Gigabyte GA-MA790FX-UD5P User manual

GA-MA790FX-UD5P
AM2+/AM2 socket motherboard for
AMD PhenomTM II X3 processor/AMD PhenomTM II X4 processor/
AMD PhenomTM FX processor/AMD PhenomTM X4 processor/
AMD PhenomTM X3 processor/AMDAthlonTM X2 processor/
AMDAthlonTM processor/AMD SempronTM X2 processor/
AMD SempronTM processor
User's Manual
Rev.1001
12ME-MA79F5P-1001R

Motherboard
GA-MA790FX-UD5P
Feb. 20, 2009
Feb. 20, 2009
Motherboard
GA-MA790FX-UD5P

Copyright
©2009 GIGA-BYTE TECHNOLOGYCO., LTD.All rights reserved.
Thetrademarksmentionedinthismanualarelegallyregisteredtotheirrespectiveowners.
Disclaimer
Informationinthismanualisprotected bycopyrightlaws andisthe propertyofGIGABYTE.
ChangestothespecificationsandfeaturesinthismanualmaybemadebyGIGABYTEwithoutprior
notice. Nopartofthismanualmaybereproduced,copied,translated,transmitted,orpublishedinany
formorbyanymeanswithout GIGABYTE's prior written permission.
Documentation Classifications
Inordertoassistintheuseofthisproduct,GIGABYTEprovidesthefollowingtypesofdocumentations:
Forquickset-upoftheproduct,readtheQuickInstallationGuideincludedwiththeproduct.
Fordetailedproductinformation,carefullyreadtheUser'sManual.
For instructions on how to use GIGABYTE's unique features, read or download the
informationon/fromtheSupport\Motherboard\TechnologyGuidepageonourwebsite.
Forproduct-relatedinformation,checkonourwebsiteat:
http://www.gigabyte.com.tw
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"
means the revision of the motherboard is 1.0. Check your motherboard revision before updating
motherboardBIOS,drivers,orwhenlookingfortechnicalinformation.
Example:

- 4 -
Table of Contents
BoxContents ................................................................................................................. 6
OptionalItems................................................................................................................. 6
GA-MA790FX-UD5PMotherboard Layout..................................................................... 7
BlockDiagram................................................................................................................ 8
Chapter 1 HardwareInstallation .................................................................................... 9
1-1 InstallationPrecautions ..................................................................................... 9
1-2 ProductSpecifications .................................................................................... 10
1-3 Installing the CPU and CPU Cooler.............................................................. 13
1-3-1 Installing the CPU ................................................................................................ 13
1-3-2 Installing the CPU Cooler ................................................................................... 15
1-4 InstallingtheMemory ..................................................................................... 16
1-4-1 Dual Channel Memory Configuration................................................................ 16
1-4-2 Installing a Memory............................................................................................. 17
1-5 InstallinganExpansion Card ......................................................................... 18
1-6 Configuring anATI CrossFireXTM System ...................................................... 19
1-7 InstallingtheSATABracket ............................................................................. 20
1-8 BackPanelConnectors ................................................................................. 21
1-9 OnboardSwitches.......................................................................................... 23
1-10 InternalConnectors ........................................................................................ 24
Chapter 2 BIOSSetup................................................................................................. 37
2-1 StartupScreen................................................................................................ 38
2-2 TheMainMenu .............................................................................................. 39
2-3 MBIntelligentTweaker(M.I.T.)....................................................................... 41
2-4 StandardCMOSFeatures ............................................................................. 46
2-5 Advanced BIOS Features.............................................................................. 48
2-6 IntegratedPeripherals ..................................................................................... 50
2-7 PowerManagementSetup ............................................................................. 54
2-8 PC HealthStatus ........................................................................................... 56
2-9 LoadFail-SafeDefaults................................................................................... 58
2-10 LoadOptimizedDefaults ................................................................................. 58
2-11 Set Supervisor/User Password..................................................................... 59
2-12 Save & Exit Setup......................................................................................... 60
2-13 ExitWithoutSaving ....................................................................................... 60

