Garmin Apollo NMC 2001 User manual

Quick Reference Guide
Apollo NMS 2001/2101
R
GPS IN USE(A)
45 11.87 PDOP
122 53.30 0.0
LORAN STANDBY
36 11.90
0 95 53.28
GPS USE?
36 11.90
0 95 53.28
LIT AIRPORT
LITTLE ROCK
CITY AR USA
ETE LIT 00:53
BRG134 91.5NM
Direct-TO Navigation
Press the button shown
Turn the Data (small) knob
Turn the Control (large) knob
SEL
Selecting Position Sensor For Navigation
Accesses Navigation Mode
Turn Large knob to display
Latitude/Longitude page.
Turn Small knob to display
the sensor to be used.
Press SEL to select for use.
Press ENT to verify sensor.
ENT
SEL
Accesses Direct-TO feature
Use Large and Small knobs
to retrieve your desired
destination waypoint.
Press ENT to verify
destination waypoint
ENT
D
How To Use This Guide
NAV

PRESS SEL TO
CREATE A NEW
FLIGHT PLAN
________
ENTER A NEW
PLAN NAME
MSP TO INS?
4___ __._NM
LEG ETE? __:__
TRIP 1 930NM
HOU TO MSP
INACTIVE
Activate A Flight Plan
FPL
SEL
Accesses Flight Plan Mode
Turn Large knob to the
"Create a New Flight Plan"
display.
Press SEL to begin.
Use Large and Small knobs
to name flight plan.
Press ENT to enter flight
plan name.
Turn Small knob clockwise
one click. Press SEL and
ENT to insert waypoint and
access waypoint retriever.
Retrieve first waypoint
using Large and Small
knobs.
Continue with ENT and
rotary knobs until last
waypoint has been inserted.
After last waypoint has
been retrieved and entered,
press SEL.
ENT
Accesses Flight Plan Mode.
Turn Large knob to display
desired flight plan.
Press SEL and ENT
buttons to activate.
ENT
Flight Plan Entry
SEL
ENT
ENT
SEL
SEL
For more detailed information on using the Flight Plan see Flight Plan Mode
in the NMC 2001 Operation Manual.
HOU AIRPORT
HOUSTON
CITY TX USA
______ TO_____
1 PRESS SEL
TO EDI T LEG
FPL

CREATEUSERWPT
BY LAT/LON
PRESS ENT
Accesses Database Mode.
Displays user waypoint
page.
Press ENT to begin.
Use Rotary knobs to name
this waypoint and specify
runway length.
Press ENT to save
waypoint to user database.
Creating A Present Position Waypoint
ENT
ENT
HANGAR
44 12.59NRWLEN
085 33.08W2500'
Emergency Navigation
Nearest airport is displayed.
Turn Small knob to view
other nearby airports.
Turn Large knob to display
closest VORs, NDBs,
Intersections, User
waypoints, and special-use
airspaces. Turn Small
knob to display emergency
destination waypoint.
Press to activate Direct-TO
feature, then press ENT to
verify destination waypoint.
ENT
D
NEAR1TOPPOS
OSH AIRPORT
BRG 252 11.0NM
NEAR1TOPPOS
8D1 AIRPORT
BRG 130 10.7NM
NEAR2TOPPOS
OSH AIRPORT
BRG 250 11.3NM
Waypoint Retrieval
When accessing the database, pressing and re-pressing SEL
toggles between flashing a single character and flashing the
entire field. Any character(s) that is flashing can be changed
with the Small knob, while turning the Large knob moves
the location of the flashing cursor.
To Change WAYPOINT IDENTIFIER
To Change FIELD
Turn Small knob to change character at flashing cursor.
Turn Large knob to move cursor to next character.
Press SEL to make field flash.
Turn Large knob to select different field.
Turn Small knob to change field.
FPL
EMG

