Garden Trading Cornbury User manual

Cornbury Rechargeable LED Lantern
Installation Instructions
Please read through these instructions and ensure they are kept for future reference.
This tting is supplied with an LED bulb and USB charging cable.
Please note, no charging plug is supplied with this light.
Bulb included: LED 6W non-replaceable.
Customer Services:
www.gardentrading.co.uk
[phone]
[email protected]
Opening Hours: Monday - Friday: 8.30am - 5.30pm (Friday close at 5.00pm)
The Garden Trading Company Ltd, Carterton South Industrial Estate, Black Bourton Road, Carterton, Oxon, OX18 3EZ
Customer Services:
www.gardentrading.co.uk
[phone]
[email protected]
Opening Hours: Monday - Friday: 8.30am - 5.30pm (Friday close at 5.00pm)
The Garden Trading Company Ltd, Carterton South Industrial Estate, Black Bourton Road, Carterton, Oxon, OX18 3EZ
Safety Information
1. The light source of this luminaire is not replaceable
2. Once the light source reaches the end of life the whole luminaire shall need to be replaced
3. Light must not be switched on in the box
4. Please do not put the luminaire on high temperature surfaces and do not use in ammable
or humid environments
5. If the USB cable is damaged do not use
6. This light is not IP44 rated and therefore should not be left outdoors in wet weather
Extra Information/Notes
1. Ensure the power is turned off before cleaning
2. Please keep these instructions available for future use
3. We recommend cleaning with a soft dry cloth. Don’t use abrasive materials,
this may affect the nish and therefore void the warranty
4. Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

Instructions
1. Press the touch control pad (a) once to turn the light on.
2. To choose the desired level of brightness, press and hold the touch control pad (a).
This will increase or decrease the brightness level between a minimum of 10%
and maximum of 100%.
4. Release your nger at the desired brightness.
5. To turn off, press the touch control pad (a) once.
6. To charge, insert the USB cable (b) into the adaptor socket (c). The USB cable can be
inserted into an adaptor plug (not supplied) compatible with most mobile phone chargers.
It is also compatible to be charged from a computer or laptop USB sockets and portable
USB chargers.
7. When charging, the light (d) at the base will show red.
Once fully charged it will change to blue.
8. The maximum battery life on 10% brightness is 12 hours.
This will decrease to 4 hours on 100% brightness.
9. The light takes approximately 4 - 5 hours to charge from 0% to 100% charge.
In the event of this light not working correctly you will nd a reset button on the base.
To reset simply insert and press a pin or similar object into this small hole.
The lamp will be re-activated and should now work normally.
Please note, no reset pin is included with this product.
Specication
Wattage
Lifespan
Battery Life
(from fully charged)
Colour Temperature
Colour Rendering Index
Luminous Flux
Charging Time
Information
6W
35,000 hours
100% brightness: 4 hours
50% brightness: 9 hours
10% brightness: 12 hours
4000 - 4500K
80RA
150LM
4 - 5 hours
Key
(a) Touch Control Pad
(b) USB Charging Cable
(c) Charging Port
(d) Charging Light
IILACO29/02
(a)
(b)
(c)
(d)