
Fig. 7
INSTRUCTION MANUAL
Assembled by an adult.
Tube End Cover
IMPORTANT:
This set is intended for adult assembly only. Please read all instructions carefully before beginning.
1. Keep unused parts in the marked bag(s) until required.
Some parts appear similar and may be confused.
2. Assemble each section separately - as shown in the exploded diagrams.
3. If parts need to be loosened, use the included "release pliers" to assist you.
4. After each section is complete, assemble the completed sections together into the final unit.
ASSEMBLY & DISASSEMBLY
ㆍHow to Assemble & Disassemble Tubes and Connectors
Note: Do not hold a tube or connector
where the insertion takes place,
fingers may be pinched.
(1) Push the corner connector onto
the tube and twist the tube until a
"click" is heard.
(3) Position the release plier nodes
over the holes where the safety
lock pins are visible. Squeeze
gently to release the tube from the
connector.