- 5 -
Chapter 3 DriversInstallation ...................................................................................... 61
3-1 InstallingChipsetDrivers ............................................................................... 61
3-2 ApplicationSoftware....................................................................................... 62
3-3 TechnicalManuals.......................................................................................... 62
3-4 Contact........................................................................................................... 63
3-5 System........................................................................................................... 63
3-6 DownloadCenter............................................................................................ 64
Chapter 4 Unique Features......................................................................................... 65
4-1 XpressRecovery2 ......................................................................................... 65
4-2 BIOS Update Utilities..................................................................................... 68
4-2-1 Updating the BIOS with the Q-Flash Utility...................................................... 68
4-2-2 Updating the BIOS with the @BIOS Utility ....................................................... 71
4-3 EasyTune6.................................................................................................... 72
4-4 Easy Energy Saver ...................................................................................... 73
4-5 Q-Share ......................................................................................................... 75
4-6 TimeRepair .................................................................................................... 76
4-7 Teaming.......................................................................................................... 77
Chapter 5 Appendix .................................................................................................... 79
5-1 ConfiguringSATAHardDrive(s) .................................................................... 79
5-1-1 Configuring AMD SB750 SATA Controllers ...................................................... 79
5-1-2 Configuring GIGABYTE SATA2 SATA Controller ............................................. 85
5-1-3 Making a SATA RAID/AHCI Driver Diskette for Windows XP........................ 91
5-1-4 Installing the SATA RAID/AHCI Driver and Operating System ...................... 92
5-2 ConfiguringAudioInputandOutput ............................................................... 101
5-2-1 Configuring 2/4/5.1/7.1-Channel Audio .......................................................... 101
5-2-2 Configuring S/PDIF In/Out ................................................................................ 103
5-2-3 Enabling the Dolby Home Theater Function .................................................. 105
5-2-4 Configuring Microphone Recording ................................................................. 106
5-2-5 Using the Sound Recorder............................................................................... 108
5-3 Troubleshooting ............................................................................................. 109
5-3-1 Frequently Asked Questions ........................................................................... 109
5-3-2 Troubleshooting Procedure .............................................................................. 110
5-4 RegulatoryStatements ..................................................................................112

- 6 -
Box Contents
GA-MA790FX-UD5Pmotherboard
Motherboarddriverdisk
User'sManual
QuickInstallationGuide
OneIDEcableand one floppy diskdrivecable
FourSATA3Gb/scables
OneSATAbracket
I/O Shield
Optional Items
2-portUSB2.0bracket(PartNo.12CR1-1UB030-5*R)
2-portIEEE 1394abracket(PartNo.12CF1-1IE008-0*R)
2-portSATApower cable (PartNo.12CF1-2SERPW-0*R)
COM port cable (Part No. 12CF1-1CM001-3*R)
S/PDIF in and out cable (Part No. 12CR1-1SPINO-1*R)
LPTportcable(PartNo.12CF1-1LP001-0*R)
•Theboxcontentsabovearefor reference only and theactualitemsshalldependonproduct package you obtain.
Thebox contents are subject tochange withoutnotice.
•Themotherboardimageisforreferenceonly.

- 7 -
GA-MA790FX-UD5P Motherboard Layout
Socket AM2
GA-MA790FX-UD5P
DDR2_1
DDR2_2
DDR2_3
DDR2_4
FDD
SYS_FAN1
CI
F_PANEL
B_ BIOS
CD_IN
IT8720
CODEC
AMD 790FX
RTL
8111DL
SPDIF_IO
AMD SB750
PCIEX1_1
PCI1
PCI2
PCIEX1_2
PCIEX16_1
PCIEX1_3
PCIEX16_2
COM
TSB43AB23
ATX
IDE
PWR_FAN
KB_MS
USB LAN1
F_AUDIO
AUDIO
BATTERY
ATX_12V_2X4
USB LAN2
CPU_FAN
SYS_FAN2
RCA SPDIF
M_ BIOS
LPT
F_USB1
PWR_LED
F_USB2
F_1394
CLR_CMOS
USB 1394_2
USB 1394_1
GIGABYTE
SATA2
SATA2_5
SATA2_4
SATA2_3
SATA2_2
SATA2_1
SATA2_0
GSATA2_0
GSATA2_1
CMOS_SW
PW_SW
RST_SW
RTL
8111DL
NB_FAN

