Genius 722 User manual

Genius Car Alarm
www.alarmasgenius.com
1
722 Car Alarm 2 way

Genius Car Alarm
www.alarmasgenius.com
2
Dear customer,
Thank you very much for your purchasing of the
2 way car alarm products we manufactured.
1. This product is designed to install on all 12V
universal vehicle. The system possesses
multi-functions. For your understanding about
the product, read the instruction carefully to
implement its features fully.
2. If the system manual shows note like “refer
Alarm function RF programmed”, this function
becomes effective only after installation of
additional equipment as is required by the
system and also needed to be program.
3. Besides the functions described in the
manual, the system can also support the
following products:
A) Engine Start Module: When combined with
engine start module, it is possible to remote
control and monitor of vehicle like engine start
or shutdown (effective range about 1000
meters).
B) GSM Module (Mobile Phone Module): When
combined with GSM module, if the vehicle is in
an abnormal condition, system will
automatically notify two-way remote. Moreover,
it will send a short message (SMS) and make
a phone call to inform car owner about car
condition. On the phone, GSM module will
automatically play voice message which tells

Genius Car Alarm
www.alarmasgenius.com
3
car owner’s car condition. Of course, from
outside call in to the machine go through the
voice message guide to make command such
as system arm/disarm, door lock/unlock,
engine start/ shut down etc… You even can
use short message (SMS) to control system.
The system can be programmed to hold 4
different sets of phone numbers to inform car
owner. Because of using the telephone net,
car owner at anytime and anywhere to know
car condition.
C) Satellite Tracking Module (GSM/GPS/GIS):
When combined with satellite tracking module,
all the above functions in (B) GSM Module
would be included in the system. Moreover, car
owner can use short message (SMS) to notify
location of the car. Because the system
includes GIS (Geographic Information System),
car owner can use the short message displays
in mobile phone in order to find out the location
of the car. Message also told owner car status
such as if the car is on the move or not and with
report of speed of the car (km/hr). When car
had been lost, the message would be able to
trace it. This function helps car owner to search
car back without the need of E-map, PDA and
other people’s assistance.

Genius Car Alarm
www.alarmasgenius.com
4
System function guide
2-way LCD Transmitter indication······················· 5
Transmitter control quick table··························· 7
Multi-function switch quick table························· 8
Remote door lock/arm····································· 10
Window auto roll up········································ 10
Defective zone bypass···································· 10
Remote door unlock/disarm ····························· 10
Dome light···················································· 10
Security diagnostic report ······························· 11
Auto relocked ············································· 11
Door auto lock/unlock upon ignition ··················· 11
Sensor by pass ············································· 12
How to adjust internal shock sensor sensitivity ··· 12
Auto arm ······················································ 13
Remote alarm audible/mute mode ····················· 14
Remote valet ON /OFF mode ··························· 14
Remote check car status ·································14
Remote car search········································· 14
Remote active channel # 1 ······························ 15
Remote panic················································ 15
Remote anti-carjack ······································ 15
Switch-controlled anti-carjack standby and cancel 15
Stop and go ·················································· 17
Auto-immobilized mode··································· 18
Alarm indication············································· 18
Manual disarm ·············································· 19
Use PIN secure code procedure ···················· 19
How to use PIN code to disarm the system ········ 20
How to change PIN code for security needs ········ 20

Genius Car Alarm
www.alarmasgenius.com
5
Learn codes of the new remote transmitter ········ 21
Reminder of allowed number of remotes ··········· 22
PIN Switch test for alert L E D ·························· 22
Indicator alert L E D table ······························· 23
Hopping code transition ·································23
Low battery indicator for transmitter ················ 23
Out-of-range indication ·································· 24
Transmitter’s button locked/unlocked ················ 24
Transmitter light ········································· 24
Other Remote control Function ························· 25
Remote engine start and shutdown ··················· 27
Fixed time auto-start······································· 27
Extra engine running timer ····························· 28
Alarm installation guide
Main system wire guide··································· 29
Alarm function RF program ······························ 31
Restore RF alarm function to factory default ········ 31
Alarm function RF program table······················· 32
Alarm function RF program table explanation ······ 33
Door lock wire diagrams·································· 36
Alarm module wiring diagram ··························· 38
Start function RF program································ 39
Restore RF start function to factory default·········· 39
Start function RF program table ························ 40
Start function RF program table explanation ········ 41
Engine start module wire guide························· 42

Genius Car Alarm
www.alarmasgenius.com
6
2- way LCD transmitter
One way transmitter
The 2-way LCD transmitter displays more the 20 different screen
to provide real-time indications for feature activation and system
status. The different display indication are shown below for
reference

