Garmin DEZL User manual

DĒZL™HEADSET
Owner’s Manual

© 2022 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or
improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to
www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express
permission of Garmin.
dēzl™ is a trademark of Garmin Ltd. or its subsidiaries. This trademark may not be used without the express permission of Garmin.
The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such word mark or logo by Garmin is under license.

Table of Contents
Getting Started................................. 1
Device Overview...................................... 2
Charging the Device................................ 3
Turning the Headset On or Off............... 4
Turning Active Noise Control On or
Off.............................................................5
Media Controls........................................ 6
Microphone Controls.............................. 7
Removing the Earcup.............................. 8
Pairing with Your Smartphone.......... 9
Voice Assistant Features.................. 9
Tips for Using Voice Commands........... 9
Launching Garmin Voice-Activated
Navigation............................................. 10
Using the Voice Assistant on Your
Smartphone........................................... 11
Settings..........................................11
Device Maintenance....................... 11
Updating the Software Using the Garmin
dēzl App................................................. 11
Garmin Support Center......................... 11
Device Care............................................12
Device Information......................... 13
Status LEDs........................................... 13
Specifications........................................14
Troubleshooting............................. 14
My headset battery does not charge... 14
OK Garmin voice commands do not
work....................................................... 14
Left and right audio channels are
reversed................................................. 14
Resetting the Headset to Factory Default
Settings.................................................. 14
Table of Contents i

Getting Started
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Getting Started 1

Device Overview
Microphone boom
Move the microphone boom to the vertical position to mute the microphone.
Move the microphone boom left or right to enable the microphone and change the
headset orientation.
Power button Press to turn the device on or off.
USB power port Connect a USB power cable to charge the headset.
3.5 mm audio jack Connect a 3.5 mm audio cable.
Bluetooth® button
Hold to enter Bluetooth pairing mode.
Press to connect to the next paired device.
ANC button Press to enable or disable active noise control.
Rocker
Move up to increase the volume.
Move down to decrease the volume.
Hold up to move to the next audio track.
Hold down to move to the previous audio track.
Press to play, pause, or resume media.
Press to answer incoming calls or switch to a second call.
Press and hold to hang up a call.
Garmin® button
Press to activate OK Garmin voice commands with a paired navigation device.
Hold to activate the voice assistant on your smartphone.
Earcup release button Press to remove the earcup (dēzl Headset 200 only).
2 Getting Started

Charging the Device
WARNING
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the product
box for product warnings and other important information.
NOTE: The device does not charge when outside the approved temperature range (Specifications, page 14).
1Plug the small end of the USB cable into the USB port on the headset.
2Plug the large end of the USB cable into a power source, such as a USB wall charger or a computer USB port.
3Charge the device completely.
The status LED flashes green while charging. The status LED is solid green when charging is complete.
Getting Started 3

Turning the Headset On or Off
• To turn on the headset, hold the power button for three seconds.
• To turn off the headset, hold the power button until a tone plays and the headset turns off.
4 Getting Started

Turning Active Noise Control On or Off
• To turn on active noise control, press ANC .
A tone plays and the ANC LED turns on.
• To turn off active noise control, press ANC again.
A tone plays and the ANC LED turns off.
Getting Started 5

Media Controls
You can use the rocker to control the headset volume, music playback, and phone calls. You can move the
rocker up and down, and you can press it like a button.
• Move the rocker up or down to increase or decrease the volume.
• Hold the rocker up to play the next audio track.
• Hold the rocker down to play the previous audio track.
• Press the rocker to play, pause, or resume audio playback.
• Press the rocker to answer incoming phone calls from your paired smartphone.
• Press the rocker to switch to a second active call.
• Press and hold the rocker to hang up a call.
6 Getting Started

Microphone Controls
You can move the microphone boom to either side to turn it on. If you have a stereo headset model, the left and
right orientation of the headset adjusts automatically to match the direction of the microphone. You can move
the microphone boom to the "up" or vertical position to mute the microphone.
Getting Started 7

Removing the Earcup
You can remove an earcup from the stereo headset to keep one ear open while you drive.
NOTE: The removable earcup is available only on the dēzl Headset 200.
1Press and hold the earcup release button .
2Pull the earcup off of the headset.
8 Getting Started