- 8 -
Block Diagram
AM3/AM2+/AM2
CPU
CPU CLK+/-(200 MHz)
Hyper Transport 3.0
AMD 790FX
DDR2 1333(O.C.)/1066/800 MHzDIMM
Dual Channel Memory
6 SATA 3Gb/s
ATA-133/100/66/33
IDE Channel
LPC BUS
AMD SB750
12 USB Ports
Line-Out
MIC
CODEC
Line-In
SPDIF In
SPDIF Out
Side Speaker Out
Center/Subwoofer Speaker Out
Surround Speaker Out
2 PCI
PCI Bus
3 IEEE 1394a
TSB43AB23 LPT Port
Floppy
COM Port
PS/2 KB/Mouse
IT8720
Dual BIOS
PCIeCLK
(100MHz)
3 PCI Express x1
PCI Express Bus x1
x1 x1 x1 x1
RTL
8111DL
LAN2
RJ45
x1
RTL
8111DL
LAN1
RJ45
2SATA3Gb/s GIGABYTE
SATA2
PCI Express x16
2 PCIe x16
PCIe CLK
(100 MHz)

Hardware Installation- 9 -
1-1 Installation Precautions
Themotherboardcontainsnumerousdelicateelectroniccircuitsandcomponentswhichcanbecome
damagedasaresult of electrostaticdischarge(ESD).Prior to installation, carefullyreadtheuser's
manualandfollowtheseprocedures:
•Priortoinstallation,donotremoveorbreakmotherboardS/N(SerialNumber)stickeror
warrantystickerprovidedbyyourdealer.Thesestickersarerequiredforwarrantyvalidation.
•AlwaysremovetheACpowerbyunpluggingthe powercordfrom thepoweroutletbefore
installingorremovingthemotherboardorotherhardwarecomponents.
•Whenconnectinghardwarecomponentstotheinternalconnectorsonthemotherboard,
makesuretheyareconnectedtightlyandsecurely.
•Whenhandlingthemotherboard,avoidtouchinganymetalleadsorconnectors.
•Itisbesttowearanelectrostaticdischarge(ESD)wriststrapwhenhandlingelectronic
componentssuchasamotherboard,CPUormemory.IfyoudonothaveanESDwriststrap,
keepyourhandsdryandfirsttouchametalobjecttoeliminatestaticelectricity.
•Priortoinstallingthemotherboard,pleasehaveitontopofanantistaticpadorwithinan
electrostaticshieldingcontainer.
•Beforeunpluggingthepowersupplycablefromthemotherboard,makesurethepowersupply
hasbeenturnedoff.
•Beforeturningonthepower,makesurethepowersupplyvoltagehasbeensetaccordingto
thelocalvoltagestandard.
•Beforeusingtheproduct,pleaseverifythatallcablesandpowerconnectorsofyourhardware
componentsareconnected.
•Topreventdamagetothemotherboard,donotallowscrewstocomeincontactwiththe
motherboardcircuitoritscomponents.
•Makesuretherearenoleftoverscrewsormetalcomponentsplacedonthemotherboardor
withinthecomputercasing.
•Donotplacethecomputersystemonanunevensurface
.
•Donotplacethecomputersysteminahigh-temperatureenvironment.
•Turningonthecomputerpowerduringtheinstallationprocesscanleadtodamagetosystem
componentsaswell asphysicalharm totheuser.
•Ifyouareuncertainaboutanyinstallationstepsorhaveaproblemrelatedtotheuseofthe
product,pleaseconsultacertifiedcomputertechnician.
Chapter 1 Hardware Installation