Activates character editing - single character flashes.
In Waypoint Retriever mode, toggles between character and
field editing - all characters in field flash.
Saves editing changes and acknowledges "Yes" to prompts
such as "DEL?"
SEL
ENT
SEL
SEL
Press to access mode
Press twice to display "Home" page for that mode
With no cursor flashing, scrolls display to next major page
With cursor flashing, moves cursor to next changeable character or field
With cursor activated, changes flashing character or field
Displays next sub-page when diamond is displayed in lower
right-hand corner
Mode Buttons (NAV, DB, FPL, & SYS)
Large Knob
Small Knob
For help on retrieving waypoints, see the BASIC CONCEPTS section of the
Operation Manual
INFO
Button And Knob Use
When MSG flashes, press to display important messages.
Allows entry of Direct-TO destination waypoint.
Displays information on the waypoint or flight plan in view
- turning the Small knob displays any additional pages of
information.
D
MSG
Enroute
Within 30 nm of
Destination
IAF Active Waypoint
FAF Active Waypoint
At FAF (MAP Becomes Active)
At MAP (TO/FROM Transition)
MAHP Active Waypoint
Approach Checklist
Load Approach
Enable Approach & enter altimeter setting
(Approach annunciator turns ON)
(CDI goes to 1 nm full-scale sensitivity)
Verify Approach annunciator is ON
Set OBS/HLD: ON for Procedure Turn or Hold
OFF to sequence
Verify green Approach-Active annunciator is ON
Verify altimeter setting is entered
Set OBS/HLD: OFF to sequence to MAP
Verify Approach-Active annunciator is ON
(CDI goes to 0.3 nm full-scale sensitivity)
If NOT landing: Press OBS/HLD to cancel
Approach-Active
(Green Approach-Active annunciator turns OFF)
(Approach Annunciator remains ON)
(CDI goes to 1.0 nm full-scale sensitivity)
Verify OBS/HLD is ON
Location Action

1. Press FPL to reach Flight Plan Mode.
2. Turn the Large knob to display the
desired destination waypoint.
3. Press SEL.
4. Press ENT to prepare to load
approach waypoints.
5. Turn the Small knob to display the
available approach choices.
6. Press ENT to select the displayed
approach path.
7. Turn the Small knob to display the
approach legs.
8. Press NAV to return to Navigation Mode.
Approach Setup Summary
SEL
ENT
D
BTG44 TO SL
2 * 178 12.1nm
IAF FAF
B. Load Approach Information
or
Load a destination airport. Load a
stored Flight Plan, or edit the active
Flight Plan. You may also use the
Direct-TO button to choose a
destination. The destination
must be an airport that has an
established approach capability.
A. Load Destination Airport
*ACTIVE* 67nm
APPROACH: SLE
NDB 31: BTG44
*ACTIVE* 67nm
DEST WPT: SLE
LOAD APPROACH?
NAV
SEL
FPL
ENT
At Arc Intercept
On Arc
Inbound Leg Intercept
DME-Arc Checklist
1. Verify/Set OBS/HLD ON
2. Manually select Flight Plan leg to intercept
3. USE DME-Arc Page in NAV mode
4. Verify or select DME-Arc Reference Waypoint
5. Verify/Set autopilot in Heading mode or disengaged
1. Use DME-Arc page in NAV mode and aircraft heading to navigate
2. Use CDI/HSI to identify inbound leg intercept
1. Set/Verify OBS/HLD OFF
2. Use CDI/HSI to navigate
3. Press NAV twice to use standard NMC NAV mode page
4. Use autopilot as desired
Location Action

Flight Plan
Mode
NAV
Mode
Database
Mode
System
Mode
Emergency
Search
Messages
Active
Flight Plan
Create New
Flight Plan
Inactive
Flight Plan
Inactive
Flight Plan
Access
Database
Delete Wpt
Comment
Delete
User Wpt
Create Wpt
Rad/Dist
Create
Wpt L/L
New
Messages
Old
Messages
FPL
NAV DB EMG MSG
SYS
NMC Function Summary
Runway
Limits
Search
Around Wpt
Nearest
20 User
Nearest
20 INT
Nearest
20 NDB
Nearest
20 Airport
Special
Use Airspace
Nearest
20 VOR
Misc.
Sensors
Position
Sensors
System
Info
NAV
Info
Count.
Timer
Position
Sensors
Parallel
Track
Alt
Asst
RAIM
@ Dest
Nav
Page
From, To,
Next Wpt
Arc
Assist
Modify
User Wpt
Tu r n
Large knob
to view
top level
pages
Press the indicated button
and then turn the Large
knob to view the pages
shown. Turn the Small
knob for further info when
available (diamond shown).
USA 800-525-6726
Canada 800-654-3415
International [phone]
FAX [phone]
http://www.iimorrow.com
P/N 561-0228-00 April 1996
1996 by II Morrow Inc.
Printed in the U.S.A.
All Rights Reserved
2345 Turner Rd., S.E.
Salem, OR 97302
II MORROW
VISIONARY THINKING TODAY