Genius Car Alarm
www.alarmasgenius.com
7
1. Disarm
2. Audible arm
3. Silent arm
4. Shock trigger bypass
5. Button locked
6. Warn-away trigger
7. Shock trigger
8. Door open
9. Hood open
10. Trunk open
11. Valet mode
12. Anti-carjack
13. Ignition key on
14. Auto immobilize
15. Auto arm
16. Brake pedal
17. Engine running
18. Fixed auto start
19. Receiver indicator
20. Low battery

Genius Car Alarm
www.alarmasgenius.com
8
Transmitter control quick function table
The two-way and one-way remotes’ function table
•Indicates“Pressandrelease”ofspecifiedbutton
For2wayremote,itindicates“Pressandholdspecifiedbutton”for1
second (LCD vibrates and beeps) for level shift
Foronewayremote,itindicates“Pressandholdspecifiedbutton”for1
second (LED lights green) for level shift
••(S1 ) Indicates “Press button twice within 1 sec”.
1
2 
3 
Function
4 
5
Arm (Lock)
1 •
Ignition OFF
Disarm (Unlock)
2 •
Ignition OFF
Lock
1 •
Ignition ON
Unlock
2 •
Ignition ON
All Shock Sensor by
pass
1 •• (s1)
At armed
Valet Mode On/ Off
1 1•
At disarm mode
Audible /Silent choice
4 •
Ignition OFF
Remote Engine Start&
shutoff
2 2•needESM
Ignition OFF
Fixed auto start
2 1•needESM
Ignition OFF
Stop and go
2 •1•
Ignition ON
Check status
3 •
Any time
Car Finder
3 •• (s1 )
Any time
Trunk Release
3 3•
Any time
Panic
1 with 2 
Ignition OFF
Remote Anti carjack On
1 with 2 
Ignition ON
Remote Anti carjack Off
2 •
Any time
Immobilize On/Off
2 3•
Any time
Last door arm On/Off
2 4•
Any time
Button lock On
1 with 4 (pressandhold1sec)
Any time
Button lock On
2 with 4 (pressandhold1sec)
Any time
Adjust shock sensor
4 4•
At disarm
Reset/lamp
5 •
Other function

Genius Car Alarm
www.alarmasgenius.com
9
Multi-function switch quick function table
Function
Multi-functio
n switch
Process
To turn on
anti-hijack
stand-by
Press 1 time
switch LED
and parking
light one time
System enters anti-carjack
stand-by. If triggered by
door, Anti-carjack first
stage is initiated
To turn off
anti-hijack
stand-by
Press 1 time
switch again
LED and parking flash
three time or If ignition is
turned off, anti-carjack
standby mode was cleared
At anti-hijack at
first trigger stage
turn off
Hold switch 3
sec siren
chips
If ignition turn-off is
followed by siren chirps.
Anti-carjack mode was
cleared
At anti-hijack at
full stage trigger
turn Off
Hold switch 3
sec siren
chips
If ignition turn-off is
followed by siren chirps.
Anti-carjack mode is
cleared, but still in
arm/lock mode
At normal time
Valet mode
On/Off
Hold switch 3
sec siren
chips
If ignition turn-off is
followed by siren chirps
Valet mode On/OFF
Manual
disarm
Press 3times ,
siren chips
Ignition off siren chips =
Manual disarm system.
If ignition turn-off is
followed by siren chirps.
Manual disarm is done.
Ignition must be ON
Manual
arm
Then
open car
door
Press 3times,
siren chips
If ignition turn-off is
followed by siren chirps..
Then 20 sec later, system
enters arm mode..

Genius Car Alarm
www.alarmasgenius.com
10
Function
Multi
function
switch
Process
Immobilize
active reset
Off
Press 1 time
switch
Disable Immobilized function
Reset new
PIN code
Press 4
times, siren
chips
Ignition ONPress 1 times
siren chips = Set 1st new PIN
codePress 1 times siren chips
= Set 2nd new PIN code
Alarm
function
programmable
Press 5
times, siren
chips
If ignition turn-off is followed
by siren chirps. System enters
alarm function programmable
stage.
Start function
programmable
Press 6
times, siren
chips
If ignition turn-off is followed
by siren chirps. System enters
start function programmable
stage.
Learn codes
of new
remote.
Press 7
times, siren
chips
Ignition On is followed by
siren chirps system enter learn
codes mode.
Reset to alarm
function
factory default
Press 9times
siren chips
Ignition On is followed by
siren chirps. Press switch one
time, system chirps, press
remote buttonSystem
resets function to factory
default
Ignition must be OFF
Reset to start
function
factory default
Press 10
times siren
chips
Ignition On is followed by
siren chirps. Press switch one
time, system chirps, press
remote buttonSystem
resets function to factory
default