GA-MA790FX-UD5P Motherboard - 10 -
1-2 Product Specifications
CPU Support for AM3/AM2+/AM2 processors:
AMD PhenomTM II X3 processor/AMD PhenomTM II X4 processor
AMD PhenomTM FX processor/AMD PhenomTM X4 processor/
AMD PhenomTM X3 processor/AMD AthlonTM X2 processor/
AMD AthlonTM processor/AMD SempronTM X2 processor/
AMD SempronTM processor
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport Bus 5200/2000 MT/s
Chipset North Bridge: AMD 790FX
South Bridge: AMD SB750
Memory 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1)
Dual channel memory architecture
Support for DDR2 1333(O.C.)/1066/800 MHz memory modules
(Go to GIGABYTE's website for the latest memory support list.)
Audio Realtek ALC889A codec
High Definition Audio
2/4/5.1/7.1-channel
Support for Dolby®Home Theater
Support for S/PDIF In/Out
Support for CD In
LAN 2 x Realtek 8111DL chips (10/100/1000 Mbit)
Support for Teaming
Expansion Slots 2 x PCI Express x16 slots, running at x16
(The PCIEX16_1 and PCIEX16_2 slots support ATI CrossFireXTM
technology and conform to PCI Express 2.0 standard.)
3 x PCI Express x1 slots
2 x PCI slots
Storage Interface South Bridge:
- 1 x IDE connector supportingATA-133/100/66/33 and up to 2 IDE devices
- 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3,
SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, RAID 10 and JBOD
GIGABYTE SATA2 chip:
- 2 x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1) supporting up to
2 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1 and JBOD
iTE IT8720 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394 T.I. TSB43AB23 chip
Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket
connected to the internal IEEE 1394a header)
USB Integrated in the South Bridge
Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets
connected to the internal USB headers)

Hardware Installation- 11 -
Internal Connectors 1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x floppy disk drive connector
1 x IDE connector
8 x SATA 3Gb/s connectors
1 x CPU fan header
2 x system fan headers
1 x power fan header
1 x North Bridge fan header
1 x front panel header
1 x front panel audio header
1 x CD In connector
1 x S/PDIF In/Out header
1 x IEEE 1394a header
2 x USB 2.0/1.1 headers
1 x parallel port header
1 x serial port header
1 x chassis intrusion header
1 x power LED header
1 x power switch
1 x reset switch
1 x clearing CMOS switch
Back Panel 1 x PS/2 keyboard port
Connectors 1 x PS/2 mouse port
1 x coaxial S/PDIF Out connector
1 x optical S/PDIF Out connector
2 x IEEE 1394a ports
8 x USB 2.0/1.1 ports
2 x RJ-45 ports
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side
Speaker Out/Line In/Line Out/Microphone)
I/O Controller iTE IT8720 chip
Hardware Monitor System voltage detection
CPU/System temperature detection
CPU/System/Power fan speed detection
CPU overheating warning
CPU/System/North Bridge/Power fan fail warning
CPU/System fan speed control (Note 2)
BIOS 2 x 8 Mbit flash
Use of licensed AWARD BIOS
Support for DualBIOSTM
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

GA-MA790FX-UD5P Motherboard - 12 -
Unique Features Support for @BIOS
Support for Q-Flash
Support for Virtual Dual BIOS
Support for Download Center
Support for Xpress Install
Support for Xpress Recovery2
Support for EasyTune(Note 3)
Support for Easy Energy Saver(Note 4)
Support for Time Repair
Support for Q-Share
Bundled Software Norton Internet Security (OEM version)
Operating System Support for Microsoft®Windows®Vista/XP
Form Factor ATX Form Factor; 30.5cm x 24.4cm
(Note 1) Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) Whether the CPU/system fan speed control function is supported will depend on the CPU/
system cooler you install.
(Note 3) Available functions in EasyTune may differ by motherboard model.
(Note 4) Due to the hardware limitation, you must install the AMD AM3 PhenomTM II / AM2+ PhenomTM
Series CPU to enable support for Easy Energy Saver.

