Gigabyte XPower GH-PSU11-PD User manual

GH-PSU11-PD
Installation Guide
Product installaon
( AMD K8 / AM2 )
Apply the thermal grease
evenly over the CPU surface.
Apply a generous amount of
thermal grease.
Step 1 Step 2
Clip the short end of the
mounng clip on the CPU
socket.
Push down on the cooler
unl it is flush against the
CPU.
Step 3
Step 6
Plug the 4-pin connector
of the cooler into the
motherboard’s CPU fan
socket.
Step 4
Press the lever side of the
mounng clip unll it has
clipped in.
Check if the cooler is
mounted firmly.
Step 5
Product installaon
(Intel LGA 1156 / 775)
Affix the LGA 1156 / 775
bracket to the MB with the
buckles included.
Step 1 Step 2Step 2
Apply the thermal grease
evenly over the CPU surface.
Apply a generous amount of
thermal grease.
Clip the short end of the
mounng clip on the CPU
socket.
Step 3 Step 4
Push down on the cooler
unl it is flush against the
CPU.
Press the lever side of the
mounng clip unl it has
clipped in.
Step 5 Step 6
Check if the cooler is
mounted firmly.
Extra cooling fan installaon
Insert the 4 fan rubber pad
mounts.
Step 1
Fit addional fan against
the rubber pad mounts
and pull to secure.
Note: 1. Fan size is 9cm
2. Make sure the air flow of both fans
are in the same direcon.
Incorrect Correct
Plug the 4-pin connector
of the cooler into the
motherboard’s CPU fan
socket.
Step 7
1. Compable with LGA 1156 / 775 & AMD K8 / AM2 CPU plaorms.
2. 9cm smart PWM fan with max RPM up to 2800RPM.
3. Special design enabling the mount of an addional fan.
4. Highly conducve heat pipe providing extreme heat dissipaon.
5. Special aluminum fin design with large heat dissipaon surface area.
6. Direct contact of CPU against heat pipes for efficient heat transfer.
7. Hassle free installaon.
Features
Cooler dimensions: 96x78x122 mm
Fan dimensions: 92x92x25 mm
Heat pipe count: 3
Heat sink material: Aluminum
Input voltage: 12V
Input current: 0.23Amp
Fan speed: 2800 RPM
Noise: 32dBA at full speed
Bearing type: Rifle Bearing
Fan MTBF: 40,000hr
Specificaons Support list
The following is not covered by warranty:
1. Incorrect usage or in a manner other than the designed purpose.
2. Nonobservance of its proper operaon. ( e.g. over-clocking )
3. Malfuncon due to interference from other devices.
4. Unauthorized modificaon of the product.
5. Malfuncon due to unfit specificaons on applied Motherboard.
6. Malfuncon arising from natural disasters ( earthquake, thunder, fire and flood ).
7. Romoval of or damaged warranty label.
8. The devices inside, including power supply, hard disk, CD-ROM drive, motherboard, cooler, etc,
are not detached from the chassis prior to the transportaon, resulng in damage to the
cooler or computer-related devices.
9. Any damage caused by nonobservance of the installaon instrucon contained in this manual.
CAUTION The cooler fan speed levels provided are for reference use only.
Please refer to the motherboard BIOS to verify actual fan speed levels.
Intel® CoreTM i5 / i3 Processor Series
Intel® CoreTM 2 Extreme Processor Series
Intel® CoreTM 2 Quad Processor Series
Intel® CoreTM 2 Duo Processor Series
Intel® Penum® Extreme Edion Series
Intel® Penum® D Processor Series
Intel® Penum® 4 Processor Series (LGA775)
AMD AM2
AMD AthlonTM FX Series
AMD AthlonTM 64x2 Series
AMD AthlonTM 64 Series
AMD Sempron Series
Accessory
Thermal Grease LGA 1156 BracketLGA 775 Bracket Fan Mounng Rubber Pad