Genie GRM2U User manual

User Manual
Please read these instructions carefully before operating the unit
and keep for further reference.
2U Rack Mount Plate for GRM
Range of Products
GRM2U

Contents
ii
1.0 Introduction..........................................................................................................3
1.1 Product Features...........................................................................................3
1.2 Specification ................................................................................................3
1.3 Dimensions ...................................................................................................3
1.4 Panel Diagram ..............................................................................................4
1.5 Supporting Devices......................................................................................4
2.0 Installation ...........................................................................................................5
2.1 Package Contents ........................................................................................5
2.2 Installation Steps .........................................................................................5

3
The Genie GMRM2U is specifically designed for the GRM series of products. Up to 16
GRM devices can be installed to the GRM2U management rack. The GRM2U fits into a
standard 19” cabinet which makes it easy to install and maintain at a reasonable cost.
1.1 Product Features
• 19” and 2U design
• Holds 16 units, no tools required
• Integrated design, no screw riveting
1.0 Introduction
1.2 Specification
1.3 Dimensions
Operating Temperature -20~55°C
Storage Temperature -40~70°C
Humidity 0–95% (Non-Condensing)
Dimensions 520 × 120 × 89 mm
Load Bearing >15kg
Weight 500g
520mm
89mm
120mm

User Manual 2U Rack Mount Plate for GRM Range of Products
4
1.5 Supporting Devices
• GRMPOE102
• GRMPOEOC
1.4 Panel Diagram
1Server fixed hole Screws through the rack and can be fixed in the standard rack.
2Module fixing hole GRM series modules through the two holes with GRM rack.
3Rail Compatible with guide slots of GRM series products. It’s easy to install.
4Windows GRM series interface modules.
1122334455667788991100111111221133114411551166
1122334455667788991100111111221133114411551166
11
2244
33

5
2.0 Installation
2.1 Package Contents
Check for the following. If there is any missing, please contact your supplier.
• 1x GRM2U rack
• 2x rack handle
• 32x product fixed hand tighten screws (M3)
• 4x handle screw (M4)
2.2 Installation Steps
1. Pepare the accessories. 2. Install the items onto the GRM2U.
3. Tighten with the screws.
5. Centralise Power Supply installation.
4. Install the GRM2U onto the rack.
6. Install on the rack independently with
hangers.

Sales [phone]
Enquiries [email protected]o.uk
Website www.genieproducts.co.uk