Genius DPF-101K User manual

English
1
For Your Safety: Read this user guide carefully to ensure proper use of the product and to avoid
any danger or physical damage.
Use your player properly to prevent explosion, fire, electric shock, etc.
1. Do not repair the player by yourself, or your warranty will expire.
2. Do not get the player wet or drop it in water.
3. Backup important data to your personal computer as repair or other causes may result in data loss.
4. Always use the accessories provided by or approved by our company, and do not spray water on
the player.
5. The user guide is for reference only.
zFunction Features
A. 1-inch color display
B. Stores up to 70~74 images using the bundled photo software
C. Supports JPEG/BMP Photo slide show playback
D. Real-time clock and calendar display
E. Schedule turn on/off setting
.
zComponents and button functions
zPackage contents
¾DPF-101K ¾USB cable ¾User’s manual
¾CD-ROM with photo compression software
zCharging the battery of DPF-101K
¾Turn on the DPF-101K first and connect PC and DPF-101K with the provided USB cable.
¾You will see “USB charge” and “USB update” display on the DPF-101K screen. Select “USB charge” or
“USB update” to charge, if you select “USB charge”, the DPF-101K still can playback photos
automatically. If you select “USB update”, you can copy BMP or JPEG format files into it. The left
bottom of the screen will display the power sign. The charging time is approximately 1.5 hours. The
fully charged battery can playback 3.5 hours continuously.
¾To stop recharging, disconnect the USB cable.
Notes: For first time use, turn on the DPF-101K and your PC to recharge the battery for 2~3 hours.
Strap eyelet
USB cable port
Previous one
Next one
On/Off
/Confirm
button
Reset

English
2
zAdding/Removing pictures into the Photo Viewer.
1. Install the photo viewer driver.
(A) Insert the CD-ROM and install the file “ PhotoViewer” and Follow the on screen instructions.
(B)The application Photo Viewer will be installed on your computer and a shortcut to the application
will appear on your desktop.
<DO NOT LAUNCH THE SOFTWARE YET.>
2. Add pictures into the DPF-101K.
Turn on the DPF-101K, connect the PC USB port and the photo viewer USB port with the provided
USB cable. After a few of seconds, the photo viewer will display:
USB Charge/ USB Update
Select “USB Update” mode.
Note:
1. Do not use “My Computer” → double click “Removable Disk *G: to add photo files into the player, or an
error will occur.
2. When connecting to your PC, do not select “g:” disk when selecting the disk location on the Photo
Viewer software or there will be an error message.
(G:): DPF-101K might not always be shown as (Disk g) when connecting to the PC.
3. You can remove the DPF-101K from the PC directly.
You can see the photos in DPF-101K from this area.
1. Check (A) to select the
photos stored in your
computer.
2. Press (B) to add the photos
to DPF-101K.
3. Press (C) to match photos
to DPF-101K or press (D) to
delete the photo.
4. To rotate photos, press (E).
(The rotate speed depends
on your photo size). You
can also use item (F) to
frame the photo area.

English
3
zBasic operations
Turn power on and play photos
1. Press and hold button (about 3 seconds) until power on then the player will start to playback photos
automatically or manually.
2. After playback of all photos, the player will go on playing continuously no power, then it will power off.
3. When in playback photos, press button, the screen will display the submenu as following: OFF /
Display Mode / Clock Set / Auto ON/OFF / Clock Display / Exit.
Display Mode
Select <Display Mode> by pressing /buttons, then you can select photo browsing mode by
pressing /buttons: <Auto> / <Manual> and press button to confirm.
* <Auto> mode, the player will playback photos automatically
*<manual> mode, you need to press /buttons to browse photos one by one.
Clock Set
Select <Clock Set> by pressing /buttons, and press button to enter, then you can setup the time
and the date (from year to second).
For example, after entering the <Clock set> mode, it will move to the year, then press /buttons to
adjust the year. Then press button to will skip to the month, then you can continue to setup one by one.
Auto ON/OFF
Select <Auto ON/OFF> mode by pressing /buttons, and press button to enter, and you can
setup the Auto ON/OFF time.
Clock Display
Select <Clock Display> mode by pressing /buttons, and press button to enter, then the screen
will display the time and the date that you set.