GNX-10 Installation Guide GenX Mobile, Incorporated
Version 1.01
Confidential and Proprietary 10/ 8/ 004
All Rights Reserved
Page 4 of 4
GNX-10 Specifications
Location Technology: GPS L1 C/A code
Accuracy: 5 meter CEP
Wireless Networks:
• GSM/GPRS (850/1900)
• CDMA 1xRTT (800/1900)
•80 .11 through Ethernet Port
Size: 5.15” x 4 .15” x 0.95”
Weight: 0.5 lbs
Power Input: 8 – 30 Vdc
Power Consumption:
• Full operating mode: 140 mA @ 1 Volt
• Low power active mode: < 10 mA @ 1 Volt
Environmental:
• Operational Temp: - 0° C to +60° C
• Functional Temp: - 0° C to +70° C
• Storage Temp: -40° C to +85° C
• Humidity: 5% to 95% non condensing
• Shock and Vibration: SAE J1455
• EMC/EMI: SAE J 1113
Processing capability:
• 50 Mips equiv at full power
Storage capacity:
• Flash Memory: 1M – 8M Bytes
• NVSRAM: 51 k – 4M Bytes
Low power sensing mode:
• All external input ports
• On board temperature sensor
• On board accelerometer
• Vehicle battery voltage monitor
List of Input/Output
• 1 10Base-T Ethernet Port (full NAT router)
• 1 Serial Interface (AT, PPP, custom)
• 1 Analog input port (0 to supply voltage)
• Discrete vehicle voltage input sensor ports
• Discrete ground sensor ports
• Relay control output port
• 1 Switched 1 v output port
On Board Sensors
• Temperature sensor and Voltage sensor
• axis accelerometer (±1.5g 50-900Hz)
Communication protocols:
• IP, ICMP, UDP, TCP, DNS, DHCP, PPP, TFTP, SMTP,Telnet, and others
