Gawker G1083PDIR User manual
DESCRIPTION
PRECAUTIONS
FEATURES
PARTS INSTRUCTION
G1083PDIR
1. Sony 720P CMOS sensor
2. CVBS 960H output,support 720P/60fps output meanwhile
. High resolution, 720P, true color recovering
. Self-adaptive 2D/3D image denoising
5. Waterproof: IP66
6. simple operation
7. OSD menu
1. Use the Appropriate Power Supply.
The input power forG1083PDIR is DC12V/AC24V. Be sure toconnect it to theappropriate power,
2. Do not attempt to disassemble the camera.
To preventelectric shock, do not remove screws or covers. There are no user serviceable
parts inside. Any questions please ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
4. Do not place the camera in the following locations:
Locations where temperature is lower than -20 C or higher than 55 C;
Locations where humidity is higher than 90%;
5. Clean the CMOS faceplate with care.
When cleaning the CMOS panel, do not use strong or abrasive detergents, use apiece of lens
tissue or cotton tipped applicator and ethanol.
6. Do not attempt to aim the camera at the sun.
Do not attempt toaim the camera atthe sun or otherextremely bright objects, thatcause smear
to appear irrespective ofwhether the camera isoperating or not. Thiscan damage the CMOS
(Complementary Metal Oxide Semiconductor).
7. Do not put the camera in aplace with interference.
When this camera is installed near the equipment like wireless communication device that
emits strong electromagnetic field, some irregularity such as noise on monitor screen may
happen.
wrong connection may causemalfunction and /or damageto the video camera.
G1083PDIR uses advanced imaging technology with resolution as high as 720P, CVBS 960H
output, support 720P/60fps output meanwhile, self-adaptive 2D/3D noise reduction..
G1083PDIR comes with a powerful OSD menu that include motion detection, digital zoom,
privacy zones, lens shading compensation, DPC, Auto electronic shutter, AWB, image
sharpening, etc.
1DomeEnclos eprotect scameralensandbod y
2 Glasscove rscrew hole
3.Base
4.Wire out hole
5.Stages of a screw the lid
6.OSD
7.IR LED
8.Lens
9. Fou r installscrewsholes
1
2
3
4
5
6
7
8
9
(At bott omof the ba se)
FAR NEAR
TELE WIDE
36-17-R00980 (RoHS)S154A G1083PDIR A4 /B0 (5580IHBB68A) 2.8-12mm AC24V
Specifications
Main menu
Specifications are subjected to change without notice.
DAY&NIGHT
ZONE
MASKING
IMAGE
3D-NR
AE MODE
IMAGE ENHANCE
FLIP
IRIS
WB
MIRROR
BRIGHTNESS
ZOOM IN
MOTION
DETECTION
VIDEO
STANDARD
LANGUAGE
LOAD DEFAULT
SOFT VERSION
SAVE&EXIT
AUTO
B&W
COLOR
EXTERNAL
STATUS
VERTICAL SIZE
HORIZON SIZE
HORIZON MOVE
VERTICAL MOVE
STATUS COLOR
HORIZON SIZE VERTICAL SIZE
HORIZON MOVE VERTICAL MOVE
PAL NTSC
ChineseEnglish
150*107mm
1120g
DC12V/300mA, AC24V/5.6W
100 feet
Pick up device
Effective pixels
Scanning system
Sync. System
Resolution
Lens
O.S.D
White balance
BLC
NR
Mirror function
Image adjustment
Motion detection
Privacy zones
Day & night
S/N ratio
Electronic shutter
Video output
Min. Illumination
Power supply
Power consumption
Operation temperature
Dimension
Weight
Contrast/Sharpness/Saturation
2:1 interlaced
Internal
Built-in
AWB-PRO/AWB-TEMPORA
AWB-AI/AWB-GW/AWB-CCT
ON/OFF/AUTO
3D noise reduction
ON/OFF
Off/on(4 areas)
Auto / B/W/ Exton / Color
more than 50dB AGC off)
Auto
1.0Vp-p composite videooutput, 75
0 Lux(IR on)
Off/on(8 areas)
IR distance
NTSC:960(H)*480(V)
720P
PAL:960(H)*576(V)
1/3" SONY CMOS
2.8-12mm
-20 ~55
DC 12V/AC24V( 10%)
18 Units infraredLED( 5mm/850nm)
IR LED
1Loose the 4 glass coverscrew by screwdriver,take theglass cover out
2Loose the Installed setscrews to separate the subpanel
from camera body
3Drill 4 holes in the position needed inaccordance with the installation holeon the subpanel
push the Expansion Bolt insidethen tighten the screws make the installation hole aim at the
four screws and fixit
4Choose the way the wire out if out from the ceiling then need a hole on it if from the side of
the camera,then just need to loose theStages of a screw the lid get thewire out from it
Camera installation
Adjust ment for camera direction
1 When the camera fixed on the ceiling,you can ajust the angle by adjustment of the 3 axis bracket
Maximmum 355 vertical rotation,35 horizontal rotation 355 dipping rotation
2 Adjust ZOOM to the position you need,then adjust FOCUS to get clearer image.
3 Fix the glass cover on the camera body.
Appearance size
Setup
107 mm
150 mm
D
R
OSD function set
Menu: choose function or backto last level
Up/down:up or down to movevertically
Left/right:to move left or right horizontally ormodify parameters means with subordinate
Menu set
Menu operation
In camera the key toset the camera
UPUP
DOWNDOWN
LEFTLEFT RIGHTRIGHT
MENUMENU