Pairing with Your Smartphone
You can pair your dēzl headset with your smartphone and the dēzl app. You can also pair the dēzl app with a
compatible Garmin dēzl navigation device to enable advanced Garmin voice-activated navigation through your
headset.
1From the app store on your smartphone, install the dēzl app.
2Turn on your dēzl headset, and place the headset and your smartphone within 3 m (10 ft.) of each other.
3On your smartphone, open the dēzl app.
4On the headset, hold until the blue LED flashes.
5From the dēzl app, select Garmin dēzl Headset.
6Follow the on-screen instructions on your smartphone to finish setting up your headset.
The main app dashboard appears. After the devices are paired, they connect automatically when they are turned
on and within range.
Voice Assistant Features
NOTE: Voice assistant features are not available for all languages and regions.
Voice assistant features allow you to use your smartphone or a compatible Garmin navigation device by saying
words and commands.
Tips for Using Voice Commands
• Speak in a clear voice.
• Respond to voice prompts from the device as needed.
• If you do not receive a useful response, try rephrasing your request.
Pairing with Your Smartphone 9

Launching Garmin Voice-Activated Navigation
If you pair your headset with the dēzl app and a compatible dēzl navigation device, you can use Garmin voice-
activated navigation features.
Garmin voice-activated navigation allows you to use plain language spoken requests to search for locations and
addresses, start routes with turn-by-turn directions, and more.
• Press GARMIN , and make a spoken request.
For example, you can say phrases like these:
◦Take me home.
◦Where's the library?
Placing a Phone Call Using Your Headset
You can use your headset to call a contact from the phone book of your paired smartphone.
1Move the microphone to the forward position.
2Press GARMIN.
3Say Call, and say the contact name.
For example, you can say Call Mom..
10 Voice Assistant Features

Using the Voice Assistant on Your Smartphone
You can activate the voice assistant on your smartphone using your dēzl headset.
• Hold GARMIN for three seconds.
A tone plays and your phone's voice assistant activates.
Settings
The settings for your dēzl device are configured using the dēzl app. Before you can configure settings, you must
pair your device with the dēzl app (Pairing with Your Smartphone, page 9).
Device Maintenance
Updating the Software Using the Garmin dēzl App
When an update is available, the dēzl app sends it to the headset automatically.
The next time you start your headset, it notifies you that it is installing an update.
Do not turn off your headset while the update is installing.
After the update is complete, the headset restarts and operates normally.
Garmin Support Center
Go to support.garmin.com for help and information, such as product manuals, frequently asked questions,
videos, and customer support.
Settings 11

Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
Cleaning the Outer Casing
NOTICE
Avoid chemical cleaners and solvents that can damage plastic components.
1Clean the outer casing of the device using a cloth dampened with a mild detergent solution.
2Wipe the device dry.
12 Device Maintenance

Device Information
Status LEDs
The ANC LED , the Bluetooth LED , and the power LED show the headset status.
ANC LED Activity Status
White Active noise control is turned on.
Off Active noise control is turned off.
Bluetooth LED Activity Status
Blue The headset is connected to a Bluetooth device.
Flashing blue The headset is in Bluetooth pairing mode.
Off The headset is not connected to a Bluetooth device.
Power LED Activity Status
White The headset is turned on and is operating normally.
Flashing green The headset is charging.
Green The headset is fully charged.
Red The headset is receiving voltage that is too high from the power source or the tempera
ture is too high for the headset to operate.
Flashing red The headset battery is low.
Off The headset is turned off or does not have power.
Device Information 13

Specifications
Operating temperature range From -20° to 60°C (from -4° to 140°F)
Charging temperature range From 0° to 45°C (from 32° to 113°F)
Input voltage From 4.75 to 5.25 Vdc, 60 mA
Wireless frequency 2.4 GHz @ 8 dBm maximum
Troubleshooting
My headset battery does not charge
• Verify the headset is receiving power from the connected USB cable.
The power LED flashes green while the headset is charging.
• Inspect the power LED (Status LEDs, page 13).
If the LED is red, the headset is receiving voltage that is too high from the connected power source, or the
headset temperature is too high to operate.
OK Garmin voice commands do not work
If you have paired your phone and headset, but some features do not work, you can take these actions to
resolve the issue.
• In the app store on your smartphone, update the dēzl app to the most recent version.
• Verify the dēzl app on your smartphone is paired with both your headset and a compatible dēzl navigation
device.
Left and right audio channels are reversed
The dēzl headset determines the orientation of the audio channels automatically based on the last position of
the microphone boom.
Turn on the headset, and move the microphone boom to the forward position.
The audio channels reset automatically.
Resetting the Headset to Factory Default Settings
You can reset your headset to the factory default settings. Resetting clears all data from the headset.
1Turn on the headset.
2Hold GARMIN and for five seconds.
The LEDs flash while the headset resets.
14 Troubleshooting

support.garmin.com
GUID-761D53AB-C0CD-418B-A8E6-A55278A127A2 v1February 2022