Hardware Installation- 13 -
1-3 Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
•Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
•Always turn off the computer and unplug the power cord from the power outlet before
installing the CPU to prevent hardware damage.
•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.
•Apply an even and thin layer of thermal grease on the surface of the CPU.
•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and
damage of the CPU may occur.
•Set the CPU host frequency in accordance with the CPU specifications. It is not recom-
mended that the system bus frequency be set beyond hardware specifications since it
does not meet the standard requirements for the peripherals. If you wish to set the frequency
beyond the standard specifications, please do so according to your hardware specifications
including the CPU, graphics card, memory, hard drive, etc.
1-3-1 Installing the CPU
A. Locate the pin one (denoted by a small triangle) of the CPU socket and the CPU.
AM3/AM2+/AM2CPU
AM2Socket
A Small Triangle Mark
Denotes Pin One of the
Socket
ASmallTriangleMarking
Denotes CPU Pin One

GA-MA790FX-UD5P Motherboard - 14 -
Step 2:
Align the CPU pin one (small triangle marking)
with the triangle mark on the CPU socket and
gently insert the CPU into the socket. Make
sure that the CPU pins fit perfectly into their
holes. Once the CPU is positioned into its
socket, place one finger down on the middle of
the CPU, lowering the locking lever and latch-
ing it into the fully locked position.
Step 1:
Completely lift up the CPU socket locking lever.
CPU Socket Locking
Lever
Do not force the CPU into the CPU socket. The CPU cannot fit in if oriented incorrectly. Adjust
the CPU orientation if this occurs.
B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.
Before installing the CPU, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the CPU.

Hardware Installation- 15 -
Use extreme care when removing the CPU cooler because the thermal grease/tape between
the CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler
may damage the CPU.
1-3-2 Installing the CPU Cooler
Follow the steps below to correctly install the CPU cooler on the CPU. (The following procedure uses
the GIGABYTE cooler as the example.)
Step 1:
Apply an even and thin layer of thermal grease
on the surface of the installed CPU.
Step 2:
Place the CPU cooler on the CPU.
Step 4:
Turn the cam handle from the left side to the
right side (as the picture above shows) to lock
into place. (Refer to your CPU cooler installa-
tion manual for instructions on installing the
cooler.)
Step 3:
Hook the CPU cooler clip to the mounting lug on
one side of the retention frame. On the other side,
push straight down on the the CPU cooler clip to
hook it to the mounting lug on the retention frame.
Step 5:
Finally, attach the power connector of the CPU
cooler to the CPU fan header (CPU_FAN) on
the motherboard.

GA-MA790FX-UD5P Motherboard - 16 -
DDR2_1 DDR2_2 DDR2_3 DDR2_4
1-4 Installing the Memory
Read the following guidelines before you begin to install the memory:
•Make sure that the motherboard supports the memory. It is recommended that memory of
the same capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest memory support list.)
•Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
•Memory modules have a foolproof design. A memory module can be installed in only one
direction. If you are unable to insert the memory, switch the direction.
1-4-1 Dual Channel Memory Configuration
This motherboard provides four DDR2 memory sockets and supports Dual Channel Technology. After
the memory is installed, the BIOS will automatically detect the specifications and
capacity of the memory. Enabling Dual Channel memory mode will double the
original memory bandwidth.
The four DDR2 memory sockets are divided into two channels and each channel has two memory
sockets as following:
Channel 0: DDR2_1, DDR2_3
Channel 1: DDR2_2, DDR2_4
Due to CPU limitation, read the following guidelines before installing the memory in Dual Channel mode.
1. Dual Channel mode cannot be enabled if only one DDR2 memory module is installed.
2. When enabling Dual Channel mode with two or four memory modules, it is recommended that
memory of the same capacity, brand, speed, and chips be used and installed in the same
colored DDR2 sockets for optimum performance.
DualChannelMemoryConfigurationsTable
Two Modules
Four Modules
DDR2_1 DDR2_2 DDR2_3 DDR2_4
DS/SS DS/SS - - - -
- - - - DS/SS DS/SS
DS/SS DS/SS DS/SS DS/SS
If two memory modules are to be installed, it is recom-
mended that you install them in the DDR2_1 and DDR2_2
sockets.

Hardware Installation- 17 -
1-4-2 Installing a Memory
Notch
Before installing a memory module, make sure to turn off the computer and unplug
the power cord from the power outlet to prevent damage to the memory module.
DDR2 DIMMs are not compatible to DDR DIMMs. Be sure to install DDR2 DIMMs on
this motherboard.
DDR2 DIMM
A DDR2 memory module has a notch, so it can only fit in one direction. Follow the steps below to
correctly install your memory modules in the memory sockets.
Step 1:
Note the orientation of the memory module. Spread the retaining
clips at both ends of the memory socket. Place the memory
module on the socket. As indicated in the picture on the left,
place your fingers on the top edge of the memory, push down
on the memory and insert it vertically into the memory socket.
Step 2:
The clips at both ends of the socket will snap into place when
the memory module is securely inserted.

