Hambledon Table Lamp
Installation Instructions
Please read through these instructions and ensure they are kept for future reference.
Please note, this fitting is not supplied with a bulb.
Bulb recommended: 1 x E27, Max LED 10W
Customer Services:
www.gardentrading.co.uk
+44 (0)1993 845 559
Opening Hours: Monday - Friday: 8.30am - 5.30pm (Friday close at 5.00pm)
The Garden Trading Company Ltd, Carterton South Industrial Estate, Black Bourton Road, Carterton, Oxon, OX18 3EZ
Safety Information
1. This fitting should be fitted to a lighting supply with a protected 5-amp fuse or equivalent circuit breaker.
2. Always be sure to use the correct type and wattage of bulb as indicated on the fitting (and stated above).
3. Do not exceed the maximum wattage stated on the fitting.
4. Using the incorrect bulb or wattage may cause damage to the light and therefore void the warranty.
5. When changing the bulb, ensure the light is switched off and unplugged from the mains supply and allow the old bulb
to cool before handling.
6. If the external flexible cable appears damaged, the fitting might be unsafe. Contact Garden Trading for a replacement.
Dispose of bulbs carefully.
Extra Information/Notes
1. Please keep these instructions available for future use
2. We recommend cleaning with a soft dry cloth. Don’t use abrasive materials to clean this
product, as that may affect the finish and void the warranty
3. Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice
