GG Telecom Gg01 User manual

Gg01
Bluetooth Headset
User Manual
Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
1
Contents
Introduction ........................................................................................................ 2
Features............................................................................................................. 3
Product Outlook ................................................................................................. 4
What’s in the package?...................................................................................... 5
Wearing the headset.......................................................................................... 6
Turning your headset ON and OFF.................................................................... 8
Prepare to use your Bluetooth headset.............................................................. 9
Making a phone call ......................................................................................... 11
Last call redial .................................................................................................. 12
Ending a call from the headset......................................................................... 13
Receiving/Answering a call .............................................................................. 14
Reject a call ..................................................................................................... 15
Speaker volume and volume control button ..................................................... 16
Low battery warning......................................................................................... 17
Low signal warning .......................................................................................... 18
Function / Button Matrix ................................................................................... 19
LED indicator chart .......................................................................................... 20
Audio indicator chart ........................................................................................ 21
FAQ.................................................................................................................. 22
Bluetooth headset specification ....................................................................... 24
Certification and safety approvals / General information.................................. 25
Warranty and parts replacement ...................................................................... 26

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
2
Introduction
The Gg01 Bluetooth headset is a portable headset solution based on Bluetooth
wireless technology. The headset intended for hands free communication with
mobile phone, PC or any device which compatible with Bluetooth wireless
technology version 1.1 that support the Headset profile or Handsfree profile.
This user guide focus on establish a connection with your mobile phone. You
need to have a phone with embedded Bluetooth capability, or a phone with a
Bluetooth adapter connected to it. The phone can be tucked away in your
pocket or in a bag. You can handle incoming call and outgoing calls, and adjust
the volume up or down, using the buttons on the headset.
The headset power is provided by an integral rechargeable battery. The battery
must be charged with the appropriate charger. Gg01is equipped with a lithium
polymer rechargeable battery to perform highly safety, but also supply 250 hours
standby time and 9~11 hours talk time.
Note: Talk time and standby time are varied according to different mobile phones.
Please make sure that you:
1) Fully charge your Gg01 headset at least 4 hours before you use it the first
time.
2) To pair the headset with a Bluetooth mobile phone or other devices before
you making calls.
Thank you for choosing Gg01. We hope that you enjoy your choice.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
3
Features
－ Support both Bluetooth Headset and Hands free profile
The Gg01 Bluetooth headset support both Bluetooth headset and hands free profile,
no matter what Bluetooth audio gateway profile that your Bluetooth mobile phone
support, Gg01 can communicate with them well.
－ 250 hours standby time and 9~11 hours talk time
The Gg01 Bluetooth headset supports 250 hours standby time and 9~11 hours talk
time to fulfill the operation requirements for modern mobile phone accessories.
－ Voice dial and last calls redial
If your Bluetooth mobile phone supports voice dial function and you had save a voice
tag on your mobile phone, than you can make a voice dialing via Gg01. With
Handsfree profile, The Gg01 Bluetooth headset also support redial function if you
want to redial the last calls.
－ Weak signal and low power alert
When the distance between the Bluetooth headset and mobile phone too far to keep
the Bluetooth link, the Bluetooth headset will alert you by short beep to remind you.
Or once the power of Bluetooth headset too low to work, the headset will alert you to
recharge the headset.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
4
Product Outlook
1. headset indicator light:
Blue/red/purple colors indicating the status of the headset.
2. Talk button:
To accept or end a call, or advance functions with Volume control button
(please refer to the Function/Button matrix).
3. Volume control button up and down:
Adjust the speak volume, or advance functions with Talk button (please
refer to the Function/Button matrix)
4. Speaker:
For incoming audio
5. Microphone:
Voice input for outgoing audio.
6. Charging port:
Contacts for charging the battery.
1.
2.
3.
4.
6.
5.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
5
What’s in the package?
Your Gg01 Bluetooth headset package comes equipped with a headset and a
charging solution. In this package you will find:
1. One Gg01 Bluetooth headset.
2. One 100-240V power adapter.
3. One user guide.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
6
Wearing the headset
Headset can be worn on either ear by adjust the speaker direction. Please refer
to the drawing for speaker direction change.
1. Hold the headset firmly and carefully, then turn the speaker housing.
2. Place the headset behind your ear.
Note: The rotate angels is only 180 degree from outer part, please do not over rotate
the speaker.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
7
3. Loop the top of the headset over the top of your ear.
4. Adjust the speaker housing into your ear canal.
5. The microphone will then be position in the direction of your voice.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
8
Turning your headset ON and OFF
1. To switch your headset on, press and hold Talk button for about 3 seconds,
the blue indicator lights 2 times, release the button. The blue indicator will be
then blinking once every about 4 seconds. This is standby mode which
means the headset is awaiting a call.
2. To switch your headset off, press and hold Talk button for 3 seconds until red
indicator lights 2 times, release the button.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
9
Prepare to use your Bluetooth headset.
1. Charging and battery time
1) Before you can use your headset, you need to fully charge the headset.
2) The headset can be on or off while charging.
3) If left unused a fully charged battery will discharge itself over time. It is
better not leave the battery connected to a charger longer than 3 days,
since overcharging might shorten its lifetime.
2. To charge the headset, please follow this guide:
1) Connect the adapter into an electrical outlet.
2) Plug the adapter’s connector into charging port.
3) While charging, the red indicator light will stay on and remains light until
the charging is completed. When the charging is completed, the
indicators are off i.e. power off.
4) Charging time is about 1 – 2 hours.
5) You can now take the adapter’s connector out from the headset and
disconnect the adapter from the electrical outlet.
3. Pairing the headset to the phone
Before you use your headset for the first time, you must pair the headset to a
Bluetooth mobile phone. The Bluetooth connection between the headset and
your phone can be established by setting up a paired link. With a paired link, the
phone records the headset’s ID, and process with future use. Please use the
following guide.
Before you can pair your headset you need to put it into pairing mode.
Note: Pairing must be done every time while the headset establishes a link with a
different Bluetooth mobile phone.
Pairing mode can only be entered while reset the Gg01. During pairing, it is
recommended that the headset and phone distance is as close as possible-with
no solid objects in between.
Note: Full charge your Gg01 for at least 4 hours before you use it the first time.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
10
To proceed pairing the headset with the mobile phone, please follow this guide:
1) Check the mobile phone user guide, then, find out the locations of
Bluetooth and “Bluetooth device discovery”.
2) Power ON the Gg01 Bluetooth headset.
3) Getting into Headset Pairing mode by press “Talk”, “Vol. Up” and “Vol.
Down” buttons at the same time to reset the headset, you can see the
purple indicator blanking 2 times then blue indicator and red indicator
will cross blink per second, now the Gg01 is waiting for pairing now.
4) Perform a “Bluetooth device discovery” from the mobile phone.
Note: It may take several seconds to establish connections.
5) The phone’s display will advise that it has found Gg01 and ask you to
confirm that you want to pair with it. Please confirm this.
6) Enter the passkey “1234” when your phone menu prompts you, and the
phone will start to pair the headset.
7) Your phone screen will advise that pairing has been successful, and the
blue indicator on your headset will rapidly blinking 3 times every 4
seconds when Bluetooth pairing has been established.
If the pairing fails, the blue indicator and red indicator keep cross blinking and
keep about 120 seconds then stop. A re-pairing procedure is needed. Please
refer to step 1) ~ 7) above.
Note: Your phone screen will also give the status. Once the headset and phone have
successfully paired – you are ready to place and receive calls.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
11
Making a phone call
You can make a phone call by dial the keypad on your mobile phone as usual or
using voice dial function with Gg01, please see following guide to make a phone
call:
1) Keypad dial
Just make a phone call by dial the keypad on your mobile phone as usual, you
can hear the ring tone in Gg01 while waiting for accept call; after the call is
accepted, you can start the conversation with Gg01.
Note: For Nokia Bluetooth mobile phone users: Always check the link status with the
Gg01. Unlike other Bluetooth mobile phones, Nokia mobile phone uses
“always-on” mechanism for its paired device, so the link between Nokia phone
and Gg01 is always active, but if the link had been broken such as signal lost,
Nokia phone won’t recover the link even Gg01 is backed within the signal range.
If the link is active between Nokia phone and Gg01, users can see a headset
symbol in mobile phone screen or users can hear the key tone while dial up,
users can also press the “Talk” button on Gg01 to make this link active.