GA-MA790FX-UD5P Motherboard - 18 -
1-5 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card:
•Make sure the motherboard supports the expansion card. Carefully read the manual that
came with your expansion card.
•Always turn off the computer and unplug the power cord from the power outlet before
installing an expansion card to prevent hardware damage.
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover(s).
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for
your expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
Example: Installing and Removing a PCI Express x16 Graphics Card:
•Installing a Graphics Card:
Gently push down on the top edge of the card
until it is fully inserted into the PCI Express x16
slot. Make sure the card is securely seated in
the slot and does not rock.
•Removing the Card from the PCI Express x16 Slot:
Gently push back on the lever on the slot and then lift the card straight out
from the slot.
PCI Express x1 Slot
PCI Slot
PCI Express x16 Slot

Hardware Installation- 19 -
To enable CrossFireXTM technology, you need two graphics cards that supportATI CrossFireTM technology.
Before You Begin--
A. Power Requirements:
Use a power supply that is able to provide sufficient power to fully support an CrossFireX configuration and
other components in your system. We recommend a power supply that provides at least 20A 12V current.
The exact power requirements depend on your overall system configurations.
B. Supported Operating Systems:
Windows Vista and Windows XP.
C. BIOS Settings:
Before configuring your system for CrossFireX, make sure to set Init Display First under Advanced BIOS
Features in BIOS Setup to PEG first. (Start your system with a single PCIe x16 graphics card and then go
to BIOS Setup to set Init Display First to PEG. Then install the second graphics card to enable CrossFireX.)
1-6 Configuring anATI CrossFireXTM System
Enabling CrossFireX Mode--
Connecting Two Graphics Cards:
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install
the graphics cards in the PCIEX16_1 slot and the PCIEX16_2 slot.
Step 2:
Depending on your graphics cards, install the connecting bridges
on the two cards.
(Note:ProcedureforenablingCrossFireXmayslightlydifferbygraphicscards.Refer
tothemanualthatcamewithyourgraphicscardsformoreinformationaboutenabling
CrossFireX.)
Graphics Card Driver Setting:
After installing the graphics card driver in your operating system,
access the Catalyst Control Center. From the CATALYST Con-
trol Center, enter the CrossFire menu and select the Enable
CrossFire checkbox to complete the configuration.
Step 3:
Connect your LCD monitor cable to the DVI port on the graphics
card on the PCIEX16_1 slot (or connect your D-Sub monitor via a
DVI-to-D-Sub adapter).

GA-MA790FX-UD5P Motherboard - 20 -
1-7 Installing the SATABracket
The SATA bracket includes one SATA bracket, one
SATA signal cable, and one SATA power cable.
Step 1:
Locate one free PCI
slot and secure the
SATA bracket to the
chassis back panel
with a screw.
Follow the steps below to install the SATA bracket:
Step 2:
Connect the SATA
cablefrom the bracket
to the SATA port on
your motherboard.
Step 3:
Connect the power
cablefrom the bracket
to the power supply.
Step 4:
Plug one end of the
SATA signal cable into
the external SATA con-
nector on the bracket.
Then attach the SATA
power cable to the
power connector on
the bracket.
The SATA bracket allows you to connect external SATA device(s) to your system by expanding the
internal SATA port(s) to the chassis back panel.
•Turn off your system and the power switch on the power supply before installing or
removing the SATA bracket and SATA power cable to prevent damage to hardware.
•Insert the SATA signal cable and SATA power cable securely into the corresponding connec-
tors when installing.
Step 5:
Connect the other ends of the SATA signal cable and SATA power cable
to your SATA device. For SATA device in external enclosure, you only
need to connect the SATAsignal cable. Before connecting the SATA signal
cable, make sure to turn off the power of the external enclosure.
SATABracket
External
SATA
Connector Power
Connector External SATA
Connector
SATA Signal Cable SATA Power Cable