Skirt
and Roof over the previously installed
Frame. Make certain the sewn seams
line up with the roof frame. Connect
the Camo Skirt and Roof to the
frames using the Hook & Loop
Fasteners as shown in Figure 7.
7
Care and Maintenance
It is recommended that you store your accessory kit out of sunlight and out of any other harsh
environmental condition(s) that may adversely affect its performance.
Step 5:
At ground level install assembled
Roof Frame to the Tandem
Ladderstand’s Arm Rests.
A: Install Rear Vertical Support Bars
(4) onto Arm Rests using four (4)
M6x85 Bolts, eight (8) Steel Washers,
four (4) Thick Nylon Washers and four
(4) Nuts as shown in Figure 5.
B: Install Front Vertical Support Bars
(5) onto Arm Rests using two (2)
M6x65 Bolts, four (4) Steel Washers,
two (2) Thick Nylon Washers and two
(2) Nuts as shown in Figure 5.
Note: Please place one (1) Thick
Nylon Washer between the Arm
Rest and Vertical Support Bars.
Figure 7
Figure 6
Figure 5
Care and Maintenance
It is recommended that you store your accessory kit out of sunlight and out of any other harsh
environmental condition(s) that may adversely affect its performance.
M6x85
(For Step
5-A)
M6x65
(For Step 5-B)

Warranty Information
8
Important Warranty InformationImportant Warranty Information
Innopower Inc. warrants this Game Winner product against defect(s) in material and
workmanship, under proper use and storage, for the period of one (1) year from the date of
purchase. Proof of purchase, plus, the return of your warranty application card to our home
office, is required for any warranty claim. In the events this product is found to be defective
within the warranty period, Innopower Inc.’s only obligation and your exclusive remedy shall
be replacement or repair of any defective parts at our discretion. To obtain warranty service,
please contact Innopower Customer Service at [phone]. Exclusions to this warranty
include seat, paint, plastics, webbing and/or defects caused by operator misuse and/or
abuse. Limitation to liability include the forgoing warranty is made in lieu of all other
warranties, express or implied and Innopower Inc. disclaims any implied warranty of
merchantability and fitness. Innopower Inc. shall not be liable for any damages direct,
consequential or incidental arising out of the use or inability of this product.
Warranty Application Card
I have read and understand the safety, assembly and operating instructions provided with my
Game Winner product. I have read the warranty information and know that I can call
Innopower Inc. at [phone] with any questions or concerns that I may have about this
or any other Game Winner product. Mail to: INNOPOWER INC.
PO Box 265, E. Irvine, CA 92650. Email: [e-mail]
Name____________________ Purchase Location__________________________________
Address___________________________________________________________________
City/State/Zip______________________________________________________________
Purchase Date______________________________________________________________
Product____________________________________________________________________
Manufactured by Innopower Inc., PO Box 265, E. Irvine, CA 92650