2) Voice dial
If your mobile phone supports voice dialing, you can use this feature with Gg01
headset. Please refer to your phone’s user guide for more information on voice
control.
If the voice tag is recorded in your Bluetooth mobile phone, just press the “Talk”
button to active the connection between Gg01 and your Bluetooth mobile phone,
then speak the voice tag you recorded in your phone, your Bluetooth mobile
phone will automatically start dialing the number and make the phone call.
Note: For Siemens S55 Bluetooth embedded phone, please press the Talk button after
dial up to active the Bluetooth link.
Note: For Panasonic X70 Bluetooth embedded phone users, users have to switch
device to Bluetooth Link (Gg01) in the Handsfree device menu after the call is
accepted.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
12
Last call redial
The Gg01 Bluetooth headset supports last call redial function, you can easily
redial the last call by simply press and hold the “Vol. Down” button until you hear
the notice tone in your headset, then release the button and waiting for accept
call.
Note: This function only supported by Handsfree profile, if your mobile phone
supports only Headset profile, this function will not be active due to the profile
limitation.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
13
Ending a call from the headset
To end a call, when wearing the headset – press the headset’s “Talk” button. Or
you can end the call from the phone’s keypad or when the other side hangs up
the phone, the call ends automatically.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
14
Receiving/Answering a call
If there is an incoming call while wearing the headset, you can hear a ring tone
in the headset, and just press the headset’s “Talk” button to answer the call.
If you are not wearing the headset, you can see the purple indicator blinks per
second to notice you place the headset on your ear in the normal wearing
position and use the “Talk” button to accept the call.
If your mobile phone supports auto answering, the headset will take the
incoming call and you don’t need to press any button.
Note: For Nokia Bluetooth mobile phone users: If the link is not active between mobile
phone and Gg01, the incoming call won’t be transferred to Gg01.
Note: For Nokia Bluetooth mobile phone, user can hear the same sound from mobile
phone while dialing keypad and waiting for accept call. If your mobile phone
does not support this feature, you will hear the default sound in Gg01 to notice
you the current status.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
15
Reject a call
The Gg01 Bluetooth headset supports reject incoming call from headset, when
you hear the ring tone or see the purple indicator blinks per second, you can
press and hold “Talk” button for 3 seconds to reject the incoming call.
Note: This function only supported by Handsfree profile, if your mobile phone
supports only Headset profile, this function will not be active due to the profile
limitation.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
16
Speaker volume and volume control button
The Gg01 Bluetooth headset offers adjustment of speaker volume by press the
“Vol. Up” or “Vol. Down” button. You can adjust the volume in 15 pre-set levels.
Each button pressed increases/decreases one volume level, you can repeat the
button press until a satisfactory level is reached. An audible tone will be played
while either the minimum or maximum volume has been achieved.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
17
Low battery warning
The headset needs re-charging when the red indicator is rapidly blinking twice
every 5 seconds. You can also hear a special tone from the headset.
Once the low battery warning indicator starts, you have around 3 minutes of talk
time left and you will then need to recharge the battery in the headset.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
18
Low signal warning
When you ware the Gg01 and are too far away from your paired Bluetooth
mobile phone, you will hear the warning alert every 3 seconds, and the blue
indicator will blinking for every half second.
Note: Always put your Bluetooth mobile phone and Gg01 within the Bluetooth signal
range to avoid signal lost. Some Bluetooth mobile phones will not automatically
active the Bluetooth link after the Bluetooth signal recovered due to its
Bluetooth operation mechanism.

Gg01 User Guide Ver. 1.0
G.G. TELECOM(2002) INC.
4F, #9, Alley 2, Lane 35, Ji-Hu Rd., NeiHu, Taipei City 114, Taiwan R.O.C.
Tel: + 886- 2-8751 0222 Fax: [phone]
19
Function / Button Matrix
Function Button
Power On/Off “Talk” (+)
Talk/End call/Voice Dial “Talk” (-)
Reject call “Talk” (+)
Volume Up “Vol. Up” (-)
Volume Down “Vol. down” (-)
Last call redial “Vol. down” (+)
Reset “Talk” and “Vol. Up” and “Vol. down” (-)
 (-) means press the button.
 (+) means press and hold the button for 3 seconds.