Gevi GEKEZ1403A-U User manual

ELECTRIC KETTLE
INSTRUCTION MANUAL
[email protected]
GEKEZ1403A-U

IMPORTANT SAFEGUARDS
Dear Gevi customer
Gevi have focused on creating perfect home appliance
for our customer. In the past years, it took us time, lots
of research and many prototypes to achieve our goal.
We would like to give you a different using experience.
Thanks for purchasing our Gevi products, you could
search from our official website, to learn more products
information.
1. Read all instructions before using.
2. Before connecting the kettle to the power supply, check that
the voltage indicated on the appliance (underside the kettle
& base) corresponds with the voltage in your home. If this is
not the case, contact your dealer and stop using the kettle.
3. Do not let the cord hang over the edge of a table or counter
or touch a hot surface.
4. Do not place on or near a hot gas or electric burner or in a
heated oven.
5. Do not operate the appliance without water in it to avoid
damaging the heat elements.
6. Ensure that the kettle is used on a firm and flat surface out of
reach of children, this will prevent the kettle from overturning
and avoid damage or injury.
7. To protect against a fire, electric shock or personal injury, do not
immerse cord, electric plugs or kettle in water or other liquids.
8. While water is boiling, or just after the water has been boiled,
avoid contacting with steam from the spout.
9. Always take care to pour boiling water slowly and carefully
without tipping the kettle too fast.
10. Be careful of refilling when the kettle is hot.

11. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliances
by a person responsible for their safety.
12. Children should be supervised to ensure that they do not play
with the appliance.
13. Do not touch the hot surface. Use the handle or the button.
14. The attached base can not be used for other than intended use.
15. Extreme caution must be used when moving an appliance
containing hot water.
16. The appliance is not a toy. Do not let the children play it.
17. The kettle is for household use only. Do not use outdoors.
18. The use of accessories, which are not recommended by the
appliance manufacturer, may result in fire, electric shock or
personal injury.
19. Unplug the kettle from the outlet when not in use and before
cleaning. Allow the kettle to cool before putting on or taking
off parts, and before cleaning the appliance.
20. To disconnect, turn any control to “off,” then remove plug
from wall outlet.
21. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
22. Do not use the appliance for other than intended use.
23. The kettle can only use with the stand provided.
24. If the kettle is overfilled, boiling water may spill out.
25. Always ensure the lid is closed and do not lift it while the
water is boiling. Scalding may occur if the lid is removed
during the brewing cycles.
26. This appliance is intended to be used in household and similar
applications such as:
‒ Staff kitchen areas in shops, offices and other working
environments;
‒ Farm houses;
‒ By clients in hotels, motels and other residential type
environments;
‒ Breakfast type environments.
27. Save these instructions.

USING YOUR WATER KETTLE
This appliance can be used by children aged from 8 years and
above if they have been given supervision or instruction concern-
ing use of the appliance in a safe way and if they understand the
hazards involved. Cleaning and user maintenance shall not be
made by children unless they are older than 8 and supervised.
Keep the appliance and its cord out of reach of children aged less
than 8 years.
KNOW YOUR WATER KETTLE
Body
Spout
Kettle lid Lid release button
Handle
Water level gauge
Switch
(with indicator)
Power base
Handle Cover
1. Place the kettle on the flat surface.
2. To fill the kettle, remove it from the power base and open the
lid by pressing down lid release button, then fill the kettle with
the desired amount of water and close the lid. The water level
must be within the Min and the Max level. Too little water will
cause the kettle switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water
may spill out of the spout when boiling. Ensure that the lid is
firmly in place before plugging the power outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press down the switch
and the indicator will light up, and then the kettle starts to boil
the water. The kettle will switch off automatically once the
water has boiled. If necessary, it will take you 30 seconds to
wait before pressing the switch again to re-boil the water. You
may shut off the power by lifting switch up or directly lift the
kettle from the power base at any moment to stop boiling
process.
NOTE: Ensure that switch is free of obstructions and the lid is
firmly closed, the kettle will not turn off if the switch if be
constrained or if the lid is opening.

BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water,
the function of boil-dry protection will automatically switch off
the power. If this occurs, allow the kettle to cool prior to filling
with cold water before re-boiling.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and
cool it down completely before cleaning.
Never immerse the kettle, power cord or power base in
water, or allow moisture to contact with these parts.
Wipe the appearance of body with a damp cloth or cleaner,
never use a poisonous cleaner.
Remember to clean the filter at intervals. For easier
cleaning, detach the filter by pressing down the tab of filter
inside the kettle and then replace it after cleaning.
CAUTION: Do not use chemical, steel, wooden or abrasive
cleaners to clean the outside of the kettle to prevent the
gloss loss.
When not use or storage, the power cord may be wind
under the bottom of kettle.under the bottom of kettle.
1.
2.
3.
4.
5. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle
as boiling water may result in scald, besides, don’t open the lid
while the water in the kettle is hot.
6. The kettle will not re-boil until the switch is pressed again. The
kettle may be stored on the power base when not in use.
NOTE: Always disconnect the power supply when not use.

REMOVAL OF MINERAL DEPOSITS
Fill the kettle with 3 cups of white vinegar, then adding
water to the amount so as to cover the bottom of kettle
completely. Leave the solution in the kettle overnight.
Then discard the mixture in the kettle, then filling the kettle
with clean water to the maximum position, boiling and
then discard the water. Repeat several times until the odor
of vinegar has been flushes away. Any stains remaining
inside the spout can be removed by rubbing with a damp
cloth.
1.
2.
ENVIRONMENT FRIENDLY DISPOSAL
Your kettle should be periodically descaled as the mineral
deposits in tap water may form scale on the bottom of kettle so
as to cause the operation less efficiency. You can use the
commercially available descaler and follow the instructions on
the package of descaler. Alternatively, you may follow below
instructions using the white vinegar.
You can help protect the environment!
Please remember to respect the local regulations:
hand in the non-working electrical equipments to
an appropriate waste disposal center.